Entrypass N-mini User manual

ENTRYPASS TECHNICAL –WIRING GUIDE

Version: 1.03

Last Updated: 22-06-2016

EP.N-MINI WIRING GUIDE

ENTRYPASS TECHNICAL –WIRING GUIDE

Notes:

See http://www.entrypass.net/ for updates, revisions, and download the latest

installation manual

There are currently 2 version of EntryPass Platform1 Access Control System available for

different card number system

1) EntryPass Platform1 Access Control System (6 Digit Card Number System) cater for 6

digit card number installation

2) EntryPass Platform1 Access Control System (10 Digit Card Number System) cater for 10

digit card number installation

For EntryPass Platform1 Access Control System to work correctly, both control panel and

software MUST be using the same card number system

This software installation manual might be updated without prior notice

Please refer to separate EntryPass Platform1 User Manual for detail operation help. The

Official EntryPass Platform1 User Manual can be downloaded from our website under

“Download” section

ENTRYPASS TECHNICAL –WIRING GUIDE

Technical Support

If you cannot find the answer to your question in this manual or in the Help files, we recommend you

contact your system installer. Your installer is familiar with your system configuration and should be able

to answer any of your questions.

Should you need additional information, please call our Technical Support Help desk, Monday to Friday

9:00 AM to 6:00 PM (GMT +8:00)

Method Details

Phone + 60 (3) - 8068 1929

Fax + 60 (3) - 8068 1922

Internet www.entrypass.net

Email support@entrypass.net

BEFORE YOU BEGIN

ENTRYPASS TECHNICAL –WIRING GUIDE

CAUTION

Battery may explode if mistreated. Do not recharge,

disassemble or dispose of in fire. To prevent a risk of explosion do

not pry the battery out with a metal or conductive tool.

Preparing Your EntryPass Controllers

EntryPass controller contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Thus, prior to installation, please follow the instruction

below:

•Observe precautions while handling the circuit board assembly by using proper grounding straps and handling

precautions at all

•Visually ensure no onboard parts is broken, damage or contains burn mark

•Do not turn on the power supply until you completed all wiring and external add on devices installations

Instances of Non-Warranty

•Damage due to natural disaster, accident or human cause.

•Damage as a result of violating the conditions recommended in the user manual

•Damage due to improper installation

•Damage due to use of uncertified components

•Damage due to use exceeding the permitted parameters

Considerations Prior to Installation

ENTRYPASS TECHNICAL –WIRING GUIDE

N-MINI Reader

Keypad Display Unit

Networked Lock Control

N-MINI Description

ENTRYPASS TECHNICAL –WIRING GUIDE

N-MINI Reader Color Description

Red : +12VDC

Black : GND / 0VDC

Pink : Not In Used

Black : GND / 0VDC

Blue : Not In Used

Brown : Not In Used

White : Exit Reader D1

Green : Exit Reader DO

Orange : Not In Used

Yellow : Not In Used

Grey : Not In Used

Purple : Not In Used

Green : RS232 RX Separated

White : RS232 TX Separated

N-MINI Reader Color Description

ENTRYPASS TECHNICAL –WIRING GUIDE

Networked Lock Control (NLC) Color Description

Networked Lock Control (NLC) Color

Description

Red / Yellow : +12VDC

Black : GND / 0VDC

Orange : Door Sensor

Yellow : Not In Used

Blue : Not In Used

Pink : Push Button

Red : +12VDC

Black : GND / 0VDC

Grey / Yellow : NO1

White / Blue : CM1

White : NC1

Brown : NO2

Grey : CM2

Green : NC2

Purple : +12Vdc Lock

Green : RS232 TX Separated

White : RS232 RX Separated

ENTRYPASS TECHNICAL –WIRING GUIDE

White LCD Display

Enter Key

Numbered Keypad

Navigation Pad

LED Indicator

N-MINI Reader Keypad Display Unit

ENTRYPASS TECHNICAL –WIRING GUIDE

Backup Battery

8-Bits Dip Switch

Buzzer

Lock Relay

Wire Connector RJ-45 Network Port

Auxiliary Input

Auxiliary Communication Port

32-Bits Processor

Power LED

Reset Button Cold Start Button

Heart Beat LED

Communication LED

RJ-45 LED

Networked Lock Control (NLC)

ENTRYPASS TECHNICAL –WIRING GUIDE

ENTRYPASS

Power Supply Unit Specification:

•Switching Power Supply

•12V DC

•3 Amp (MINImum)

Power Supply Unit Specification

ENTRYPASS TECHNICAL –WIRING GUIDE

The distance from N-MINI keypad reader to NLC should not more than 30 meter

0 V +12 VDC

Green (RS 232)

White (RS 232)

Red (+12VDC)

Black (Gnd)

Green (RS 232)

White (RS 232)

Black (Gnd)

Red (12+VDC)

ENTRYPASS

Switching Mode

Power Supply Unit

(12V DC, 3A Minimum)

Connecting the N-MINI Reader to NLC

ENTRYPASS TECHNICAL –WIRING GUIDE

Diode(1N4002) must be installed at the locking devices in order to protect against back EMF

White/Blue (CM1)

White (NC1)

Emergency

Breakglass

Emergency

Keyswitch

Electro-Magnetic Lock

ENTRYPASS

Purple (+12VDC)

Switching Mode

Power Supply Unit

(12V DC, 3A Minimum)

Connecting the Lock (NC), Breakglass and Keyswitch to NLC

ENTRYPASS TECHNICAL –WIRING GUIDE

Grey (CM2)

Purple (+12VDC)

Electro-Magnetic Lock

ENTRYPASS

Purple (+12VDC)

Green (NC2)

Switching Mode

Power Supply Unit

(12V DC, 3A Minimum)

When the implementation is on double leaf type, it is advisable to use the second relay to control

another lock in order to reduce the NLC onboard relay load

Note:

To enable the relay 2 function, on

the N-MINI keypad reader, press:

•F1

•123456

•01 Enter

•07 Enter

•1 Enter

•ESC x3

Connecting the 2nd Lock (NC) for Double Leaf Type

(Optional)

ENTRYPASS TECHNICAL –WIRING GUIDE

White/Blue (CM1)

Grey/Yellow (NO1)

Electro-Magnetic Lock (Drop Bolt)

ENTRYPASS

Purple (+12VDC)

Switching Mode

Power Supply Unit

(12V DC, 3A Minimum)

Diode(1N4002) must be installed at the locking devices in order to protect against back EMF

Connecting the Lock (NO), Breakglass and Keyswitch to NLC

ENTRYPASS TECHNICAL –WIRING GUIDE

Note:

To enable the relay 2 function, on

the N-MINI keypad reader, press:

•F1

•123456

•01 Enter

•07 Enter

•1 Enter

•ESC x3

Grey (CM2)

Purple (+12VDC)

Electro-Magnetic Lock (Drop Bolt)

ENTRYPASS

Purple (+12VDC)

Brown (NO2)

Switching Mode

Power Supply Unit

(12V DC, 3A Minimum)

Connecting the 2nd Lock (NO) for Double Leaf Type

(Optional)

When the implementation is on double leaf type, it is advisable to use the second relay to control

another lock in order to reduce the NLC onboard relay load

ENTRYPASS TECHNICAL –WIRING GUIDE

The distance from NLC to push button and door sensor should not more than 30 meter

Door Sensor Push Button

Orange (Door Sensor)

Pink (Push Button)

Black (Gnd)

ENTRYPASS

Connecting the Door Sensor and Push Button

ENTRYPASS TECHNICAL –WIRING GUIDE

To configure MINI as a

READER Mode, press:

•F1

•123456

•01 Enter

•05 Enter

•1 Enter

•ESC x3

To configure N-MINI as

aREADER Mode, press:

•F1

•123456

•01 Enter

•04 Enter

•1 Enter

•ESC x3

0 V +12 VDC

Exit Reader

Switching Mode

Power Supply Unit

(12V DC, 3A Minimum)

Green (D0)

White (D1)

Black (Gnd)

Red (+12VDC)

Black (Gnd)

Red (+12VDC)

Orange (RCLK)

Yellow (RDAT)

Connecting the Exit Reader –MINI/N-MINI Reader as an Exit

Reader

To use MINI/N-MINI on exit reader side, you must enable the READER MODE function on the programming

mode

ENTRYPASS TECHNICAL –WIRING GUIDE

0 V +12 VDC

Green (D0)

White (D1)

Black (Gnd)

Red (+12VDC)

Green (D0)

White (D1)

Exit Reader

Black (Gnd)

Red (+12VDC)

Switching Mode

Power Supply Unit

(12V DC, 3A Minimum)

The distance from MINI to exit reader should not more than 10 meter

Connecting the Exit reader –3rd Party Reader

ENTRYPASS TECHNICAL –WIRING GUIDE

The distance from NLC to network switch should not more than 100 meter

Cat-5 Cat-5

Network Switch

ENTRYPASS

EntryPass Platform1 Access

Control System

Connecting to the PC via Network

ENTRYPASS TECHNICAL –WIRING GUIDE

0 V +12 VDC

Red/Yellow (+12VDC)

Black (Gnd)

ENTRYPASS

Switching Mode

Power Supply Unit

(12V DC, 3A Minimum)

Connecting to Power Supply Unit

ENTRYPASS N-MINI User manual

Popular Ebook Reader manuals by other brands