Insportline inCondiT30i User manual

USER MANUAL –EN
IN 21318 Treadmill inSPORTline inCondiT30i

2
CONTENTS
SAFETY INSTRUCTIONS....................................................................................................................... 3
ASSEMBLY ............................................................................................................................................. 4
TRANSPORTATION ............................................................................................................................. 11
CONSOLE............................................................................................................................................. 12
MAINTENANCE GUIDE........................................................................................................................ 14
ADJUSTING THE RUNNING BELT................................................................................................... 14
LUBRICATING THE TREADMILL ..................................................................................................... 15
TROUBLESHOOTING .......................................................................................................................... 16
DIAGRAM.............................................................................................................................................. 18
PARTS LIST.......................................................................................................................................... 20
ENVIRONMENT PROTECTION ........................................................................................................... 21
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS................................................. 21

3
SAFETY INSTRUCTIONS
•Read the manual carefully and keep it for future reference.
•Always clip the safety key to your clothes or belt before starting exercising.
•Move naturally, forward. Do not look on your feet. Only for one person can use the product on
the same time.
•Speed increase gradually, not instantly.
•In case of danger, press the stop button or pull out the safety key.
•Leave the device after it stopes moving.
•Follow the assembly instructions. Assembly can be done by adult person.
•Keep away from kids and pets. Do not leave kids and pets unattended near the treadmill.
Treadmill is for adults only.
•Before starting any exercise, program ask your physician. It is important if you have heath
issues or ongoing treatment or have high blood pressure.
•Regularly check all bolts and nuts. They must be tightened properly. Regularly check the
treadmill for damage or signs of wear. Do not use damaged or wear treadmill.
•Regularly check the treadmill for signs of wear or damage. If any sharp edge appears stop
using the treadmill.
•Please the treadmill on flat, dry and cleat surface. Keep safety distance of at least 0.6 m
around the treadmill. Do not use in humid areas. Do not place the treadmill on thick carpet.
•If the power cable is damaged do not use the device. Buy new one in authorized shop.
•Protect the treadmill from humidity and water.
•Place the treadmill not to cover socket.
•Do not use aerosol sprays in the area around treadmill.
•If the treadmill is running, do not remove the protective cover. If you need to remove the
protective cover during maintenance, unplug the treadmill from socket.
•Always wear sport clothes. Do not wear loose clothes that can get stuck. Always wear sport
boots.
•Do not turn on the treadmill if you are standing on it. There is a delay when you turn on the
treadmill. Before starting the treadmill stand on the side.
•Do not exercise 40 min after eating food.
•Always do warm ups before exercise.
•Do not place foreign object to ventilation or sockets.
•Maintenance should be done only according to the manual, to prolong the lifespan.
•Do not modify the product.
•Exercise reasonably and do not overextend. If you exercise for the first time, hold your
handles firmly until you get used to the device.
•In case of error or damage stop the exercising immediately. If the treadmill suddenly increases
its speed, remove the safety key.
•Connect the treadmill to socket after the treadmill is assembled. Use only grounded socket.
•If you are not using the device unplug it from socket and safety key removed.
•Any part of the treadmill cannot prohibit the movement of the user.
•Do not use outdoors.

4
•Do not expose to direct sunlight.
•Do not place in areas with high humidity (pools, sauna etc.)
•Continuous use cannot be longer than 2 hours.
•If the treadmill is not in use, remove the safety key.
•Operation temperature: 5 –40 °C
•Max. user weight: 120 kg
•Category: HC (according to EN 957) suitable for home use.
SAFETY WARNING: Do not use heart rate sensors in the handle at speeds above 14 km / h.
WARNING! The heart rate monitoring system may not be accurate. Overextending during
training can cause serious injury or death. If you feel nauseous, stop the exercise
immediately!
ASSEMBLY
The package includes:
No.
Name
Spec.
Picture
Qty.
A
Treadmill
1
B
Console
1
C14
Safety key
1
E08
Power cable
1
B08
Wrench /w screwdriver
S=13, 14, 15
1
B09
Allen key
S5
1
D05
Allen bolts
M8x45
4
D09
Allen bolts
M8x15
4
D24
Washer
Ø8
2
D29
Washer
Ø8
2

5
STEP 1
Carefully pull out the belt (A) and console (B) out of the box.

6
STEP 2
Attach the posts (A04 and A05) to the treadmill (A) with 2x bolts (D05) on each side.
Attach the handrails (A03) to the posts (A04 and A05) with 2x washers (D29) and 2x bolts (D09).

7
STEP 3
Connect the console cables to the cables from the console bracket as shown.
Then attach the console (2) to the console bracket (A03) with 2x washers (D24) and 2x bolts (D09).

8
STEP 4
Cut the tape.

9
STEP 5
Lift the belt and attach the feet (f) to the belt with the screws (b), then attach the feet (f) to the bottom
frame with the screws (b).

10
KROK 6
The treadmill is ready for use, attach the safety key for use and check function.

11
TRANSPORTATION
Lift the treadmill by the rear part (K) and secure with the bracket (F). Then tip and move the treadmill
using the transport wheels.
If the belt is heavy, ask another person for help.

12
CONSOLE
Button function:
1. INSTANT INCLINE: Press 3, 6, 9 to quickly change incline.
2. INSTANT SPEED: Press 3, 6, 9 to quickly change speed.
3. INCLINE +: Press to increase incilne.
4. INCLINE -: Press to decrease incline.
5. START: Press to turn on the treadmill.
6. MODE: Press the button to displey TIME, DISTANCE, CALORIES WORKOUT TARGETS, 15
programs, 3 user programs and BODY FAT.
7. STOP/PAUSE: Press to stop / pause the treadmill.
8. SPEED -: Press to reduce speed.
9. SPEED +: Press to increase speed.
Media (optional):
1. MP3: Use 3 mm cable to connect.
2. USB: You can use USB port to charge your device.
Console function:
1. Calories: Display burned calories.
2. Distance: Display distance.
3. Incline: Display incline.

13
4. Time: Display time use.
5. Speed: Displays current speed. You can adjust the speed by the buttons.
6. Pulse: Displays the current heart rate. Grasp the sensors on the handles. The sensors start
detecting the pulse after 5 seconds. Displayed values are for reference only and are not for
medical or healing purposes.
7. Mode: Press the MODE button to change the value of TIME, DISTANCE, CALORIES, 15
programs, 3 user programs and BODY FAT
7.1. Set time, distance and calories: Press the MODE button in the STANDBY MODE, values of
time, distance and calorie values lights up.
7.2.Press SPEED +/- or INCLINE +/- buttons to set the speed and incline values.
Press the START button to start the treadmill in 3 seconds.
Press SPEED +/- to adjust the speed.
Press INCLINE +/- to adjust the incline.
7.3. 5 preset programs: Press MODE repeatedly in STANDBY MODE to display the 15 preset
programs.
Use the SPEED +/- and INCLINE +/- buttons to set the training value.
Each program is divided into 10 parts, the console will sound a sound when entering a new
segment.
Use the SPEED +/- and INCILNE +/- buttons to adjust the speed and incline of each
segment.
The console sounds 6 beeps when the program is completed.
7.4. 3 user programs: Press MODE repeatedly in STANDBY MODE to display 3 user programs.
Use the SPEED +/- and INCLINE +/- buttons to set the training value.
Each program is divided into 10 parts, the console will sound a sound when entering a new
segment.
Use the SPEED +/- and INCILNE +/- buttons to adjust the speed and incline of each segment.
The console sounds 6 beeps when the program is completed.
7.5. To start the body fat test: Press MODE repeatedly, in STANDBY MODE, FAT is displayed.
Press MODE to enter.
Use the SPEED +/- buttons to set the values. F-1 to F-4 values (F-1 - GENDER, F-2 - AGE,
F-3 HEIGHT, F-4 WEIGHT)
Then use the MODE button to enter F-5 (BODY FAT TEST), grasp the sensors on the
handles and the console will display the values after 3 seconds.
Values are for guidance only and are not for medical or healing purposes.
F-1
GENDER
01 MALE
02 FEMALE
F-2
AGE
10 –99
F-3
HEIGHT
100 –200 cm
F-4
WEIGHT
20 –150 kg
F-5
RESULT
≤19
Underweight
RESULT
20-25
Normal weight
RESULT
26-29
Overweight
RESULT
≥30
Obesity

14
LUBRICATION NOTIFICATION
The treadmill automatically alerts the user. A warning is displayed after 300 km. The console will
sound a beep every 10 seconds and the OIL will be displayed. Read the user manual before
lubricating and then apply the lubricant to the center of the treadmill. After lubrication, press the STOP
button for 3 seconds to turn off the alarm and notification.
SAFETY KEY
If the safety key is removed during exercising, the treadmill will stop. The display shows --- together
with the beep. The treadmill will not work until the key is inserted again.
SAVING MODE
The belt is equipped with a power saving mode that starts after 10 minutes when the treadmill is not in
use. Console shuts down, press any button to wake up console,
TURNIN ON / OFF THE TREADMILL
Press the button to turn on / off the treadmill and .
WARNING
•We recommend that you start exercising at a slower speed. Hold on to the handrails until you
are confident to start exercising on higher speeds.
•Connect the safety key to the console and then to your clothes. In case of malfunction or
problems, pull out the key.
•To stop safely, press the STOP button or remove the safety key.
MAINTENANCE GUIDE
General cleaning will help to prolong the life and improve performance on your treadmill. Keep the unit
clean and maintained by dusting the components on a regular basis, cleaning the two exposed sides
of the running belt to prevent dust from accumulating underneath the belt. Keep your running shoes
clean so that dirt from the shoes does not wear the running belt. Clean the surface of the running belt
using a clean damp cloth. Keep liquids away from electrical parts and running belt.
To prolong the lifespan of the treadmill it is recommended to turn it off every 2 hours of continues use
for at least 10 minutes.
A loose running belt will result in the runner sliding off when running, while too tight running belt will
result in decrease of the motors performance and will also create more friction between the roller and
running belt. The most suitable tightness for the belt is distance of 50-75mm from the running board.
ADJUSTING THE RUNNING BELT
Place the treadmill on level ground and set it at 3.5 –5 km/h to check and see if the running belt (20)
drifts from the center.
If the running belt (20) drifts to the right, turn the
adjusting bolt on the right side ¼turn clockwise,
then turn the left adjustment bolt ¼ turn counter-
clockwise. If the belt does not move, repeat this
step until it centers. Refer to image A.

15
If the running belt (20) drifts to the left, turn the
adjusting bolt on the left side ¼of a turn
clockwise, then turn the right adjustment bolt ¼
turn counter-clockwise. If the belt does not move,
repeat this step until it centers. Refer to image B.
Over time, the running belt (20) will loosen. To
tighten the belt, turn both the left & right-side
adjustment bolts one full turn clockwise. Check
the tension of the belt. Continue this process until
belt is at the correct tension. Make sure to adjust
both sides equally to ensure even belt alignment.
Refer to image C.
LUBRICATING THE TREADMILL
Lubricating the running belt & the running board is essential as the friction affects the life span and
operations of the treadmill. Therefore, we suggest you to inspect the running belt regularly.
WARNING: Always unplug the treadmill from the electrical outlet before cleaning, lubricating, or
repairing the unit.
The following time table is recommended:
Light user (less than 3 hours/week)
Every 6 months
Medium user (3 - 5 hours/week)
Every 3 months
Heavy user (more than 5 hours/week)
Every 2 months
How to lubricate the treadmill:
Lift up the belt on one side and apply a lubricant, then apply lubricate to entire surface with a cloth.
repeat on the other side.
All moving parts must move freely and quietly. Abnormal movement may impair product safety. Check
and tighten all screws regularly.
Proper and regular maintenance extends the lifespan of the treadmill.

16
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
Treadmill will not start
Not plugged in.
Plug the cord into the outlet.
Safety key not inserted.
Insert safety key.
Running belt not centered
Running belt tension not proper
on the left or right side of the
running board.
Tighten the adjustment bolts on
the left and right side of the rear
roller.
Computer not working
Wires from the computer and
bottom control board not
properly connected.
Check wire connections from the
computer to the control board.
Transformer is damaged.
If the transformer has become
damaged, contact customer
service.
E01 & E13: Communication
failure
No communication from console
to control board.
Check wire connections from the
computer to the control board
and replace wires and/or control
board if necessary.
E02: Burst clash protection
Incoming voltage is lower than
50% of the required voltage.
Check the incoming voltage
against the required voltage.
Check wire connections to the
motor. Check the control board,
replace if necessary.
E05: Current overload
protection (Self Protecting
System))
The incoming voltage is too low
or too high. The control board is
damaged.
Restart the treadmill. Check if
the incoming voltage is correct.
Check the control board, replace
if damaged.

17
A moving part of the treadmill is
stuck and therefore the motor is
unable to rotate properly.
Inspect the moving parts of the
treadmill to ensure that they are
operating correctly. Check the
motor, listen for strange noises
and check for a burning smell.
Replace the motor if necessary.
E06: Motor error
The motor wire is not connected
or the motor is damaged.
Check motor wires to see if the
motor is connected. If the wire
has been punctured or
damaged, you will need to
replace it. If the problem is not
solved, you may need to replace
the motor
E08: Control Board Abnormality
The control board is not
connected.
Check the upper and middle
wires to see if the control board
is connected. If the wire has
been punctured or damaged,
you will need to replace it. If the
problem is not rectified, you may
need to replace the control
board.
E10: Motor abnormality
The motor is damaged or a
moving part of the treadmill is
stuck and therefore the motor is
unable to rotate properly.
The torque is too big, please
adjust the torque. Check moving
parts of the treadmill to ensure
that they are operating correctly.
Replace the motor if necessary.
Lubricate the treadmill.

18
DIAGRAM

19

20
PARTS LIST
No.
Name
Spec.
Qty.
No.
Name
Spec.
Qty.
A01
Base frame
1
C21
Ring-shape wire plug
2
A02
Main frame
1
C22
EVA cushion
1
A03
Console bracket
1
C23
EVA cushion
2
A04
Left upright tube
1
C24
Console wire cover
1
A05
Right upright tube
1
D01
Nut
M6
6
A06
Incline bracket
1
D02
Nut
M8
8
A07
Console fixed bracket
1
D03
Nut
M10
6
B01
Front roller
1
D04
Bolt
M10*55 L20
4
B02
Back roller
1
D05
Bolt
M8*55
4
B03
Safety key shrapnel
2
D06
Bolt
M8*40 L20
4
B04
Left pulse steel plate
2
D07
Bolt
M8*30 L15
1
B05
Right pulse steel plate
2
D08
Bolt
M8*25
2
B06
Cylinder
1
D09
Bolt
M8*15
6
B07
Incline bracket bushing
8
D10
Bolt
M10*45 L15
1
B08
Wrench w/screw driver
S=13, 14, 15
1
D11
Bolt
M6*65
2
B09
5# Allen wrench
5 mm
1
D12
Bolt
M6*55
1
C01
Motor top cover
1
D13
Bolt
M6*35
6
C02
Motor bottom cover
1
D14
Bolt
M5*16
4
C03
Left back end cover
1
D15
Bolt
M5*12
7
C04
Right back end cover
1
D16
Bolt
M5*10
2
C05
Decorative cushion
2
D17
Screw
ST4.2*45
4
C06
Side rail
2
D18
Screw
ST4.2*20
8
C07
Console top cover
1
D19
Screw
ST4.2*12
18
C08
Console bottom cover
1
D20
Screw
ST4.2*12
20
C09
Panel top cover
1
D21
Bolt
M10*95 L25
1
C10
Pane bottom cover
1
D22
Screw
ST2.9*8
20
C11
Handle cover
2
D23
Screw
ST2.9*6
4
C12
Running belt
1
D24
Lock washer
8
8
C13
Motor belt
1
D25
Lock washer
10
6
C14
Safety key
1
D26
Flat washer
8
6
C15
Blue cushion
6
D27
Bolt
M8*55 L20
2
C16
Transport wheel
2
D28
Spring washer
8
2
C17
Square plug
2
D29
Arc-gasket
8
2
C18
Adjustable wheel
2
D30
Lock washer
6
3
C19
Foot pad
4
D31
Bolt
M8*15
2
C20
Washer
2
D32
Bolt
M5*15
2