Enlighten Sauna Sierra-2 User manual

User Manual
Sierra - 2
Thank you for choosing our InfraNature Original Series!
The Infrared sauna
Congratulations on the purchase of your brand new infrared sauna. Please
carefully review and read through this material. Keep this manual and your
proof of purchase for future reference and service calls.

WELCOME FRIENDS!
We are so delighted that you have decided to take control of your life and invest in the most
important thing – your health. Soon you will discover there is more to a sauna than just “sweating”.
But first, allow us to introduce our company, what we do, why we do it and what you can expect from
us.
We began our journey a decade ago with one goal in mind… To create an Optimal Health Product. We
knew that general surface health treatments combined with inner cleansing could benefit many and
provide many positive health results.
However, through the thorough cleansing methods we have tested, many of us have experienced
headaches during a detox diet as well as lacking the ability to properly detoxify our system. There it
hit us…What if we can increase our ability to sweat to detoxify the system faster and more efficiently
without the unwelcome side effects? And how can we go about it?
Saunas have been in wide use for centuries, but the true breakthrough happened when the power of
Infrared Light was introduced into the unique health industry, specializing in detoxification and
cleansing. After much research and testing, we realized the benefits of infrared light are far more
reaching than just on the surface, or slightly underneath the skin. This was truly an extraordinary
discovery for us and we have devoted our primal business focus on exclusive manufacturing of
infrared sauna that would maximize healing potential and maintain an optimal healthy physique. The
understanding became a connection of dot – to- dot and we fell in love with our product so much, our
team uses infrared saunas daily.
We wish to share this technology and to show our passion for what we sell and believe in. It is truly
part of our personal journey, healing and inner belief that infrared saunas are safe and incredibly
effective sources for personal detoxification and more.
Please let us know if there is anything you need. We are here to help.
Happy Detox!
Enlighten Sauna Team
2

What You Need to Prepare Before Installing the Sauna
1. Choose the right Outdoor space and clear it out for the sauna.
2. When determining a location for your sauna, please keep in mind the following:
●The main power cord on the sauna must be easily accessible.
○When facing the sauna, the cord is located behind the back wall in the lower left
hand side corner.
●The location must be dry and leveled.
3. You will need a solid and leveled base. The sauna cannot sit straight on the ground.
4. Check the Electrical requirementsfor your specific unit and make sure you have it available.
Please contact an electrician if you require assistance with this.
5. For a traditional heating system: Hardwire is recommended. Plug can be sent separately if
preferred. For Infrared: it is a plug.
6. Prepare a Sealant to seal the sauna during the Installation of the sauna.
7. Tools: Phillips screwdriver, flat screwdriver, sealant gun. An Electric screwdriver will speed up
the process.
8. Print or have your manual available during the installation.
9. Tech support for installation is available only at a pre-scheduled time. Submit a ticket online to
schedule a time prior to 72 hours of installation.
10. If you plan to have an electrician on site before the sauna arrives, schedule a phone call with
our technician at least 72 hours in advance for a pre-installation process questions.
Electrical Components/Requirements
Please Read Carefully!
Infrared
Each sauna will require a dedicated circuit when plugged into an outlet according to the chart below.
A “dedicated circuit” requires that no other appliance should share the outlet/circuit with the sauna.
Failure to comply with this requirement may cause an electrical interruption and/or a diminished
performance. To avoid any potential electrical hazards, it is recommended that only a qualified
electrician installs your dedicated electrical wiring for a proper sauna functionality. Please make sure
3

that the sauna is properly grounded. Serious injury may result if the proper electrical requirements
are not met.
WARNING! Keep the sauna away from any potential hazards, including any water source or liquids.
Select a dry, suitable location for sauna installation. Do not expose the heater elements to any water
source or liquids as it may cause electrical shock. Should you have any questions, please do not
hesitate to contact the supplier.
Power Plugs
Please read the following directions carefully.
Sierra 2
Power Usage/AMPS
Wattage: 2250w
Voltage: 110/120 Volt
Near/Mid IR Wavelengths: 0 to 5
Far IR Wavelengths: 6 to 12
Amperage: 20 Amp
minimum, 30 amp recommended*
Plug: NEMA 5-20p
*Minimum 20 Amp is required for the dedicated circuit, if you run a new line we recommend for you
to have 30 Amp available.
4

Choosing Sauna’s Location
Your Enlighten outdoor sauna can stand outside without any cover or protection. The sauna requires
a solid and level surface that will not flood. The saunas are very heavy so a solid foundation is highly
recommended.
While Enlighten Outdoor saunas are specifically designed to be placed outdoors, choosing a location
without excessive rain and wind is recommended.
Installation requirements for your sauna are as follows:
1. Your Enlighten sauna is a self-contained and freestanding unit. It should not be built into any
structure without prior authorization.
2. Any modifications made to the sauna can waive the warranty, please get authorization before
proceeding.
3. Please maintain a minimum of 4-inch clearance on all sides of the unit to allow air to circulate while
giving access for the power cord.
Sealant Application
VERY IMPORTANT: Please follow these steps during installation as they are very
important to ensure the sauna is properly installed.
1. Prepare before the installation and use similar sealant to prevent any leaks from
happening:
5

2. Apply sealant on the sides (as shown on the images) as well as on the bottom and
top of walls.
Cleaning and Maintenance
1. Before using your sauna for the first time, clean the inside of the sauna with a clean damp cloth.
2. Make sure to always keep the sauna dry and clean.
6

3. Use a clean damp towel. DO NOT use a towel that is too wet and can drip water inside the sauna
and DO NOT use cleaning agents inside the sauna.
4. DO NOT leave towels, water glasses or bottles inside the sauna after use. Wipe the exterior
surface of the sauna with a towel and clean the glass at least once a month.
5. Place a towel on the bench to absorb any perspiration. Wash these often to maintain a clean and
pleasant environment inside your sauna.
6. Perspiration may darken the wood over time. This can be removed by a light sanding with fine grit
sandpaper.
Wood Care
If the sauna exterior body has become scratched or scuffed, it could be concealed by using a small
amount of furniture polish, oil or other furniture treatment. The interior blemishes, scratches, or
scuffs can be either left alone, sanded or a combination of gluing plus sanding. Avoid any treatment
containing benzene or a high concentration of alcohol.
Outdoor models' bodies need to be maintained on a regular basis (between 6 months to a year) by
polishing or resealing the body as needed. If the varnish is cracked or worn off, sand the surface and
re-varnish the affected area. Consult your local handyman or furniture repair professional for more
details on how to maintain the wood in an outdoor environment. You can use any outdoor exterior
clear wood sealer.
Sauna Installation Instructions
Please read the following directions carefully.
The sauna installation requires a minimum of 2 people, 5 person model sizes require at least 3 people
to install. You should not try to install the sauna on your own as damage may easily occur. Please read
the instructions thoroughly before and during assembly to ensure proper installation of the unit. If
you encounter any problems or have questions during assembly, please feel free to call our Customer
Support department at 1-888-877-2862.
Caution!
1. Install the sauna on a completely leveled surface.
7

2. Keep all liquids away from the Infrared heating panels.
3. Flammable objects and corrosive chemical substances should be kept far away from the sauna.
Your Infrared sauna will come packaged in five boxes if you choose a SLOPE roof (seven boxes for
PEAK roof saunas). Please make sure that you open the boxes FACE-UP. Please be very careful when
opening the boxes!
BOXES CONTAIN FRAGILE PARTS AND GLASS!
Please be careful when carrying and installing the glass pieces to avoid breakage.
Packaging
CONTENTS OF BOXES
1. Floor Panel.
2. Ceiling Panel
3. Accessories
4. Left Side Wall
5. Right Side Wall
6. Front Wall
7. Back Wall
8. Bench and Bench Support
9. Outdoor Roof ( SLOPE OR PEAK)
Location of Sauna & Installation Order
When determining a location for your sauna, please keep in mind the following:
1. The main power cord on the sauna must be easily accessible.
2. The location must be dry and level.
3. Panels should be installed in the following order:
8

1) Floor
2) Back Wall
3) Left Side Wall
4) Right Side Wall
5) Under Bench Support
6) Bench
7) Front Wall
8) Ceiling
9) Outdoor Roof
Connecting the Panels:
Each sauna offers two types of panel-locking systems to connect the different sides of the sauna.
Please use the instructions below as a reference guide on how to connect the sauna panels.
Inner-Locking System:
The inner-locking system is designed to be completely invisible when the sauna is installed. The locks
are built on the side of each panel and they connect by sliding one over the other (Figure G-2).
To connect two panels, follow these few steps:
9

Figure G-1: Connect panels, inner
lock system
1. Lift the panel with the male locks a few inches.
2. Push it against the opposite panel; make sure to
apply pressure around the top and bottom
corners.
3. Slide the panel down to lock it in place. Make sure
all the locks are connected (top and bottom).
4. Inspect the panels and make sure they are leveled
(the panel’s top is flat and matching).
Figure G-2: Inner-Locking System
Latch System:
The Latch Locking System is two brackets that lock together bypassing the main loop over the
opposite side and locking latch (Figure G-3).
Figure G-3: Latch Locking System
10

Where to Start:
Lay the boxes flat on the ground and open them carefully. The accessories, user manual, and smaller
parts are located in the box that includes the top and bottom panels (Figure G-4).
Figure G-4: Open the Boxes
11

ASSEMBLY INSTRUCTIONS – General Guide for:
FLOOR PANEL Placement:
Place the floor panel flat on the desired location. Make sure to leave a space around the sidewalls for
one person to stand and install the side panels (Figure C-1). You can slide the sauna once it’s complete
next to a wall.
Tips:
●Check the trim for the bench on the floor to locate the proper positioning of the floor panel.
The side where the bench is will be the back side of the sauna, where the X is shown in the
picture.
Figure A-1: Floor Panel
12

REAR PANEL Placement:
Place the rear panel on the back end of the floor panel (Figure A-2). At this point, someone should
hold the rear panel until the next connection is made.
LEFT PANEL Placement:
Install the left panel (the left panel has 2-4 sockets on the lower end) as the image below. Make sure
the top of both panels is flat and leveled.
Refer to “Connecting the Panels” section on how to lock the panels together.
Figure A-2: Rear and left panels
13

Installing the BENCH:
Slide the bench stand panel between the two vertical guides on the side panels. Connect the heaters’
plugs under the bench to the appropriate sockets. The matching plugs and sockets are labeled
alphabetically – e.g. connect “A” plug into the “A” socket.
Install the benchtop by placing it on top of the bench stand and the horizontal guide on the rear panel.
Make sure the smooth and finished side is facing up and forward (Figure A-3).
Figure A-3: Installing the Bench
14

RIGHT PANEL Placement:
Install the right panel as the image below (Figure A-4). Make sure the top of all the panels is flat and
leveled. Refer to “Connecting the Panels” section on how to lock the panels together.
Tip:
●Someone can stand inside the sauna to match the bench stand with the vertical guide on the right
panel and level the corners for easy installation. If the lower lock is not connecting, make sure the
bench stand is not blocking the panel by aligning it with the vertical guide.
Figure A-4: Right Panel
IMPORTANT:
Install the DOOR HANDLE at this point (before installing the FRONT PANEL).
15

FRONT PANEL Placement:
Connect the front panel to both side panels as in the following image on the next page (Figure A-5).
Refer to “Connecting the Panels” section (page 5) on how to lock the panels together.
Tips:
●Make sure to align the corners of the two side panels and the edges of the front panel.
●The front panel is heavy because of the glass door. At least two people are needed to lift it.
●For the inner locking system, a person can stand inside the sauna to align the edges and corners of
the panels.
●For the inner locking system, make sure to put pressure on the top and bottom corners of each
side to ensure the locks are connecting.
Figure A-5: Front Panel
16

TOP PANEL Placement:
Step 1. Raise the top panel over the sauna body. Insert the wires for the control panel, temperature
sensor, and heaters through the openings in the ceiling.
Step 2. Connect the control panel wire (white ribbon) and the heat sensor (2-pin wire) on top of the
sauna.
Step 3. Connect the heaters’ plugs into the control box. Even though the heaters’ plugs might be
labeled, they can connect into any sockets on the control box (Figure A-6).
Figure A-6: Top Panels and Connections
17

Note: Accessories installation instructions continue below the outdoor models.
If you bought an Indoor Version, the Top Panel is your Indoor Roof. Skip OUTDOOR ROOF
ASSEMBLY INSTRUCTIONS.
If you bought an Outdoor Version, please proceed with the OUTDOOR ROOF ASSEMBLY
INSTRUCTIONS.
OUTDOOR SAUNAS ASSEMBLY INSTRUCTIONS:
Installation steps start at the section “Assembly Instructions – General Guide”. Then continue
after placing the top panel.
Main Support
Place the roof bottom section on top of the sauna and screw the center support beam (Figure D-1).
The illustration below will not include the sauna’s body, but the roof should be installed on top of the
sauna.
Figure D-1: Roof bottom section and center support beam
18

Roofing Shingles Support
Install the roofing shingles support beams around the top. Each beam is labeled alphabetically to a
matching corner or side (Figure D-2, Page 25). For example, the beam marked with “A” should be
screwed into the “A” corner. Repeat for all the corners and sides (based on the model, you might have
eight or six supporting beams).
Figure D-2: Shingles Support Beams
Screw the triangular roofing shingles on the supporting beams (Figure D-3). Repeat for all sides.
Figure D-3: Roofing Shingles
19

Roof Sealing
Screw the corner roof shingles around all corners. Each corner will have two shingles curved upward
to easily identify the position of the screws (Figure D-4).
Figure D-4: Corner Roof Shingles
After screwing in the corners, flatten the curved shingles and place the pyramid roof shingles on top
(Figure D-5).
Figure D-5: Pyramid Roof Shingles
20