Epcom XLL106 Series User manual

Installation Manual
Warning Light for Interior
XLL106 Series

Introduction
The Warning Light for Interior Series XLL106 offers High power
LEDs Gen III (Generation III) as light sources with a compact build
convenient operation and several flash patterns.
With its novel design, its characteristics are high
lumens, low power consumption, easy installation and a
long life span.
The equipment is specially designed to be installed in any
kind of emergency vehicle
Note: Please read the manual before installing the product
Technical Data
•Operating Voltage: 12 Vcd
•Consumption: 2 A max
•Flash patterns: 22
•Mounting: Suction
•Dimensions: 11.5 cm X 4. 8 cm X 2.6 cm
Installation and Operation
•Equipment is designed for use in interior
•Maintain the mounting area ventilated
•Use suction support to adjust the equipments position
•To power the equipment use the vehicles lighter adapter
NOTE
IMPORTANT Please read the instructions before installing
the equipment
WARNING You must be careful when positioning this equipment, for
that the light and/ or cable do not interfere with the proper functioning
of the airbag of both the driver and the passenger. Not giving
attention to this warning can cause serious or fatal injuries
High intensity equipment. Do not look directly while the
device is on. May cause momentary blindness and/or
permanent eye damage.