Enlaps Tikee User manual

QUICKSTART GUIDE TIKEE/TIKEE PRO

This quick start guide is non exhaustive. Before using your
Tikee, please read carefully all the safety precautions and
instructions for use in the manual available at https://enlaps.io/
user-guide/?lang=en
Follow us on
Introduction

Basics
Content
Requirements
A microSD card (not provided) is required to use your Tikee :
- Compatible cards : microSDHC/ microSDXC.
Class U1 required, U3 recommanded
- Minimum capacity : 8 Go - up to 128 Go
TikeePRO users: an activated microSIM (not provided) is required
to upload data using 4G connectivity.
1x Tikee
or 1x TikeePRO
1x Quick
Start Guide
1x Hexagon
wrench
1x Microfiber
cloth

Power button
Press and hold for three
seconds to power on/off
Micro SIM slot
Only for TikeePRO
Power LED and trigger LED
Indicate status, battery level and
in-progress sequence
MicroSD card slot
Slot for memory card
Micro USB slot
Charge your Tikee
(Micro USB cable not
provided)
Trigger button
Start or stop a pre-set
timelapse sequence
Overview
Solar panel
Anti-theft system

!
Getting started
1. Remove the plastic film from the solar panel and charge the
battery of your Tikee using a micro USB cable (not provided).
Prior use, perform a full battery charge.
(LED blinking blue once completely charged)
2. Create an account on our web application at my.tikee.io
Download the mobile app Tikee Remote from Google PlayStore
or AppStore.
3. Insert a microSD card into your Tikee / TikeePRO.
Insert a microSIM card into your TikeePRO to use 4G.
4. Press 3 seconds the Power button to power on.

Save
Test connection
Wireless setup
3G / 4G
Wi
Sequence TL
LED starts blinking and then turns fixed. The color indicates battery level.
To power off press and hold the power button for 3 seconds
until the LED starts blinking.
5.
Check bluetooth is on on your mobile phone and launch
Tikee Remote mobile app close to your Tikee camera.
Log in with your user ID created during step 2.
Select your Tikee from the list.
You access directly to Tikee’s status screen:
6. Choose the wireless settings :
Optional step for oine use
Click on the Wifi icon (Tikee/TikeePRO) or the 4G icon
(TikeePRO), set the connection credentials and test connection.
This allows data to be sent from Tikee to the web app.
7. Create your first sequence :

Choose a type of sequence and configure it :
8. Properly level your camera, horizontally and vertically. Frame
your subject, to ensure a proper panorama stitching, avoid
foreground object closer than 5m in the central aera.
9. Start a timelapse by clicking on Start recording from the
mobile app or pressing the Trigger button on Tikee.
The right LED blinks every 10 seconds.
Timelapse will start at preset time. To stop ongoing recording
sequence press 3 seconds the
Trigger button again.
You can view the status of your Tikee at any time from the screen
in the mobile app Tikee Remote (close to your Tikee) or
from in the web app Mytikee.
SHORT-TERM SEQUENCE
INTERVAL < 1 MIN
An interval from 5 to 45 seconds
between each shot to record a few
hours event.
Full upload at the end of the
sequence.
SHORT-TERM SEQUENCE
INTERVAL 1 MIN AND +
Up to 24 hours between each
shot for an event that can last for
months or more.
By default upload occurs each 25
images or at least once a day.

!
10.
Follow and edit your timelapse with Mytikee web app.
Image upload needs to be activated during step 7 to move
on to the following step.
Previewing and sharing your timelapse
To preview your timelapse go to the web app at
my.tikee.io and log in. The timelapse is available once 100 photos
have been uploaded.
By default, timelapses are private.
Share them with the Community by making them public !
By the way do not forget the #tikee on social networks
so we can watch your timelapses. ;)
Want to know more?
You can edit your timelapses and configure your
Tikee remotely. Tutorials are available on the website
at enlaps.io.
If you have any questions please contact us at
[email protected] or on Facebook.