Epcom TT312VW User manual

TT312VW

·IMPORTANT SAFETY INSTRUCTIONS
Please read below safety instructions carefully before installation and
operation:
1. Please pay attention to all the warnings and hints on this device.
2. Do not expose this unit to rain, moisture and liquid.
3. Do not hot plug when it is working.
4. Use DC12V power supply only. Make sure specification
matched if using adapters not supplied by factory.
·INTRODUCTION
This video wall controller is a perfect solution for 1x2 large video wall,
supports 1xHDMI source input and 2xHDMI outputs to two monitors.
It supports?HDCP-compliant?HDMI signal?source up?to?full?HD?
1080p@60Hz.?It s ideal for video wall display applications in clubs,
exhibitions, building lobbies and other similar venues.
·FEATURES
1. With 2 HDMI outputs,divides the input video into two parts
and extend to two same size displays.
2. Resolution supported is up to 1080p@60Hz.
3. Support video wall screen mode and clone screen mode.
4. With 3.5mm audio output port, access to audio equipment easily.
5. Wall-mountable design, easy for installation.
6. Switch output modes with mode button.
7. Plug and play.

·PACKAGE CONTENTS
video wall controller power adapter 3.5mm jack audio
unit ×1pcs （12V2A）×1pcs cables ×1pcs
user manual ×1pcs Wall-mount kit x2pcs Screws*4pcs
·INSTALLATION REQUIREMENTS
1. Source device:
Source device with HDMI output, such as set-top boxes, computers,
video recorders,etc.
2. Display device:
Display device with HDMI input, such as television, projector,
HD display,etc.
3. Cable:
HDMI cables
·PANEL DESCRIPTION
1. Front panel：

2. Back panel：

·CONNECTION AND OPERATION
1. Connection
2. Connection instruction
1 ) Connect the HDMI output port on the video source device to the
HDMI input port on the video wall controller via HDMI cable.
2 ) Connect the audio output port to an audio player through an
audio cable.
3 ) Connect power supplies of all devices, and video wall
controller works.
3. Display Modes
Video Wall Screen Mode Clone Screen Mode

·FAQ
Q: TV displays with black borders around the edge:
A:1 ) Adjust the display ratio with the mode switch button;
2 ) Set TV to full screen mode(full pixel display).
Q: the TV shows "No signal"
A:1 ) Please check whether there is a HDMI signal input;
2 ) Try to replace high quality or shorter HDMI cables
3 ) Try to reduce the resolution of signal source.
·SPECIFICATION

Disclaimer
The product name and brand name may be registered trademark of
related manufactures. ? and ? may be omitted on the user manual.
The pictures in this user manual are just for reference. The terms HDMI,
HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
We reserve the rights to make changes without further notice to a product
or system described herein to improve reliability, function or design.