Eneo MAM-5DC1004M0A User manual

EN
Quick Installation Guide
Distributor, 1x BNC Input, HD-TVI,
CVI, AHD, CVBS, 4x BNC Output
MAM-5DC1004M0A

Coaxial Cabling : HD-TVI/AHD/HDCVI/CVBS Video Distributor
ITEM NO.: MAM-5DC1004M0A HD-TVI/AHD/HDCVI
1 input 4 output Video Distributor
MAM-5DC1004M0A is 1 input 4 output HD-TVI/AHD/HDCVI Video distributor. They are
suitable for far distance, different floor in a building or different electrical field.
MAM-5DC1004M0A
Features:
1 Video input to 4 video output.
Support HD-TVI, AHD, HDCVI, 960H, NTSC, PAL video signal.
Support high resolution up to 4K/1080P without any video loss.
Channel 4 support one output support HD video + data control mode (Up the coax).
Built in TVS protection.
Installation View:
Slide switch at video:
Slide switch at VIDEO+DATA:
HD Camera
HD Camera
Data Control
Video output Control

Dip Switch Mode Function：
VIDEO Output 4 support video only.
VIDEO + DATA Output 4 support HD camera video with data control signal
Panel View:
Cable & Transmission Distance：
Link cable recommend use high quality 75ohm coaxial RG59/RG6U cable. The
transmission distance will be affected by different quality of Camera, DVR and BNC
connector, cable, installation…etc.
LED Indication:
GREEN
ON Power ON
OFF Power OFF
Caution：
1. Output 4 under Video+Data mode, the output must connect with HD-DVR. Not allow
to connect with CVBS Camera/DVR.
Specifications:
ITEM NO.
MAM-5DC1004M0A
Video Input Channel
BNC x 1, 75Ω, 1Vpp
Video Output Channel
BNC x 4 75Ω, 1Vpp
Video Bandwidth
100MHz 0.1dB Gain Flatness
Power Supply
DC12V 500mA
Power Consumption
110mA (Max)
Temperature
Operation: 0 to 55℃, Storage: -20 to 85℃, Humidity: up to 95%
Dimensions mm
138 x 85.6 x 29.5
Weight g
140

eneo® is a registered trademark of
VIDEOR E. Hartig GmbH
Exclusive distribution through special-
ised trade channels only.
VIDEOR E. Hartig GmbH
Carl-Zeiss-Straße 8
63322 Rödermark/Germany
Tel. [phone] / 888-0
Fax [phone] / 888-100
www.videor.com
www.eneo-security.com
Technical changes reserved
© Copyright by VIDEOR E. Hartig
GmbH Version 11/2019