Enitial Lab Furniture of America CM1928 User manual

1 / 11
MODEL #
CM1928
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
3 - People
(Included)
Allen Wrench
Recommended
Phillips
Screwdriver
(Not Included)
VERSION # 20-09-24

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX11

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX11

4 / XXXXXXX11

DAYBED
CM1928
5 / 11
#1 1pc #2 1pc
#A 8set #B 8pcs #C 2pcs #D 52pcs
#3 1pc
#5 1pc #6 1pc #7 2pcs
#E 8pcs #F 4pcs #G 2pcs
#4 1pc
#8 2set
Headboard (L) Headboard (R) Guardrail Side Rail
Front Trundle
Panel
#H 1pc
Bolt & Barrel Nut Screw
Ø1/4" x 4"
Screw
#4 x 20mm
Allen Wrench 4mm
Wheel Wood Dowel
Ø10 x 40mm
Rear Trundle
Panel
Side Trundle
Panel
Twin Slat Kit
(13pcs)
Bolt
Ø1/4" x 1-3/16"
Screw
#4 x 30mm
Ø1/4" x 4"

Exploded View
6 / 11
#1
#2
#3
#4
#5
#6
#7
#7
#8
#8

Carton Disignation Part Hardware
CM1928-1
CM1928 is packed in 2 cases
CM1928-2
#A x 8set
#C x 2pcs
#B x 8pcs
#G x 2pcs
#H x 1pc
#1
#2
#3
#4
#5
#6
#7
#8
#D x 52pcs
#E x 8pcs
#F x 4pcs
Headboard Left
Headboard Right
Twin Slat Kit
#8
Twin Slat Kit
Guardrail
Side Rail
Front Trundle
Panel
Rear Trundle
Panel
Side Trundle
Panel
7 / 11

ASSEMBLY INSTRUCTIONS
1
2
Part #1 x 1pc
Part #2 x 1pc
Hardware #A x 4set
Hardware #C x 2pcs
Hardware #A x 4set
Part #3 x 1pc
Part #4 x 1pc
8 / 11
#1
#2
#3
#H
#A
#A
#4
#A
#A
#H
#C
1) Align guardrail (#3) to the holes
of the headboards (#1,2). Insert
barrel nuts to the holes in the back
of the guardrail (#3). Secure bottom
holes by attaching bolts (#A) to
barrel nuts.
2) Secure top holes by
using bolts (#C).
Align side rails (#4) to the holes of the headboards (#1,2). Insert barrel nuts to the holes
of the side rails (#4). Secure by attaching bolts (#A) to the barrel nuts of the side rail (#4).

9 / 11
ASSEMBLY INSTRUCTIONS
3
4
Part #8 x 1set
Hardware #D x 26pcs
Hardware #G x 2pcs
#G
#8
#D
Align twin slat kit (#8) to the side rails of the
day bed. Secure by using screws (#D).
Insert dowels (#G) to the bottom hole of the headboard (#1,2).

10 / 11
ASSEMBLY INSTRUCTIONS
5
6
Hardware #D x 26pcs
Part #8 x 1set
Hardware #B x 8pcs
Part #5 x 1pc
Part #6 x 1pc
Part #7 x 2pcs
#D
#8
#5
#7
#7 #6
#B
#H
Align front and rear trundle panels (#5,6) to the holes of the side panels (#7), then secure with bolts (#B).
Align twin slat kit (#8) to the front and rear trundle panels (#5,6), then secure with screws (#D).

11 / 11
ASSEMBLY INSTRUCTIONS
7
8
Hardware #E x 8pcs
Hardware #F x 4pcs
#F
#E
Align the wheels (#F) to the bottom corners of the trundle.
Secure by using screws (#E). There will be no pre-drilled
holes.