ENERGY SISTEM Clock Radio 200 Time Ray User manual

ENGLISH
User manual

17
ENGLISH
1. INTRODUCTION
Thank you for purchasing this
Energy™ Clock Radio 200 Time Ray , we
hope you will enjoy it.
Welcome to the Energy(tm) Clock Radio world.
The following sections provide an overview of your new device and its
basics features. Please read everything carefully before start using the
product.
2. IMPORTANT SAFETY INSTRUCTIONS.
To ensure your safety and the safety of others, please ensure that you
read all the safety information before operating this product.
Keep this information in a safe place for future reference.

18
2.1. SAFETY CONSIDERATIONS.
≥Do not disassemble the device. Any repair work must be performed by
qualified Energy Sistem Soyntec's technical personnel.
≥Do not use the Clock Radio in humid or damp conditions.
≥Do not allow your Clock Radio to get wet.
≥Keep the product away from direct sunlight and heat source such as
radiators or stoves.
≥Do not place naked flame sources, such as candles, on the top of
≥the Clock Radio.
≥Avoid any drop or hit on the Clock Radio.
≥Switch off during thunderstorms.
≥In case of long inactivity periods we recommend to Switch off the Clock
Radio.
3. SERVICING.
There are no user serviceable parts in this Clock Radio.
4. BATTERY DISPOSAL
≥Please ensure batteries are disposed of safely.
≥Never dispose of batteries in a fire or with other household waste.
≥Check with your local authority for disposal regulations.

19
ENGLISH
5. PRODUCT CONTENT
≥Clock radio Energy™ Clock Radio 200
≥User manual.
≥AC/DC adapter.
6. POWER SUPPLY
Your
Energy™ Clock Radio 200 is power on when the 6V AC/DC adapter
(included) is connected to the wall power connection and plug to the
clock radio.
Caution
≥To take off the wall power connector you have to remove always from
the adapter and never from the cable.


20
7. PRODUCT OVERVIEW
1. Time setting (Clock Set).
2. Alarm time setting (Alarm Set).
3. Sleep mode (Sleep).
4. Snooze mode (Snooze).
5. Degree C/F temperature (HOUR).
6. Minutes setting (MIN).
7. Hi - Low Dimmer (DIM).
8. Date setting (MODE).
9. Alarm Switch off (ALARM: /SLEEP/OFF).
10. Tuner (Tuning).
11. Alarm selector (AL1 / AL1+2 / AL3).
12. Volume adjust (Volumen).
13. Sound functions.
14. Projector (ON/OFF).
15. Adjust Focus (FOCUS).

21
ENGLISH
FOCUS
ON/OFF
1
2
9
3
6
5
7
815
14
VOLUME
ON
STB
AUTO
BUZZ
AL 1
AL 1+2
AL 3
TUNING
13 11
4
10
12

22
8. BATTERIES INSTALLATION
Remove the cover of the battery compartment and introduce the 6V
battery.
Don't let the batteries from the reach of children.
Don't try to activate the batteries by heat, recharge or any other way.
Don't drop the batteries to the fire, disassemble or try to do a short
circuit.

23
ENGLISH
9. FUNCTION INSTRUCTIONS
9.1. TIME AND DATE
When you power on the Clock Radio, it begins with:
YEAR: 2009 /DATE: 1 / MONTH: 1/ WEEK: Thursday
And the time on 12:00AM (00:00)
The time indication keeps flashing until you set the correct time.
9.2. SETTING THE TIME
≥Keep the CLOCK SET button pressed and press HOUR to set the hour.
≥Keep the CLOCK SET button pressed and press MIN to set the minutes.
9.3. SETTING THE CALENDAR
≥Press the MODE button; you can watch the "YEAR" place blinks, in that
moment you have to use the HOUR and MIN to adjust the correct year.
≥Press the MODE button again; you can watch the MONTH place blinks
in that moment you have to use the HOUR and MIN to adjust the correct
month.
≥Press the MODE button one more time; you can watch the DATE place
blinking, in that moment you have to use the HOUR and MIN to adjust
the correct day.
≥Press MODE button to confirm.
≥Finally press MODE to finish the setting.

24
9.4. ALARMS
Setting the alarms:
≥Move the selector to the AL 1 position to set the fist alarm.
≥Keep pressed the AL SET button, at the same time press the HOU button
to change the hour, keep pressing until you reach the correct hour.
≥Keep pressed the AL SET button, at the same time press the MIN button
to change the minutes, keep pressing until you reach the correct
minute..
≥To set the AL1+2 and AL3 you have to follow the same steps as before.
9.5. ACTIVATING THE ALARMS
To activate the alarm:
≥Move the selector to the BUZZER position if you want the"BUZZER" as
alarm sound or on AUTO position if you want the "FM radio".
≥If you use the "BUZZER" the alarm keeps ringing 5 minutes, but on the
"FM radio" still from one hour.
≥*The alarms 1 and 2 will work everyday but the alarm 3 works only from
Monday to Friday.
9.6. SNOOZE
When the alarm is turning on, if you press the SNOOZE the sound turns
off automatically come on again after about 9 minutes.
Press AL/SL/OFF to turn off the alarm.