Moen 1225 User manual

HSILGNE
1wercSteS
2wercSteS
3toviPdnaemoD
ylbmessAreniateR
4wercSegdirtraC
5dnaretpadAeldnaH
ylbmessArotcennoC
6potStoviP
7dnatuNreniateR
ylbmessArehsaWgniraeB
8rehsaW"D"
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
ENGLISH
1
2
3
4
5
6
7
8
9
10
Set Screw
Dome and Pivot
Retainer Assembly
Cartridge Screw
Handle Adapter
Handle Connector
Pivot Stop
Washer
Retainer Nut
Wave Spring
Washer
Bearing Washer
1225 Handle Adapter Kit
English
HELPFUL TOOLS
For safety and ease of faucet
replacement, Moen recommends the
use of these helpful tools.
INS10148 - 9/12

HANDLE REPLACEMENT
IT I NOT NECE ARY TO HUT OFF WATER UPPLIE .
1. Remove plug button or cap from the handle by prying "it" upwards from the
bottom center. If a tool is required, use something which will not scratch the
handle.
2. Using the 7/64" hex key wrench, "unscrew the set screw located behind the plug
button or under the cap", turning hex key counter clockwise to remove set screw.
Lift off handle body.
3. Pull off dome. Unscrew pivot retainer counterclockwise and remove.
4. Remove cartridge screw by turning counterclockwise with a Phillips screwdriver.
5. ee exploded parts view to identify the part to be replaced.
6. Reassemble by doing steps 1-4 in reverse.
*
et crew
Adapter
Connector
Pivot top
“D” Washer
Retainer Nut
front
Find out more about home bath and faucets we have.