Sonoma CAMERON User manual

1
PART LIST QUANTITY
A1 PC
B4 PCS
C1 PC
D1 PC
E20 PCS + 1 PC
F20 PCS + 1 PC
G10 PCS + 1 PC
H1 PC
SAVE THESE INSTRUCTIONS
SONOMA CAMERON 4 TIER BOOKCASE ASSEMBLY INSTRUCTIONS
ASSEMBLE ON A FLAT, PROTECTED SURFACE
FIGURE
DESCRIPTION
TOP
SHELF
FLAT WASHER
ALLEN WRENCH
FOR MISSING OR INCORRECT PARTS/HARDWARE, CONTACT THE MANUFACTURER'S CUSTOMER SERVICE DIRECTLY AT
1-847-608-5202 OR CUSTOMER[email protected]
WOOD DOWEL
RIGHT SIDE FRAME
BOLT
LEFT SIDE FRAME

2
STEP 2
A. INSERT WOOD DOWEL (G) INTO THE DOWEL HOLES ON
SHELVES (B) AS SHOWN.
STEP 1
A. PLACE TOP (A) UPSIDE DOWN ON A FLAT, PROTECTED
SURFACE.
B. INSERT WOOD DOWELS (G) INTO THE DOWEL HOLES ON
TOP FRAME (A) AS SHOWN.
STEP 3
A. PLACE RIGHT SIDE FRAME (C) ON A FLAT, PROTECTED
SURFACE.
B. ATTACH TOP (A) AND SHELVES (B) TO THE RIGHT SIDE
FRAME (C) WITH BOLTS (E), FLAT WASHERS (F) AND LOOSELY
TIGHTEN USING ALLEN WRENCH (H).
ASSEMBLY INSTRUCTIONS (CONTINUED)

3
** WE RECOMMEND THAT YOU SAVE THE ALLEN WRENCH AND PERIODICALLY TIGHTEN ALL BOLTS.
WEIGHT LIMIT:
TOP: 100 LBS, SHELVES: 75 LBS
CARE AND CLEANING
WIPE CLEAN WITH A SOFT, DRY CLOTH AS NEEDED.
DO NOT SIT, STAND, OR CLIMB ON THE BOOKCASE.
INTENDED FOR INDOOR USE ONLY.
STEP 4
A. ATTACH LEFT SIDE FRAME (D) TO ASSEMBLED UNIT FROM
STEP 3 WITH BOLTS (E), FLAT WASHERS (F) AND LOOSELY
TIGHTEN USING ALLEN WRENCH (H).
STEP 6
A. ROTATE ASSEMBLED UNIT UPRIGHT.
STEP 5
A. ROTATE THE BOOKCASE UPSIDE DOWN ON A FLAT,
PROTECTED SURFACE.
B. FULLY TIGHTEN ALL BOLTS (E) AND FLAT WASHERS (F) WITH
ALLEN WRENCH (H).
FOR MISSING OR INCORRECT PARTS/HARDWARE, CONTACT THE MANUFACTURER'S CUSTOMER SERVICE DIRECTLY AT 1-
847-608-5202 OR [e-mail]
ASSEMBLY INSTRUCTIONS (CONTINUED)

4
SAVE THESE INSTRUCTIONS
ANTI-TIP HARDWARE MOUNTING INSTRUCTIONS FOR DRYWALL
PHILIPS HEAD SCREW DRIVER, DRILL, 7/32" DRILL BIT NEEDED FOR ASSEMBLY; NOT INCLUDED.
FOR SAFETY REASONS, WE RECOMMEND THAT YOU INSTALL THE INCLUDED ANTI-TIP HARDWARE TO HELP
PREVENT THE BOOKCASE FROM UNEXPECTEDLY TIPPING OR SHIFTING.
THE INCLUDED MATERIALS ARE DESIGNED TO MOUNT THE ANTI-TIP HARDWARE TO DRYWALL.
PLEASE CONSULT A REPRESENTATIVE AT A HARDWARE/HOME IMPROVEMENT STORE TO DISCUSS ADDITIONAL
MOUNTING OPTIONS FOR OTHER TYPES OF WALLS.
STEP 1
A. DETERMINE WHERE THE BOOKCASE IS PLACED, THEN
MARK THE POSITION OF MOUNTING BRACKET ON THE
WALL.
B. DRILL HOLES IN THE WALL. PRESS THE PLASTIC
ANCHOR (L) INTO THE HOLES.
C. POSITION ONE END OF MOUNTING BRACKET (K) OVER
THE PLASTIC ANCHOR (L) AND USE LONG SCREWS (I)
TO ATTACH THE MOUNTING BRACKET (K) TO THE WALL.
TIGHTEN LONG SCREWS (I) BY USING PHILLIPS HEAD
SCREWDRIVER (NOT INCLUDED).

5
SAVE THESE INSTRUCTIONS
ANTI-TIP HARDWARE MOUNTING INSTRUCTIONS FOR DRYWALL
STEP 2
A. USE SHORT SCREWS (J) TO ATTACH THE
OTHER END OF MOUNTING BRACKET (K)
TO THE CENTER OF SHELF FRAME OF
THE FIRST TIER OF THE BOOKCASE.
B. TIGHTEN SHORT SCREWS (J) BY USING
PHILLIPS HEAD SCREWDRIVER (NOT
INCLUDED).
STEP 3
A. PLACE THE BOOKCASE SO THAT THE
MOUNTING BRACKET (K) ON THE BACK
OF BOOKCASE IS IN LINE WITH
MOUNTING BRACKET (K) ON THE WALL.
B. FEED THE ZIP TIE (M) THROUGH EACH
MOUNTING BRACKET (K) AND SECURE IT.
C. CHECK TO MAKE SURE THE ZIP TIE (M) IS
SECURELY TIGHTENED AND LOCKED TO
MOUNTING BRACKETS (K).