EnGenius ESR-9850 User manual

ESR9850 Wireless 11N Gigabit AP Router
Quick Start Guide
Connect the supplied power-adapter to the power inlet port and connect it to a wall
outlet. Then, the router automatically enters the self-test phase. During self-test phase,
Power LED will blink briefly, and then will be lit continuously to indicate that this
product is in normal operation.
CHECK
•A standard CD-ROM drive
•Internet connection should be setup & ready to use (ADSL or cable modem).
•Modem must provide RJ45 port to connect with ESR9850.
•Microsoft Windows compatible PC/Notebook with UPnP enabled network adapter
•CAT 5 network cable(s), RJ45 port on PC/Notebook.
STEP 1
Connect ESR9850 WAN port & your modem WAN port with RJ45 cable.
STEP 2
Power up ESR9850. POWER led on front panel lights up & remains stable.
STEP 3
Connect ESR9850 LAN port & PC/Notebook RJ45 port with network cable.
STEP 4
Insert Wizard CD into your CD-ROM drive. If Wizard does not start automatically,
please browse it with Windows Explorer.
Click on “Wizard.exe” to activate SMART WIZARD.

Quick Start Guide – ESR9850 Wireless Broadband Router.
Please click on Setup Wizard and follow the instruction given to complete
the device initiation configuration.
Thank you for supporting EnGenius.