Energie MINIMUS SURFACE User manual

MINIMUS SURFACE
Energie LLC, 15000 W. 6th Ave., Ste 202A Golden, CO 80401 Tel [phone] Fax [phone] www.energielighting.com
All rights reserved. These products may be covered by one or more U.S. or international patents or patents pending. 9/02
Installation Instructions
Install Energie junction box into wall. Unsnap cover from back of light. Remove nuts to detach backplate from
coverplate.
Anchor coverplate to j-box at one end and
screw to wall at other end.
Anchor mounting plate to coverplate at
both ends by reattaching with provided
nuts.
Make electrical connection and push con-
nection through coverplate and mounting
plate into junction box.
Snap fixture onto mounting plate. Remove lens or baffle by pulling out and
off.
Slide lampholder cover inside of lamphold-
er.
23
456
789
1
1
Product to be installed by qualified electrician only. PART # 05090205-01

MINIMUS SURFACE
Energie LLC, 15000 W. 6th Ave., Ste 202A Golden, CO 80401 Tel [phone] Fax [phone] www.energielighting.com
All rights reserved. These products may be covered by one or more U.S. or international patents or patents pending. 9/02
Installation Instructions
Snap lampholder cover off of lamp hous-
ing.
Install lamp per relamp label. Reverse
steps to reassemble.
Adjust housing to desired position
(adjustable version only).
11 12
13 14 15
16 17 18
10
2
Product to be installed by qualified electrician only. PART # 05090205-01