Enitial Lab Furniture of America HFW-1871C4 User manual

Page 1 of 14 REV.18-01-15
HFW-1871C4

Page 2 of 14

Page 3 of 14

Page 4 of 14

Page 5 of 14
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS

Q
MINI BAR
ASSEMBLY INSTRUCTIONS MODEL # HFW-1871C4
please keep for future reference PARTS LIST
HARDWARE LIST
DIMENSIONS : 31.5"(W)*15.7"(D)*42.8"(H)
Page 6 of 14
1PC
A
13 16PCS 15 13PCS 16 10PCS 17 1PC
1PC
B
112PCS 330PCS 454PCS 620PCS1PC 212PCS
78PCS 9 10 16PCS 11 2PCS 12 2PCS
14 4SETS
2.2"
82SETS
0.8" 2SETS(8pcs)
0.5"
0.5"
18 1PC
1PC 1PC
D1PC
1PC
F
E
1PC 1PC
H
G1PC
I1PC J
1PC 1PC
LK 2PCS 2PCS NM
2PCS 2PCS
P
O
2PCS 1PC
R
A
B
C
D
E
I
L
M
M
19 1PC
C

MINI BAR
MODEL#HFW-1871C4
Get Ready.
Please group boards as below.
Page 7 of 14
Drawer
2PCS 2PCS
NM 2PCS 2PCS
P
O Q 2PCS
1PCG1PC
K1PC I1PC
J1PC H1PC
F
1PC
E1PC R1PC
L1PC
B
1PCC1PC
D
Body
1PC
A

STEP : 1
Hardware 1 x 4 pcs
Hardware 2 x 4 pcs
Hardware 3 x 4 pcs
Hardware 6 x 8 pcs
Hardware 8 x 2 sets
Hardware 9 x 4 pcs drawer rails
Hardware 10 x 8 pcs
ASSEMBLY INSTRUCTIONS
Page 8 of 14
Identifying Drawer's Rails (a.k.a. Runners, Glides, Slides or Guides)
An assembly of ONE drawer requires a set of 4 different rails: right panel rail, left panel rail, right
drawer rail and left drawer rail. To identify which rail belongs to which part, please read completely
first before assembling.
To Determine Right/Left Panel Rail: Place the panel rail flat on its back with the roller position on
the left hand side. If there are two holes above the roller and the other end is slightly downward angle
then it is the LEFT PANEL RAIL. If there are two holes below the roller and the other end is slightly
upward angle, then it is the RIGHT PANEL RAIL. The right and left panel rails are mirror image of
each other.If needed, label or separate each rail for easy identification.
To Determine Right/Left Drawer Rail: Place the drawer rail with the round and oval holes resting
flat on the surface with its roller on the right hand side. If the roller is facing the top, then it is the
LEFT DRAWER RAIL and if the roller is facing the bottom, then it is the RIGHT DRAWER RAIL. The
right and left drawer rails are mirror image of each other. If needed, label or separate each rail for
easy identification.
Mounting the Panel Rail: The panel rail is constructed to be mounted flat. Make sure the roller is
position on the front of the panel and the screw holes are aligned with the pre-drilled holes of the
panel.
Mounting the Drawer Rail: The drawer rail is constructed to be mounted on the side of the drawer .
Make sure the roller is position on the SIDE REAR of the drawer and the screw holes are aligned
with the pre-drilled holes on the side of the drawer.
N
O
P
M
6
6
8
NP
O
M
Q
9
9
10
10
Side View
Right Drawer Rail
Front View
FIRST STEP
SECOND
STEP
THIRD STEP

ASSEMBLY INSTRUCTIONS
Page 9 of 14
STEP : 2
Hardware 1 x 8 pcs
Hardware 3 x 20 pcs
Hardware 16 x 4 pcs
Hardware 17 x 1 pc
1
A
B
C
G
DK
L
E
1
Dowel hole
17
16
16
Use a dab of glue on dowel holes
before inserting dowels (#3).

ASSEMBLY INSTRUCTIONS
STEP : 3
Page 10 of 14
Hardware 3 x 6 pcs
Hardware 9 x 4 pcs panel rails
Hardware 10 x 8 pcs
STEP : 4
Hardware 6 x 8 pcs
K
I
Dowel hole
G
G
I
J
H
F
6
6
6
6
6
6
6
6
finish
finish
Use this image as a reference on which
holes on drawer rails are supposed to be
aligned to the pre-drilled holes on
panels (#H,J).

ASSEMBLY INSTRUCTIONS
Page 11 of 14
STEP : 5
Hardware 6 x 4 pcs
STEP : 6
E
R
H
J
I
G
Hardware 2 x 4 pcs
Dowel hole
F
B
L
Slide back panel (#R) to the grooves of
the surround panels before attaching
panel (#E).

Hardware 5 x 2 pcs
Hardware 7 x 4 pcs
Hardware 16 x 6 pcs
Hardware 18 x 1 pc
Hardware 19 x 1 pc
ASSEMBLY INSTRUCTIONS
Page 12 of 14
STEP : 7
B
C
G
G
7
7
7
5
B
D
H
H
7
7
Hardware 5 x 2 pcs
Hardware 7 x 4 pcs
STEP : 8
19
Dowel hole
Close up of panel (#G)
connecting to panel (#C).
Close up of how panel (#D)
secures to panel (#H).

ASSEMBLY INSTRUCTIONS
Page 13 of 14
Hardware 11 x 2 pcs
Hardware 12 x 2 pcs
Hardware 13 x 16 pcs
STEP : 9
11
(lock)
11
(lock)
12 12
13
13 13
13
B
Hardware 2 x 4 pcs
Hardware 15 x 13 pcs
STEP : 10
15
27
5
15
15
15
A
C
D
M
M
Apply stickers (#15) to cover cam locks (#2),
screws (#5), and bolts (#7).

ASSEMBLY INSTRUCTIONS
Page 14 of 14
Hardware 14 x 4 pcs
STEP : 11
14 14
14
14
A
ASSEMBLY IS COMPLETED
Make sure the unit is rested on a flat
surface and does not feel loose or
wobbly. If it does, double check all
bolts/screws are secured and properly
tightened.
Align and insert fixative plate to the grooves of the back panels,
then secure by using screws (#14).