Enitial Lab Furniture of America CM7561CK User manual

1/10
MODEL #
CM7561CK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 21-03-11
Phillips Screwdriver
(Not Included)
(Included)
Allen Wrench
Wrench
(Included)
3 - People
Recommended

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX10

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ X10

4 / XXXXX10

1/10
MODEL #
CM7561-CK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 20-05-26
2 - Persons
Recommended
ASSEMBLY INSTRUCTIONS
1
2
Part#1 x1pc
Part#2 x2pcs
8 / 10
CKING BED
CM7561-CK
#1 1pc #3 1pc
5 / 10
#2 2pcs
#A 14pcs
#B 14pcs
#C 14pcs
#E 8pcs
7 / 10
Hardware
#A x14pcs
Hardware
#B x14pcs
Exploded View
#4 2pcs
#5 1pc #7 8pcs
#6 4pcs
Headboard Panel HB Leg (L&R) Footboard Side Rail
HB Support Bed Slat Support Leg
#D 2pcs
#F 8pcs #G 8pcs
Bolt
Ø5/16" x 1-3/4''
Flat Washer
Ø5/16"
Allen Wrench
4mm
Screw
#4 x 1-3/16"
Threaded Pins
Ø5/16" x 3-1/2" Hex Nut
Ø5/16"
#I 1pc
Wrench
12mm
4 / 103 /102 / 10
ASSEMBLY INSTRUCTIONS
9 / 10
4
3
Hardware
#D x1pc
Hardware
#C x14pcs
Part #6 x4pcs
6 /10
Disignation
Carton Part Hardware
CM7561-CK-HB
Headboard Panel
HB Leg (L&R)
HB Support
#1
#5
#2
#A 14pcs
#B 14pcs
Lock Washer
Ø5/16"
#C 14pcs
#D 1pc
Footboard #3
#6
Bed Slat
Support Leg #7
#E 8pcs
#F 8pcs
#G 8pcs
#I 1pc
Side Rail #4
#H 8pcs
#H 8pcs
Part #1 x1pc
Hardware
#F x8pcs
Hardware
#G x8pcs
Hardware
#I x1pc
Hardware
#H x8pcs
ASSEMBLY INSTRUCTIONS
10/10
5
Half Moon washer
Ø5/16"
#1
#2L
#5
#2R
CM7561-CK-FB
CM7561-CK-R
Part #3 x1pc
Part #4 x2pcs
Part #7 x8pcs
Hardware
#E x8pcs
#8 2pcs
Top Bed Rail
#J 12pcs #L 12pcs
Bolt
Ø1/4" x 1-3/4''
Flat Washer
Ø1/4"
#K 12pcs
Lock Washer
Ø1/4"
Top Bed Rail #8
#K 12pcs
#J 12pcs
#L 12pcs
#D 1pc
#6
#7
x4
#7
#1
#2R
#4
#8
#2L
#4
#3
#6
#7
#4
#6
#4
#8
#4
#4
#4
#L #K #J
#D
Part #5 x1pc
#3
Part #8 x2pcs
Hardware
#J x12pcs
Hardware
#K x12pcs
Hardware
#D x1pc
Hardware
#L x12pcs
C:\Users\Admin\Pictures\Screenshots\Screenshot (6).png
#F
#H
#G
#I
#C#B#A
#D
#C
#B
#D #A
Prepare 12 bolts assembly by inserting lock washer (#K), then flat washer (#L) onto bolts (#J). Align
Top Bed Rail (#8) to the holes of the Side Rail (#4). Secure with bolts (#J).
#4
#8
#5 #8
#1
Phillips Screwdriver
(Not Included)
(Included)
Allen Wrench
Wrench
(Included)
Attach threaded pins (#F) to the holes of the headboard (#1) and footboard (#3). Align the side rails (#4) to
the threaded pins (#F) that are attached to headboard (#1) and footboard (#3). Secure by using washer
(#H), with hex nut (#G).
Prepare 10 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A). Align
headboard legs (#2R/L) to the holes of the headboard (#1). Secure with bolts (#A).
Prepare 4 bolts assembly by inserting lock washer (#B),
then flat washer (#C) onto bolts (#A).
Align headboard support (#5) to the holes of the
headboard (#1), then Secure with bolts (#A).
Attach support legs (#7) to the slats (#6). Adjust leveler
of the support leg (#7) according to ground level.
Align Bed Slat (#6) to the Side Rail
(#4), then Secure with Screw (#E).
#E
CM7561-CKis packed in 3 caces
1/10
MODEL #
CM7561CK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 21-03-11
2 - People
Recommended
CKING BED
CM7561CK
#1 1pc #3 1pc
5 / 10
#2 2pcs
#A 14pcs #C 14pcs
#E 8pcs
#4 2pcs
#5 1pc #7 8pcs
#6 4pcs
Headboard Panel HB Leg (L&R) Footboard Side Rail
HB Support Bed Slat Support Leg
28 x 28 x 210mm
#D 2pcs
#F 8pcs #G 8pcs
Bolt
Ø5/16" x 1-3/4''
Flat Washer
Ø5/16"
Allen Wrench
4mm
Screw
#4 x 1-3/16"
Threaded Pins
Ø5/16" x 3-1/2"
Hex Nut
Ø5/16"
#I 1pc
Wrench
12mm
4 / 103 /102 / 10
#B 14pcs
Lock Washer
Ø5/16"
#H 8pcs
Half Moon washer
Ø5/16"
#8 2pcs
Top Bed Rail
#J 12pcs #L 12pcs
Bolt
Ø1/4" x 1-3/4''
Flat Washer
Ø1/4"
#K 12pcs
Lock Washer
Ø1/4"
Phillips Screwdriver
(Not Included)
(Included)
Allen Wrench
Wrench
(Included)
Ø1/4"

1/10
MODEL #
CM7561-CK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 20-05-26
2 - Persons
Recommended
ASSEMBLY INSTRUCTIONS
1
2
Part #1 x1pc
Part #2 x2pcs
8 / 10
CKING BED
CM7561-CK
#1 1pc #3 1pc
5 / 10
#2 2pcs
#A 14pcs
#B 14pcs
#C 14pcs
#E 8pcs
7 / 10
Hardware
#A x14pcs
Hardware
#B x14pcs
Exploded View
#4 2pcs
#5 1pc #7 8pcs
#6 4pcs
Headboard Panel HB Leg (L&R) Footboard Side Rail
HB Support Bed Slat Support Leg
#D 2pcs
#F 8pcs #G 8pcs
Bolt
Ø5/16" x 1-3/4''
Flat Washer
Ø5/16"
Allen Wrench
4mm
Screw
#4 x 1-3/16"
Threaded Pins
Ø5/16" x 3-1/2" Hex Nut
Ø5/16"
#I 1pc
Wrench
12mm
4 / 103 /102 / 10
ASSEMBLY INSTRUCTIONS
9 / 10
4
3
Hardware
#D x1pc
Hardware
#C x14pcs
Part #6 x4pcs
6 /10
Disignation
Carton Part Hardware
CM7561-CK-HB
Headboard Panel
HB Leg (L&R)
HB Support
#1
#5
#2
#A 14pcs
#B 14pcs
Lock Washer
Ø5/16"
#C 14pcs
#D 1pc
Footboard #3
#6
Bed Slat
Support Leg #7
#E 8pcs
#F 8pcs
#G 8pcs
#I 1pc
Side Rail #4
#H 8pcs
#H 8pcs
Part#1 x1pc
Hardware
#F x8pcs
Hardware
#G x8pcs
Hardware
#I x1pc
Hardware
#H x8pcs
ASSEMBLY INSTRUCTIONS
10/10
5
Half Moon washer
Ø5/16"
#1
#2L
#5
#2R
CM7561-CK-FB
CM7561-CK-R
Part#3 x1pc
Part#4 x2pcs
Part #7 x8pcs
Hardware
#E x8pcs
#8 2pcs
Top Bed Rail
#J 12pcs #L 12pcs
Bolt
Ø1/4" x 1-3/4''
Flat Washer
Ø1/4"
#K 12pcs
Lock Washer
Ø1/4"
Top Bed Rail #8
#K 12pcs
#J 12pcs
#L 12pcs
#D 1pc
#6
#7
x4
#7
#1
#2R
#4
#8
#2L
#4
#3
#6
#7
#4
#6
#4
#8
#4
#4
#4
#L #K #J
#D
Part #5 x1pc
#3
Part #8 x2pcs
Hardware
#J x12pcs
Hardware
#K x12pcs
Hardware
#D x1pc
Hardware
#L x12pcs
C:\Users\Admin\Pictures\Screenshots\Screenshot (6).png
#F
#H
#G
#I
#C#B#A
#D
#C
#B
#D #A
Prepare 12 bolts assembly by inserting lock washer (#K), then flat washer (#L) onto bolts (#J). Align
Top Bed Rail (#8) to the holes of the Side Rail (#4). Secure with bolts (#J).
#4
#8
#5 #8
#1
Phillips Screwdriver
(Not Included)
(Included)
Allen Wrench
Wrench
(Included)
Attach threaded pins (#F) to the holes of the headboard (#1) and footboard (#3). Align the side rails (#4) to
the threaded pins (#F) that are attached to headboard (#1) and footboard (#3). Secure by using washer
(#H), with hex nut (#G).
Prepare 10 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A). Align
headboard legs (#2R/L) to the holes of the headboard (#1). Secure with bolts (#A).
Prepare 4 bolts assembly by inserting lock washer (#B),
then flat washer (#C) onto bolts (#A).
Align headboard support (#5) to the holes of the
headboard (#1), then Secure with bolts (#A).
Attach support legs (#7) to the slats (#6). Adjust leveler
of the support leg (#7) according to ground level.
Align Bed Slat (#6) to the Side Rail
(#4), then Secure with Screw (#E).
#E
CM7561-CKis packed in 3 caces
1/10
MODEL #
CM7561CK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 21-03-11
2 - People
Recommended
CKING BED
CM7561CK
#1 1pc #3 1pc
5 / 10
#2 2pcs
#A 14pcs #C 14pcs
#E 8pcs
#4 2pcs
#5 1pc #7 8pcs
#6 4pcs
Headboard Panel HB Leg (L&R) Footboard Side Rail
HB Support Bed Slat Support Leg
28 x 28 x 210mm
#D 2pcs
#F 8pcs #G 8pcs
Bolt
Ø5/16" x 1-3/4''
Flat Washer
Ø5/16"
Allen Wrench
4mm
Screw
#4 x 1-3/16"
Threaded Pins
Ø5/16" x 3-1/2"
Hex Nut
Ø5/16"
#I 1pc
Wrench
12mm
4 / 103 /102 / 10
#B 14pcs
Lock Washer
Ø5/16"
#H 8pcs
Half Moon washer
Ø5/16"
#8 2pcs
Top Bed Rail
#J 12pcs #L 12pcs
Bolt
Ø1/4" x 1-3/4''
Flat Washer
Ø1/4"
#K 12pcs
Lock Washer
Ø1/4"
Phillips Screwdriver
(Not Included)
(Included)
Allen Wrench
Wrench
(Included)
6 / 10
Exploded View
#1
#7
#2R
#4
#5
#2L
#6
#4
#3
Ø1/4"
#8

1/10
MODEL #
CM7561-CK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 20-05-26
2 - Persons
Recommended
ASSEMBLY INSTRUCTIONS
1
2
Part#1 x1pc
Part#2 x2pcs
8 / 10
CKING BED
CM7561-CK
#1 1pc #3 1pc
5 / 10
#2 2pcs
#A 14pcs
#B 14pcs
#C 14pcs
#E 8pcs
7 / 10
Hardware
#A x14pcs
Hardware
#B x14pcs
Exploded View
#4 2pcs
#5 1pc #7 8pcs
#6 4pcs
Headboard Panel HB Leg (L&R) Footboard Side Rail
HB Support Bed Slat Support Leg
#D 2pcs
#F 8pcs #G 8pcs
Bolt
Ø5/16" x 1-3/4''
Flat Washer
Ø5/16"
Allen Wrench
4mm
Screw
#4 x 1-3/16"
Threaded Pins
Ø5/16" x 3-1/2" Hex Nut
Ø5/16"
#I 1pc
Wrench
12mm
4 / 103 /102 / 10
ASSEMBLY INSTRUCTIONS
9 / 10
4
3
Hardware
#D x1pc
Hardware
#C x14pcs
Part #6 x4pcs
6 /10
Disignation
Carton Part Hardware
CM7561-CK-HB
Headboard Panel
HB Leg (L&R)
HB Support
#1
#5
#2
#A 14pcs
#B 14pcs
Lock Washer
Ø5/16"
#C 14pcs
#D 1pc
Footboard #3
#6
Bed Slat
Support Leg #7
#E 8pcs
#F 8pcs
#G 8pcs
#I 1pc
Side Rail #4
#H 8pcs
#H 8pcs
Part #1 x1pc
Hardware
#F x8pcs
Hardware
#G x8pcs
Hardware
#I x1pc
Hardware
#H x8pcs
ASSEMBLY INSTRUCTIONS
10/10
5
Half Moon washer
Ø5/16"
#1
#2L
#5
#2R
CM7561-CK-FB
CM7561-CK-R
Part #3 x1pc
Part #4 x2pcs
Part #7 x8pcs
Hardware
#E x8pcs
#8 2pcs
Top Bed Rail
#J 12pcs #L 12pcs
Bolt
Ø1/4" x 1-3/4''
Flat Washer
Ø1/4"
#K 12pcs
Lock Washer
Ø1/4"
Top Bed Rail #8
#K 12pcs
#J 12pcs
#L 12pcs
#D 1pc
#6
#7
x4
#7
#1
#2R
#4
#8
#2L
#4
#3
#6
#7
#4
#6
#4
#8
#4
#4
#4
#L #K #J
#D
Part #5 x1pc
#3
Part #8 x2pcs
Hardware
#J x12pcs
Hardware
#K x12pcs
Hardware
#D x1pc
Hardware
#L x12pcs
C:\Users\Admin\Pictures\Screenshots\Screenshot (6).png
#F
#H
#G
#I
#C#B #A
#D
#C
#B
#D #A
Prepare 12 bolts assembly by inserting lock washer (#K), then flat washer (#L) onto bolts (#J). Align
Top Bed Rail (#8) to the holes of the Side Rail (#4). Secure with bolts (#J).
#4
#8
#5 #8
#1
Phillips Screwdriver
(Not Included)
(Included)
Allen Wrench
Wrench
(Included)
Attach threaded pins (#F) to the holes of the headboard (#1) and footboard (#3). Align the side rails (#4) to
the threaded pins (#F) that are attached to headboard (#1) and footboard (#3). Secure by using washer
(#H), with hex nut (#G).
Prepare 10 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A). Align
headboard legs (#2R/L) to the holes of the headboard (#1). Secure with bolts (#A).
Prepare 4 bolts assembly by inserting lock washer (#B),
then flat washer (#C) onto bolts (#A).
Align headboard support (#5) to the holes of the
headboard (#1), then Secure with bolts (#A).
Attach support legs (#7) to the slats (#6). Adjust leveler
of the support leg (#7) according to ground level.
Align Bed Slat (#6) to the Side Rail
(#4), then Secure with Screw (#E).
#E
CM7561-CKis packed in 3 caces
1/10
MODEL #
CM7561CK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 21-03-11
2 - People
Recommended
CKING BED
CM7561CK
#1 1pc #3 1pc
5 / 10
#2 2pcs
#A 14pcs #C 14pcs
#E 8pcs
7 / 10
#4 2pcs
#5 1pc #7 8pcs
#6 4pcs
Headboard Panel HB Leg (L&R) Footboard Side Rail
HB Support Bed Slat Support Leg
28 x 28 x 210mm
#D 2pcs
#F 8pcs #G 8pcs
Bolt
Ø5/16" x 1-3/4''
Flat Washer
Ø5/16"
Allen Wrench
4mm
Screw
#4 x 1-3/16"
Threaded Pins
Ø5/16" x 3-1/2"
Hex Nut
Ø5/16"
#I 1pc
Wrench
12mm
4 / 103 /102 / 10
#B 14pcs
Lock Washer
Ø5/16"
#H 8pcs
Half Moon washer
Ø5/16"
#8 2pcs
Top Bed Rail
#J 12pcs #L 12pcs
Bolt
Ø1/4" x 1-3/4''
Flat Washer
Ø1/4"
#K 12pcs
Lock Washer
Ø1/4"
Phillips Screwdriver
(Not Included)
(Included)
Allen Wrench
Wrench
(Included)
6 / 10
Exploded View
#1
#7
#2R
#4
#5
#2L
#6
#4
#3
#B 14pcs
Disignation
Carton Part Hardware
CM7561CK-HB
Headboard Panel
HB Leg (L&R)
HB Support
#1
#5
#2
#A 14pcs
#C 14pcs
#D 1pc
Footboard #3
#6
Bed Slat
Support Leg #7
#E 8pcs
#F 8pcs
#G 8pcs
#I 1pc
Side Rail #4
#H 8pcs
CM7561CK-FB
CM7561CK-R
Top Bed Rail #8
#K 12pcs
#J 12pcs
#L 12pcs
#D 1pc
CM7561-CKis packed in 3 caces
Ø1/4"
#8

ASSEMBLY INSTRUCTIONS
1
2
Part#1 x1pc
Part#2 x2pcs
8 / 10
Hardware
#A x14pcs
Hardware
#B x14pcs
Hardware
#C x14pcs
Hardware
#F x8pcs
Hardware
#G x8pcs
Hardware
#H x8pcs
Part#3 x1pc
Part#4 x2pcs
Part#5 x1pc
#1
#2L
#5
#C
#2R
#B #A
#C
#B
#D
#A
#D
#F
#4
#4
#H
#G
#I
#1
#3
Align HB legs (#2R/L) to the holes of the
headboard (#1) and HB support (#5),
then secure by using bolts (#A) with
washers (#B,C).
Attach threaded pins (#F) to the headboard (#1) and footboard
(#3), then align the side rails (#4) to the threaded pins (#F). Secure
by using hex nut (#G) with washer (#H).

ASSEMBLY INSTRUCTIONS
9 / 10
4
3
Part #6 x1pc
Part #7 x2pcs
Hardware
#E x8pcs
#4
#6
#4
#E
#6
#7
x 4 #7
Attach support legs (#7) to the bed slats (#6). Adjust leveler of the
support legs (#7) according to ground level.
Align slats (#6) to the side rails (#4), then secure by using screws (#E).

ASSEMBLY INSTRUCTIONS
5
#8
#4
#L #K #J
#D
Part #8 x2pcs
Hardware
#J x12pcs
Hardware
#K x12pcs
Hardware
#L x12pcs
#4
#8
6
10 /10
Align top bed rails (#8) to the side rails, then secure
by using bolts (#J) with washers (#K,L).