WHAT FEATURES DOES MY MR VENTY UNIT HAVE?
All models
The intelligent low temperature comfort heater* is designed to temper the air during periods of low
external temperatures. It is capable of holding incoming air temperatures accurately at 10°C. With the
function enabled, the heater may be on 10% of the time, depending on the fan speed setting and only
at loft temperatures at or below 10°C.
All units have an automatic increased airow setting. This function increases airow rates per setting
by 10% to deliver additional air into the property at temperatures above 19°C.
*Heater may be omitted on request by the customer.
WHAT FEATURES DOES MY MR VENTY UNIT HAVE?
ECO2Air and ECO2Air Twin models
Your unit is tted with an automatic summer by-pass as standard. This switches the unit’s airow from
the loft source to an atmospheric source when the temperature in the loft reaches 25°C. This is to avoid
hot air being delivered into the property and maintains the correct level of ventilation at all times.
MAINTENANCE
The Mr Venty units have been subjected to rigorous testing and are constructed from durable materials.
There should be no requirement for any maintenance within the ve year period.
ECO2Loft, ECO2Twin
At the ve year service, the loft lter located on the unit must be replaced to ensure maximum eciency
of the unit. The lter is mounted around the unit with velcro, simply pull o and replace.
ECO2Air, ECO2Air Twin
At the ve year service, the loft lter located on the unit and the inline air source lter, located at the
supply from atmosphere must be replaced to ensure maximum eciency of the unit. The lter located
on top of the unit is mounted with velcro, simply pull o and replace. The inline lter in the duct is
located immediately before the unit. Release the duct and replace the cone lter. The duct must be
reconnected and resealed.
Work to be carried out by a technically competent person to ensure safety and that the product
continues to run eciently. When carrying work out to this unit it should be isolated from the main
power supply at the fuse spur.
ECO2Loftight, ECO2Loftight Twin
At the ve year service, the inline air source lter, located at the supply from atmosphere must be
replaced to ensure maximum eciency of the unit. The lter in the duct is located immediately before
the unit. Release the duct and replace the cone lter. The duct must be reconnected and resealed.
Work to be carried out by a technically competent person to ensure safety and that the product
continues to run eciently. When carrying work out to this unit it should be isolated from the main
power supply at the fuse spur.