Enfora G2228 Mini-MT User manual

1
Personal Tracking Device
User Guide
The Enfora G2228 Mini-MT is a personal tracking device and lone worker unit that
combines ease of use with a comprehensive feature set in a compact rugged unit.
Enfora Mini-MT
The Enfora Mini-MT pictured above has the following features
•Geo-Fence (button with circle and dot in middle
•User-Defined (button with outward pointing chevron)
•peaker (grill in the middle top of unit)
•LED’s (showing status of battery, gps, call and power on/off)
•Microphone
•Push To Call (initialises call from predefined and programmed number)
•Volume Down
•Volume Up
Plant i Telematics Ltd. www.plant-i.net. [e-mail]. Tel: [phone]

2
Button Description and Usage
Geo-Fence Button
The switch is used to initiate a geo-fence with a default radius of one-half mile..
To use the Geo-Fence press the button on the unit and a Geo-Fence with a radius
of one-half mile will be set.
When the Mini-MT exits the geo-fence an alert message will be sent via M
message to the M Destination Address defined on the unit. If a GP signal is
not available an error tone will be generated to alert the user that no geo-fence
was set.
User Defined Button
The User-Defined button is a programmable button that can be defined for
various functions. This button could be programmed to generate a call to a
number different from the PTC button, generate a geo-fence with different
parameters than the geo-fence button, send an M of the current location to a
cell phone, send the current location to the server, etc.
The unit as programmed by Matrix Telematics Ltd. Has this button defined to
send a M message with the current GP Co-Ordinates of the user. If you wish
this to be configured for a different function please let us know in advance.
Push to Call
The Push To Call (PTC) switch allows the user to place a call to a number that
has been programmed, for example the Office. The number is dialled as soon as
this button is pushed.
Plant i Telematics Ltd. www.plant-i.net. [e-mail] Tel: [phone]

3
Volume Buttons
The Mini-MT has two volume buttons for controlling the audio volume level.
These buttons are functional whether in a call or not. The ‘+’ button is used for
increasing volume and the ‘–’ button is used for decreasing volume.
USB Connection
The U B connector is used for charging the battery and for data communication.
The unit will charge from a laptop computer, AC to U B power adapter, or
vehicle power to U B adapter.
Data communications with the Mini-MT is also performed through the U B
connector. The U B connection is used to configure or customize the Mini-MT
operation.
Headphone Jack
The headphone jack provides the user with the ability to connect a headset (not
supplied) when the speakerphone mode is not desirable.
Speaker
An integrated speaker allows the user to make a phone call to the pre-configured
dispatch number when in hands-free mode. The user can adjust the volume to a
comfortable level using the volume up (‘+’) or down (‘-’) buttons.
Microphone
A built-in sensitive microphone allows the user to communicate with the
dispatcher comfortably at up to 3 feet away for hands-free operation.
Plant i Telematics Ltd. www.plant-i.net. [e-mail] Tel: [phone]