ENFORCER VC-3YAQ User manual

®
VC-3YAQ
4-in-1 HD to HDMI Converter
Manual
Features:
Converts HD-TVI, HD-CVI, HD-AHD, or
Analog/CVBS video to HDMI, VGA, CVBS,
or loop output
Secondary BNC connection supports CVBS
conversion, loop output, or dual HD Analog
video input
Dual HD Analog video input mode to switch
between multiple video inputs
Wall mountable with included screws
Picture-in-picture mode when dual HD Analog
video input used
HDMI/VGA output support: 480p, 576p, 720p,
1080i, 1080p
CVBS output support: NTSC, PAL
CVBS underscan adjustment
Compact, perfect for plug and play installations
Quick installation, no driver or operating system
requirements

ENFORCER 4-in-1 HD to HDMI Converter
2SECO-LARM U.S.A., Inc.
The SECO-LARM 4-in-1 HD to HDMI Converter is the ideal way to transform HD-TVI, HD-CVI, HD-
A
HD, or
traditional analog video inputs into an HDMI, VGA, or CVBS signal. The converter also allows for HD Analog
video loop output, HD Analog dual video input, and picture-in-picture modes. The HD to HDMI Converter is
compact and can be mounted nearly anywhere. The HD to HDMI Converter is perfect for converting any HD
Analog video source to an HDMI, VGA, or CVBS signal to allow viewing on a wide range of video monitors.
1x Converter 1x 12VDC power adapter 1x Manual
4x Wall mount screws 4x Wall mount screw anchors
Input signal HD-TVI, HD-CVI, HD-AHD, NTSC, PAL
Output signal HDMI, VGA, CVBS, loop output
Input resolutions supported 720p@25/30/50/60 Hz, 1080p@25/30 Hz, NTSC, PAL
Output resolutions
supported
HDMI/VGA 480p, 576p, 720p@50/60 Hz, 1080i@50/60 Hz, 1080p@50/60 Hz
CVBS NTSC/PAL
Output connector
HDMI Type A 19-pin female
VGA D-SUB 15-pin female
BNC 75Ω1Vp-p
Input connector BNC (75Ω1Vp-p)
Maximum input cable length HD-TVI, HD-CVI, HD-AHD: 984ft (300m); CVBS: 328ft (100m)
Maximum output cable length HDMI: 16ft (5m); VGA: 16ft (5m); CVBS: 328ft (100m)
Power supply 500mA@12VDC
Power consumption 350mA (max.)
Operating humidity Up to 95%
Operating temperature 32°~131° F (°0~55° C)
Dimensions 51/8"x37/16"x13/16" (130x88x30 mm)
Weight 9.7-oz (275g)
Specifications:
Parts List:
Introduction:
LEDs:
The VC-3YAQ has six LEDs that indicate input and output status.
HDMI Output Side VGA Output Side
P Green Power input present L Green Loop output mode
S Blue Signal (Main Input) S Blue Signal (Secondary Input)
H Red HDMI output present C Red CVBS output mode
Overview:
12VDC Inpu
t
Mounting holes
51/8"
(
130mm
)
37/16"
(88mm)
DIP Switches
Function buttons
HDMI Output
Status LEDs CVBS Input (Main)
Status LEDs
VGA Output
CVBS Input
(Secondary)/Output
13/16"
(
30mm
)

ENFORCER 4-in-1 HD to HDMI Converter
SECO-LARM U.S.A., Inc. 3
DIP Switch Settings and Button Functions:
Output
Mode
DIP
1
DIP
2
DIP
3
DIP
4
Function Buttons
Left Right Left + Right +
Loop output OFF OFF OFF OFF Decrease output
resolution
Increase output
resolution
Switch AHD/CVI
(requires power cycle)1
CVBS
output ON OFF OFF OFF
Decrease CVBS
underscan
Increase CVBS
underscan
Switch CVBS output
4:3/16:9
Dual input OFF ON OFF OFF CVBS Input (main) CVBS Input (secondary) Switch 4:3/16:9
(CVBS main input only)
PIP2output OFF ON ON OFF
A
djust PIP positioning
counterclockwise
A
djust PIP positioning
clockwise Switch PIP main source
PIP output OFF ON ON ON Decrease PIP sizing Increase PIP sizing N/A
Installation:
1. Determine the location where the 4-in-1 HD to HDMI Converter will be installed.
2. Use the DIP switches to set the desired output mode.
3. Plug the BNC cable from the CCTV camera to the CVBS Input (Main) BNC connector on the converter.
4. Plug the remaining VGA, HDMI, and BNC output cables into their respective ports as necessary.
a. For loop output, connect the other end of the BNC output cable to the local DVR or monitor.
b. For CVBS output, connect the other end of the BNC output cable to the local DVR or monitor.
c. For dual video input, connect the other end of the BNC output cable to the secondary CCTV camera.
5. Plug the 12VDC adapter into the converter.
6. Once all cables are routed use the included mounting screws and mounting screw anchors to
permanently mount the unit.
7. Use the function buttons to adjust the output resolution, CVBS underscan, picture-in-picture position, or
picture-in-picture size based on the DIP switch settings.
8. If needed, adjust your monitor settings according to the manufacturer’s instructions.
1 If an HD-CVI or HD-AHD source is used and the image displayed is B&W then press both function buttons at the same time and power
cycle the converter. Upon power up the image will display correctly. HD-TVI does not require a power cycle to output correctly.
2 PIP: Picture-in-Picture (for dual inputs)
Sample Applications:
Loop Output Application:
Resolution
12VDC
A
dapte
r
HDMI
Monito
r
VGA
Monitor
HD Analog
Camera
HD Analog DVR
On
1 2 3 4
Loop output
DIP switch settings:
CVBS Output Application:
On
1 2 3 4
CVBS output
DIP switch settings:
VGA
Monitor
Security
Monitor
HD Analog
Camera
Underscan
12VDC
A
dapte
r
HDMI
Monito
r

ENFORCER 4-in-1 HD to HDMI Converter
4SECO-LARM U.S.A., Inc.
HDMI or VGA monitor does not
display properly
Make sure power, input, and output cables are firmly
connected to the converter.
Make sure the CCTV inputs are turned on.
Make sure the video output devices are turned on.
Test the cables between the converter and video output
devices to ensure they are functional.
HDMI Output side LED not lit Ensure relevant connector is firmly connected.
VGA Output side LED not lit Ensure correct mode is selected using the DIP switches.
HD-AHD or HD-CVI outputting B&W video Press both function switches at the same time and
reset power.
IMPORTANT: Users and installers of this product are responsible for ensuring this product complies with all national,
state, and local laws and statutes related to monitoring and recording audio and video signals. SECO-LARM will not be
held res
p
onsible for the use of this
p
roduct in violation of an
y
current laws or statutes.
FCC COMPLIANCE STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM
reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks
are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2017 SECO-LARM U.S.A., Inc.
A
ll
rights reserved.
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for two (2) years from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or
replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if
damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration,
improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment
is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of
SECO-LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at SECO-LARM’s
option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property
damage of any kind to the purchaser or anyone else.
Sample Applications (Continued):
SECO-LARM
® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606 Website: www.seco-larm.com
Phone:
(
949
)
261-2999
|
(
800
)
662-0800 Email: sales
@
seco-larm.com
®PITSW4
MI_VC-3YAQ_170515.docx
Troubleshooting:
Dual Input Application (Same Cable Connections Also Used for PIP):
VGA
Monitor
HD Analog
Camera
HD Analog
Camera
Input Selec
t
12VDC
A
dapte
r
HDMI
Monito
r
On
1 2 3 4
Dual Input
DIP switch settings:
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.