Endurance T50 User manual

v. 091709
T50
Endurance®T50 Treadmill
User Manual
v. T50-040516

I. REFERENCE DRAWINGS..............................
II. BEFORE YOU BEGIN.....................................
III. IMPORTANT SAFETY INSTRUCTIONS.........
IV. SAFETY GUIDELINES....................................
V. ASSEMBLY INSTRUCTIONS..........................
VI. ASSEMBLY STEPS........................................
VII. SETTING UP YOUR TREADMILL...................
VIII. OPERATING YOUR TREADMILL...................
IX. OPERATING THE CONSOLE.........................
X. EXERCISE TIPS AND GUIDELINES..............
XI. MAINTENANCE...............................................
XII. TROUBLESHOOTING.....................................
XIII. TROUBLESHOOTING GUIDE........................
XIV. HARDWARE....................................................
XV. HARDWARE LIST...........................................
XVI. WIRING DIAGRAM..........................................
XVII. NOTES............................................................
XVIII. EXPLODED VIEW DIAGRAM..........................
3
4
5
6 – 8
9
10 – 19
20
21– 22
23– 25
26 – 27
28 – 31
32 – 33
34
35
36 – 39
40
41
42 – 43
Table of Contents
2

Note: Due to continuing product improvements, specications and designs
are subject to change without notice.
Even though we have prepared this manual with extreme care, neither
the publisher nor the author can accept responsibility for any errors in,
or omission from, the information given.
Reference Drawings
3

Thank you for purchasing the Endurance T50 Treadmill.
To maximize your use of the equipment please study this Owner’s Manual thoroughly.
UNPACKING THE EQUIPMENT
The T50 is carefully tested and inspected before shipment. We have shipped the unit in
several pieces that require assembly. Ask for assistance during the assembly process.
CAUTION
Remove the Right and Left Uprights, Console and packing material carefully.
Hold the treadmill on each side and lift it out from the box carefully.
Position the treadmill on a at level surface.
Read the Owner’s Manual carefully before attempting to assemble the treadmill.
Endurance Equipment continually seeks ways to improve the performance, specications and product manuals in order to ensure that
only superior products are released from our factories. Please take the time to carefully read through this manual thoroughly.
Instructions contained in this document are not intended to cover all details or variations possible with Endurance Equipment, or to
cover every contingency that may be met in conjunction with installation, operation, maintenance or troubleshooting of the equipment.
Even though we have prepared this manual with extreme care, neither the publisher nor the author can accept responsibility for any
errors in, or omission from, the information given. Should additional information be required, or should situations arise that are not
covered by this manual, the matter should be directed to your local Endurance Equipment representative, or the Service Department
at Endurance Equipment in Forest Park, Illinois.
Any Questions?
Call [phone]
Before you Begin
4

Before beginning any tness program, you should obtain a complete physical examination
from your physician.
Il est conseille de subir un examen medical complet avant d’entreprendre tout programme d’exercise. Si vous
avez des etourdissements ou des faiblesses, arretez les exercices immediatement.
When using exercise equipment, you should always take basic precautions,
including the following:
Read all instructions before using the T50. These instructions are written to
ensure your safety and to protect the unit.
 Do not allow children on or near the equipment.
 Use the equipment only for its intended purpose as described in this guide.
Do not use accessory attachments that are not recommended by the manufacturer.
Such attachments might cause injuries.
 Wear proper exercise clothing and shoes for your workout, no loose clothing.
 Use care when getting on or off the unit.
 Do not overexert yourself or work to exhaustion.
 If you feel any pain or abnormal symptoms, stop your workout immediately and
consult your physician.
 Never operate the unit after it has been dropped or damaged.
Return the equipment to a service center for examination and repair.
 Never drop or insert objects into any opening in the equipment.
 Always check the unit before each use.
Make sure that all fasteners are secure and in good working condition.
 Do not use the equipment outdoors or near water.
PERSONAL SAFETY DURING ASSEMBLY
 It is strongly recommended that a qualied dealer assemble the equipment.
Assistance is required.
 Before beginning assembly, please take the time to read the instructions thoroughly.
 Read each step in the assembly instructions and follow the steps in sequence.
Do not skip ahead. If you skip ahead, you may learn later that you have to
disassemble components and that you may have damaged the equipment.
 Assemble and operate the T50 on a solid, level surface.
Locate the unit a few feet from the walls or furniture to provide easy access.
The T50 is designed for your enjoyment. By following these precautions and using common
sense, you will have many safe and pleasurable hours of healthful exercise with your
Endurance T50.
After assembly, you should check all functions to ensure correct operation. If you experience
problems, rst recheck the assembly instructions to locate any possible errors made during
assembly. If you are unable to correct the problem, call the dealer from whom you purchased
the machine or call 1-800-556-3113 for the dealer nearest you.
Important Safety Instructions
5

Successful cardio training programs have one prominent feature in common...safety.
Cardio training has some inherent dangers, as do all physical activities.
The chance of injury can be greatly reduced or completely removed by using correct
running techniques, proper breathing, maintaining equipment in good working
condition, and by wearing the appropriate clothing.

It is highly recommended that you consult your physician before beginning
any exercise program. This is especially important for individuals over the
age of 35, or persons with pre-existing health problems.
 Always warm up before starting a workout. Try to do a total body warm up
before you start. It is especially important to warm up the specic muscle
groups you are going to be using. This can be as simple as performing a
warm up set of high repetitions and light weight for each exercise.
 Always wear appropriate clothing and shoes when exercising.
Wearing comfortable athletic shoes with good support and loose tting,
breathable clothing will reduce the risk of injury.
 Maintaining equipment in proper operating condition is of utmost
importance for a safe cardio training program.
 Read and study all warning labels on this machine. It is absolutely
necessary that you familiarize yourself and all others with the proper
operation of this machine prior to use.
 Keep hands, limbs, loose clothing and long hair well out of the way of all
moving parts.
 Inspect the machine daily for loose or worn parts. If a problem is found do
not allow the machine to be used until all parts are tightened or worn or
defective parts are repaired or replaced.
Safety Guidelines
6

power requirements
POWER REQUIREMENTS
conductor and a grounding plug.
Always plug the power cord into a
surge protector, and plug the surge
protector into an appropriate outlet
that is properly installed and
grounded in accordance with all local
codes and ordinances.
This product is for use on a nominal
120-volt circuit, and has a grounding
plug that looks like the plug illustrated
in the drawing below.
Power Requirements:
IMPROPER CONNECTION OF
THE EQUIPMENT GROUNDING
CONNECTOR CAN RESULT IN A
RISK OF AN ELECTRIC SHOCK.
CHECK WITH A QUALIFIED
ELECTRICIAN OR SERVICE MAN
IF YOU ARE IN DOUBT AS TO
WHETHER THE PRODUCT IS
PROPERLY GROUNDED. DO NOT
MODIFY THE PLUG PROVIDED
WITH THE PRODUCT, IF IT WILL
NOT FIT THE OUTLET, HAVE A
PROPER OUTLET INSTALLED BY
A QUALIFIED ELECTRICIAN.
This treadmill can be seriously
damaged by sudden voltage
changes in your home’s electrical
power. Voltage spikes, surges and
noise interference can result from
weather conditions or from other
appliances being turned on or off.
To reduce the possibility of treadmill
damage, always use a surge
protector (not included ) with your
treadmill.
Surge protectors can be purchased
at most hardware stores. The
manufacturer recommends a single
outlet surge protector with a UL 1449
rating as a Transient Voltage Surge
Suppressor (TVSS) with a UL
suppressed voltage rating of 400V
or less and an electrical rating
120VAC,15 amps.
This treadmill must be grounded to
reduce the risk of electrical shock.
Grounding provides a path of least
resistance for electric current, should
the treadmill malfunction. This
treadmill comes with an electrical
cord having an equipment-grounding
-3-
SURGE PROTECTOR
GROUNDING PLUG
SURGE PROTECTOR
GROUNDING PIN
GROUNDING OUTLET
TREADMILL POWER CORD
ADAPTOR
SCREW
GROUNDING OUTLET
SURGE PROTECTOR
GROUNDING PLUG
power requirements
POWER REQUIREMENTS
conductor and a grounding plug.
Always plug the power cord into a
surge protector, and plug the surge
protector into an appropriate outlet
that is properly installed and
grounded in accordance with all local
codes and ordinances.
This product is for use on a nominal
120-volt circuit, and has a grounding
plug that looks like the plug illustrated
in the drawing below.
Power Requirements:
IMPROPER CONNECTION OF
THE EQUIPMENT GROUNDING
CONNECTOR CAN RESULT IN A
RISK OF AN ELECTRIC SHOCK.
CHECK WITH A QUALIFIED
ELECTRICIAN OR SERVICE MAN
IF YOU ARE IN DOUBT AS TO
WHETHER THE PRODUCT IS
PROPERLY GROUNDED. DO NOT
MODIFY THE PLUG PROVIDED
WITH THE PRODUCT, IF IT WILL
NOT FIT THE OUTLET, HAVE A
PROPER OUTLET INSTALLED BY
A QUALIFIED ELECTRICIAN.
This treadmill can be seriously
damaged by sudden voltage
changes in your home’s electrical
power. Voltage spikes, surges and
noise interference can result from
weather conditions or from other
appliances being turned on or off.
To reduce the possibility of treadmill
damage, always use a surge
protector (not included ) with your
treadmill.
Surge protectors can be purchased
at most hardware stores. The
manufacturer recommends a single
outlet surge protector with a UL 1449
rating as a Transient Voltage Surge
Suppressor (TVSS) with a UL
suppressed voltage rating of 400V
or less and an electrical rating
120VAC,15 amps.
This treadmill must be grounded to
reduce the risk of electrical shock.
Grounding provides a path of least
resistance for electric current, should
the treadmill malfunction. This
treadmill comes with an electrical
cord having an equipment-grounding
-3-
SURGE PROTECTOR
GROUNDING PLUG
SURGE PROTECTOR
GROUNDING PIN
GROUNDING OUTLET
TREADMILL POWER CORD
ADAPTOR
SCREW
GROUNDING OUTLET
SURGE PROTECTOR
GROUNDING PLUG
power requirements
POWER REQUIREMENTS
conductor and a grounding plug.
Always plug the power cord into a
surge protector, and plug the surge
protector into an appropriate outlet
that is properly installed and
grounded in accordance with all local
codes and ordinances.
This product is for use on a nominal
120-volt circuit, and has a grounding
plug that looks like the plug illustrated
in the drawing below.
Power Requirements:
IMPROPER CONNECTION OF
THE EQUIPMENT GROUNDING
CONNECTOR CAN RESULT IN A
RISK OF AN ELECTRIC SHOCK.
CHECK WITH A QUALIFIED
ELECTRICIAN OR SERVICE MAN
IF YOU ARE IN DOUBT AS TO
WHETHER THE PRODUCT IS
PROPERLY GROUNDED. DO NOT
MODIFY THE PLUG PROVIDED
WITH THE PRODUCT, IF IT WILL
NOT FIT THE OUTLET, HAVE A
PROPER OUTLET INSTALLED BY
A QUALIFIED ELECTRICIAN.
This treadmill can be seriously
damaged by sudden voltage
changes in your home’s electrical
power. Voltage spikes, surges and
noise interference can result from
weather conditions or from other
appliances being turned on or off.
To reduce the possibility of treadmill
damage, always use a surge
protector (not included ) with your
treadmill.
Surge protectors can be purchased
at most hardware stores. The
manufacturer recommends a single
outlet surge protector with a UL 1449
rating as a Transient Voltage Surge
Suppressor (TVSS) with a UL
suppressed voltage rating of 400V
or less and an electrical rating
120VAC,15 amps.
This treadmill must be grounded to
reduce the risk of electrical shock.
Grounding provides a path of least
resistance for electric current, should
the treadmill malfunction. This
treadmill comes with an electrical
cord having an equipment-grounding
-3-
SURGE PROTECTOR
GROUNDING PLUG
SURGE PROTECTOR
GROUNDING PIN
GROUNDING OUTLET
TREADMILL POWER CORD
ADAPTOR
SCREW
GROUNDING OUTLET
SURGE PROTECTOR
GROUNDING PLUG
power requirements
POWER REQUIREMENTS
conductor and a grounding plug.
Always plug the power cord into a
surge protector, and plug the surge
protector into an appropriate outlet
that is properly installed and
grounded in accordance with all local
codes and ordinances.
This product is for use on a nominal
120-volt circuit, and has a grounding
plug that looks like the plug illustrated
in the drawing below.
Power Requirements:
IMPROPER CONNECTION OF
THE EQUIPMENT GROUNDING
CONNECTOR CAN RESULT IN A
RISK OF AN ELECTRIC SHOCK.
CHECK WITH A QUALIFIED
ELECTRICIAN OR SERVICE MAN
IF YOU ARE IN DOUBT AS TO
WHETHER THE PRODUCT IS
PROPERLY GROUNDED. DO NOT
MODIFY THE PLUG PROVIDED
WITH THE PRODUCT, IF IT WILL
NOT FIT THE OUTLET, HAVE A
PROPER OUTLET INSTALLED BY
A QUALIFIED ELECTRICIAN.
This treadmill can be seriously
damaged by sudden voltage
changes in your home’s electrical
power. Voltage spikes, surges and
noise interference can result from
weather conditions or from other
appliances being turned on or off.
To reduce the possibility of treadmill
damage, always use a surge
protector (not included ) with your
treadmill.
Surge protectors can be purchased
at most hardware stores. The
manufacturer recommends a single
outlet surge protector with a UL 1449
rating as a Transient Voltage Surge
Suppressor (TVSS) with a UL
suppressed voltage rating of 400V
or less and an electrical rating
120VAC,15 amps.
This treadmill must be grounded to
reduce the risk of electrical shock.
Grounding provides a path of least
resistance for electric current, should
the treadmill malfunction. This
treadmill comes with an electrical
cord having an equipment-grounding
-3-
SURGE PROTECTOR
GROUNDING PLUG
SURGE PROTECTOR
GROUNDING PIN
GROUNDING OUTLET
TREADMILL POWER CORD
ADAPTOR
SCREW
GROUNDING OUTLET
SURGE PROTECTOR
GROUNDING PLUG
Before beginning any exercise program, always consult with your physician. If you
experience chest pains, nausea, dizziness or shortness of breath, stop exercising and
consult your physician before continuing.
GROUNDING INSTRUCTIONS
This product must be grounded! If the treadmill should malfunction or breakdown, ground-
ing provides a path of least resistance for electrical current to reduce the risk of electrical
shock. This product is equipped with a cord having an equipment grounding conductor and a
grounding plug. This plug must be inserted an appropriate outlet that is properly installed and
grounded in accordance with local codes and ordinances.
The outlet selected should be a dedicated electrical circuit. It is particularly important that no
sensitive electrical equipment, such as a computer or TV, share the same electrical circuit.
DANGER! Improper connection of the equipment-grounding
conductor can result in a risk of electric shock.
Check with a qualied electrician or serviceman if
you are in doubt as to whether the product is
properly grounded. Do not modify the plug
provided with the product – if it will not t the
outlet, have a proper outlet installed by a qualied
electrician.
To reduce the risk of electrical shock, always
unplug the treadmill from the electrical outlet
immediately after using and before cleaning.
ELECTRICAL SAFETY
To reduce the risk of burns, re, electrical shock, or injury to persons, take the following
precautions:
 When plugged in, do not leave the treadmill unattended at any time.
Unplug the treadmill from the power source when it is not in use, before
adjusting, putting on or taking off parts.
 Use this treadmill only for its intended use as described in this manual.
 Do not use this treadmill if the unit is wet or the plug or cable is
damaged or the treadmill is not working properly.
Do not use damaged or defective equipment.
 Keep the power cable plugged away from heated surfaces.
 Never place the power cord under carpeting or place
any object on top of the power cord.
 Use only the power cord provided with this
treadmill.
 To disconnect the plug, turn the switch
to the off position, then remove the
plug from the outlet.
Safety Guidelines
7

This exercise equipment is designed and built for optimum safety for home use.
However, certain precautions always apply whenever you operate any exercise
equipment.
Be sure to read the entire manual before assembly and operation of this machine.
Also, please note the following safety precautions.
MECHANICAL SAFETY
 Inspect the equipment prior to exercising to ensure that all nuts and bolts are
fully tightened before each use.
 Replace any defective components immediately and/or keep the equipment out
of use until repair.
 Do not use attachments not recommended by the manufacturer.
 Never drop or insert an object into any opening.
 Only one person may use the treadmill at a time.
 Never activate the treadmill when someone is standing on the belt.
APPROPRIATE ATTIRE
 Always wear appropriate clothing.
Do not wear loose clothing that might catch on any part of this treadmill.
 Always wear non-slippery shoes while working with the treadmill.
Do not wear shoes with heels or leather soles.
Check the soles of your shoes and remove any dirt and embedded stones.
CHILDREN AND PETS
 Most exercise equipment is not recommended for small children.
Children should not use the equipment unless they are under strict adult supervision.
To ensure safety, keep young children off the treadmill at all times.
 Exercise equipment has many moving parts.
In the interest of safety, keep others (especially children and pets) at a safe distance
while you exercise.
FCC WARNING - POSSIBLE RADIO/TELEVISION INTERFERENCE
NOTE: This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. Any changes or modications not
expressly approved by the party responsible for the compliance could void the user’s authority to operate the equipment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the
interference will not occur in a particular installation.
If this equipment does cause harmful radio interference to radio or television reception, which can be determined by
turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following
measures:
Class R (Residential): Private or non-commercial use
• Reorient or relocate the receiving antenna
• Increase space between the equipment
• Plug the equipment into two electrical outlet located on separate circuits
• Consult an exercise equipment dealer or an experienced radio/TV technician for help
Safety Guidelines
8

Assembly of the T50 takes professional installers about 1/2 hour to complete. If this is
the rst time you have assembled this type of equipment, plan on signicantly more
time.
Professional installers are highly recommended!
However, if you acquire the appropriate tools, obtain assistance, and follow the
assembly steps sequentially, the process will take time, but is fairly easy.
ASSEMBLY TIPS
Read all “NOTES” on each page before beginning each step.
While you may be able to assemble the T50 using the illustrations only, important safety
notes and other tips are included in the text.
Some pieces may have extra holes that you will not use. Use only those holes indicated in
the instructions and illustrations.
NOTE: To nd out the length of a particular bolt, measure its shank (the long, narrow part
beneath the head).
Refer to the following diagram:
Do not fully tighten bolts until instructed to do so.
NOTE: After assembly, you should check all functions to ensure correct operation. If you
experience problems, rst recheck the assembly instructions to locate any possible errors
made during assembly. If you are unable to correct the problem, call the dealer from whom
you purchased the machine or call 1-800-556-3113 for the dealer nearest you.
Assembly Instructions
9

Be careful to assemble all components
in the sequence they are presented.
Note: Do not fully tighten bolts until the unit is completely assembled.
A. Position all the components from the box onto a clean area.
NOTE: The following tools have been included to ease treadmill setup.
Allen Wrench M6 x 70
Allen Wrench M5 x 70
Open Ended Wrench M13/M17
B. Slide Handle Bar (K) into Lower Handle Bar (J) and secure using:
Two 59 (M5x10 phillips head bolt)
Two 67 (M5.5 arc washer)
C. Repeat Part B by installing the remaining Handle Bar (K) and Lower Handle Bar (J).
Step 1
10

Above shows STEP 1 assembled and completed.
Step 1
11

Be careful to assemble all components
in the sequence they are presented.
Note: Do not fully tighten bolts until the unit is completely assembled.
A. Connect Cable A1 (88) to Cable A2 (89).
B. Secure Right Upright Post (F) to Main Frame (A) by using:
Two 48 (M10x25 round allen head bolt)
 Four65(M10.5atwasher)
Two 70 (M10 nut)
NOTE: Pay attention to not pinch Cable A1 (88) or Cable A2 (89) when securing
Right Upright Post (F) to Mainframe (A).
Assistance may be required.
C. Slide Vertical Bar (H) into Right Upright Post (F) as shown in the diagram using:
One 51 (M8x15 round allen head bolt)
 One66(M8.5atwasher)
D. Secure Left Upright Post (G) to Main Frame (A) by using:
Two 48 (M10x25 round allen head bolt)
 Four65(M10.5atwasher)
Two 70 (M10 nut)
E. Attach Vertical Bar (H) to Left Upright Post (G) using:
One 112 (M8x45 round allen head bolt)
 One66(M8.5atwasher)
Step 2
12

Above shows STEP 2 assembled and completed.
Step 2
13

Be careful to assemble all components
in the sequence they are presented.
Note: Do not fully tighten bolts until the unit is completely assembled.
A. Slide Handle Bar (K) into Right Upright Post (F) and secure using:
Two 59 (M5x10 phillips head bolt)
Two 67 (M5.5 arc washer)
B. Slide the remaining Handle Bar (K) into Left Upright Post (G) and secure
using:
Two 59 (M5x10 phillips head bolt)
Two 67 (M5.5 arc washer)
C. Attach both Lower Handle Bars (J) to Main Frame (A) using:
Four 48 (M10x25 round allen head bolt)
 Six65(M10.5atwasher)
Two 70 (M10 nut)
Step 3
14

Above shows STEP 3 assembled and completed.
Step 3
15

Be careful to assemble all components
in the sequence they are presented.
Note: Do not fully tighten bolts until the unit is completely assembled.
A. Bring Console (93) near Right Upright Post (F) and Left Upright Post (G) for
installation.
B. Connect Cable B1 to Cable B2 (88).
Connect Cable C1 to Cable C2 (98).
Connect Cable D1 to Cable D2 (98).
NOTE: Pay attention to not pinch Cable B1, Cable B2 (88), Cable C1,
Cable C2 (98), Cable D1, Cable D2 (98) when securing Right
Upright Post (F) to Mainframe (A).
Assistance may be required.
C. Completely insert Console (93) onto Left Upright Post (G) and Right Upright
Post (F). Secure Console (93) by using:
Four 54 (M8x10 allen head bolt)
D. Attach Safety Key (12) onto Console (93).
NOTE: If you experience slippage of the treadmill belt while walking/running on
the treadmill, please stop using the treadmill immediately and follow the
instruction of how to adjust the belt tension on Page 28 & 29.
Step 4
16

12
Above shows STEP 4 assembled and completed.
Step 4
17

Be careful to assemble all components
in the sequence they are presented.
Note: Do not fully tighten bolts until the unit is completely assembled.
A. Attach Ramp (D) to Ramp Support Bracket (E) and secure using:
Four 55 (M8x30 round allen head bolt)
 Four66(M8.5atwasher)
Four 71 (M8 nut)
B. Slightly lift Main Frame (A) and slide the ramp assembly under the treadmill.
Position Ramp (D) so that locations H1 and H2 are properly aligned with
Ramp (D).
NOTE: The wheelchair accessible ramp is does not need to be installed for
general purpose operation.
C. Now completely tighten all assembled hardware from Step 1 - Step 5.
D. Congratulations! Your new treadmill is completely installed.
NOTE: If you experience slippage of the treadmill belt while walking/running on
the treadmill, please stop using the treadmill immediately and follow the
instruction of how to adjust the belt tension on Page 28 & 29.
WHEELCHAIR ACCESS
A wheelchair non-slip access ramp has been provided with the treadmill. Users
with limited mobility may approach the access ramp with or without a wheelchair.
If using a wheelchair, secure the wheelchair using the wheel brakes. Remove the
wheelchair foot rests. Use the handrails for support and slowly lift onto the access
ramp.
Start with 0.1 mph workouts and slowly increase the treadmill speed as you
become more familiar with the treadmill and the physical endurance is appropriate.
Remember, before beginning any tness program, you should obtain a complete
physical examination and workout instructions from your physician.
Step 5
18

Above shows STEP 5 assembled and completed.
Step 5
19

PLACEMENT IN YOUR HOME
To make exercise a desirable daily activity for you, the treadmill should be placed in a
comfortable and attractive setting. This treadmill is designed to use minimal oor space and
to t nicely in your home.
 Do not place or operate the treadmill outdoors.
 Do not place the treadmill near water or in a high moisture content environment.
 Make sure the power cord is not in the path of heavy trafc.
 It is highly recommended to place a dedicated treadmill mat beneath your treadmill.
A dedicated mat provides superior stability and rmness for a proper workout.
 Locate the treadmill at least 4 feet from walls or furniture.
 Allow a safety area of 79” x 39” (2000mm x 1000mm) behind the treadmill
so that you can easily get on and off the treadmill and adjust the tension of the belt.
Occasionally, after extended use, you will nd a ne black dust below your treadmill. This
is normal wear and DOES NOT mean there is anything wrong with your treadmill. This dust
can be easily removed with a vacuum cleaner. If you wish to prevent this dust from getting
on your oor or carpet, place a dedicated treadmill mat beneath your treadmill.
LEVELING THE BASE
It is important that you place the treadmill on a rm level surface. If the ground is uneven, you
may level the treadmill with levelers located under the deck. Make sure the back of the deck
is not higher than the front. If adjustments are to be made, check to see if the leverage feet,
as shown below, touch the ground rmly. If there is a gap, turn the leverage foot
counterclockwise to eliminate the gap.
Make sure the running deck is level to the ground. If the deck is positioned so that you are
running downhill, it will cause premature damage to the electronic system
Adjustable Levellers
Setting up your Treadmill
20