Enviro WD60 User manual

Ii
EnVlfo
.
Water Dispenser
Instruction Manual
Model No: WD60
IE~ro ... I
=

PART NAME
CD
~~~--@
===~==:= tr---®
®
i===~r-@)
l1==~--®
@
'--tt---@
====~~~~~--®
('j)
(FRONT) (REAR)
NO.
PART NAME NO. PART NAME
1
Bottle Supporter
8
Paper Cup Cabinet
2
Top Cover
9
Cooling Switch
3
Indicator Light
, 10
Heating Switch
4
Cold Water Tap
11
Power Cord
5
Hot Water Tap
12
Drain Hole
6 Water Collector 13
Condenser
7
Refrigerator
( NOTES: )
This machine is suitable for bottle of 3 or 5 gallons. Don't use unhealthy hard
water.
This machine should work under environment of temperature from 1 0'C-38'C,
relative humidity not higher than 90%.
Ice Block: please clear the ice block first
If this machine worked under environment of temperature below O'C or the
thermostat did not work, the water will become ice in the cold water tank
and block the pipe.
(FUNCTION INTRODUCTION)
1. This model dispenser can satisfy the need of making tea & coffee and
making cold drink. It's suitable for the use at home and in public.
2. With adoption of distinctive thermal isolation technology, this machine
can minimize thermal exchange between hot & cold water.
3. The machine adopts unique paper cup convenient (patent design) and
latest single tap design.
4. The machine has a convenient refrigerator(16L),whose temperature from O'Cto 1 O'C.
-1-

(OPERATION INSTRUCTION)
.J
1. Tear the label from the bottle.
2. Vertically insert the bottle into the bottle supporter on top of the machine.
Don't plug the power cord or turn on the red switch until 3 minutes after
you putting the filled water bottle.
3. Insert the plug to socket, then turn on the power switch. The indicator light up
accordingly once the machine works. The light will be automatically put out
when the water reach the rated temperature.
4.Vertically pullout the bottle by two hands when the bottle
is empty, then replace it with another bottle of water.
5.The latest single tap can be more fitted for consumer s
taste, you can freely control the water temperature by
pressing the two taps at one time.
6.Use the paper cup container:
OPERATION:
Standard Paper Cup: 9 Ounce Tuck The Paper Cup Into
The Inside hole Upwards. Slightly Turn The Paper Cup
Downwards And Take It Away.
(CAUTION)
1.Keep this machine in a dry and cool place and avoiding
direct sunshine. Rearward of the machine should be at
least 20 cm far from the wall. Never put the machine on
the paper or foam, which may cause unstable condition,
such as store water or cause creepage. Never put
anything flammable beside this machine.
2.To avoid damage to the machine, don' t plug the power
cord or turn on the heating switch(red)until water runsout
from the tap of hot water.
3.1n case hot(or cold)water is not needed for a long time,
turn off the switch For savi ng power.
4.This water dispenser must be used with third-prong
grounding plug and creepage protection switch. If use two
flat plug, the grounding wire must be properly grounded
before use.
5.ln case not to use this machine for a long time, turn off the
switch, then pull the plug out from socket and drain the
remaining water through drain hole.
-2-

6. Never use organic liquid to clean the machine. Strictly LLJ
prohibit splashing water to the body. 9
7. You should use the ON/Off switch to turn on or off the
machine. It Is prohibited that turn 00 or off the machine l~~a J
through plugging or unplugging the power cord. Never
extend the length of the power supply cord to avoid fire.
8. For this model dispenser(with compressor), never
turn the machine upside down or lean it more than [X ~ J
9. :~~c~ this model dispenser thermostat has been V ~r
adjusted. Please do not adjust it by yourself. [IJ
10.This machine should not be turned on until3 minutes later
when turning off the cooling switch(blue button). X
11. The power cord or other parts must be replaced by
professional person when Itis damaged. [I\D 8 J
12.Refrigerator: KEEP THE REFRIGERATOR DOOR CLOSED.
Otherwise the machine will be continuously at working state, which
will make ice block in cold water tank and pipe or make the
compressor malfunction.
13.We reserved the right of interpreting this instruction manual.
(CLEANING)
To avoid accident, cut off the power supply before operation according to the
following instruction.
1. The machine had been disinfected before shipping from factory. Before
using this machine, clean the machine by push the hot water tap and cold
water tap, let about 1 litter water flow out.
2. The machine should be disinfected with the disinfectant available from
drugstore or market place according to the instruction manual of the
disinfectant, and then clean it with water.
3.Have the bottle supporter, water tank & heating element cleaned by expert
about every year. It will keep the machine in good condition and extend its
life. Never disassemble this machine by yourself to avoid damaging the
machine.
4. Draining instruction: open the taps, and take away the cap & rubber stopper
from the water outlet on the rear side of machine.
5. Use any neutral & none friction cloth to wash the surface of the machine.
6. Sponge: Frequently wash and dry the defrosting sponge to keep the refrigerator
clean.
-3-

CIRCUIT
E~
..JL SW2
-h
W1
-
19 19
<J) <J)
o 0
E E
Q) 1ii
'" '"
I- I-
N_-----'----'---'-------L-/
Temp control 2
Note:all the data is subject to change without notice.
(TECH.DATA: )
WATT FLOW CAPACITY N.W.lG.W. PACKING
MODEL SUPPLY SPECFICATION (kg) (LxWxH)mm
HOT COLD HOT COLD
WD60 230V-/50Hz 420W 150W 5.0Uh 1.0Uh Compressor 16.8/18.6 375x365x998
;:'90"C :S;10"C cooling
(TROUBLE SHOOTING)
Please check the following before have the machine repaired.
PROBLEMS POSSIBLE CAUSES ELIMINATION
No hot or cold 1.0ver consumption of hot 1.Just wait a moment, then hot
water or cold water in short time. or cold water is available
2.No power supply. again.
2. Connect plug to socket, turn
on heating or cooling switch.
No water running 1.Empty bottle. 1.Replace it with another
out from taps bottle.
2.lnlet of bottle supporter 2.Clean out wasted paper &
blocked by bottle seal. bottle seal, install bottle again.
Leakage from Broken bottle Replace it with a new bottle.
bottle supporter
Noisy operation Not placid installation Place the machine on placid &
solid surface.
-4-