4Set up Wi-Fi Network
Since many features require a Wi-Fi connection, we recommend you set up
your Wi-Fi network now.
Select Settings from the Application Quick Launch Bar, tap Network.
Turn Wi-Fi on by tapping the Wi-Fi is off/Turn on Wi-Fi.
The device automatically scans and list all local Wi-Fi Networks found.
A indicates secure networks that require login name/password to
connect.
Tap the desired network to which you want to connect, enter the
Network Password if applicable.
Tap to close the Settings screen.
If your Wi-Fi network is set as hidden, it won’t be found by the auto
scan. Tap Other and then enter the network name and key,
tap
Save.
(Advanced): After saving the Wi-Fi network, you can change your
network settings by selecting Manual Setup, and then follow the
prompts.
The Wi-Fi icon on the top of screens indicates the status as follows:
= Connected = Not connected, Wi-Fi turned ON
= Not connected and Wi-Fi turned OFF (power saver)
When the device goes into sleep mode, the Wi-Fi disconnects from
the local network, but will automatically reconnect when out of sleep
mode (may take up to 30 seconds to reconnect).
Connecting to Public Wi-Fi Hotspot
If you are connecting via a public Wi-Fi hotspot, it may be necessary to
immediately launch the browser and provide the hotspot login
information prior to having an active internet connection.
Follow steps 1-6 above to select the hotspot Wi-Fi network.
Select Web from the Application Quick Launch Bar.
Enter the login information as required by the hotspot.
