Patriot Lighting TT0034 User manual

Page 1 of 3
347-2356
TT0034
LED MAGNIFIER LAMP
G
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-887-6326
Monday – Friday 9:00 a.m. – 5:00 p.m. CST
PACKAGE CONTENTS
A
C
D
E
F
B
Adapter
x1
G
E
Clamp set
x1

ASSEMBLY INSTRUCTIONS
Page 2 of 3
6.Magnifier lens change
(3X/5X lens):
●Turn off the light or unplug
the adapter to cool down
before replacing the
magnifier lens.
● Unlock the plastic lampshade (B)
and take the magnifier lens(A) out.
●Put the new magnifier lens into lamphead and lock it.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
CAUTION
●Do not touch hot lens, guard, or enclosure.
●Keep lamp away from materials that may burn.
●Never tilt backwards.
●Do not use in wet locations, use indoors only.
●LED light output is strong enough to cause eye damage. Avoid staring directly at the LED light source
for prolonged periods of time.
Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with
package contents list and diagram on previous page. If any part is missing or damaged, do not attempt to assemble,
install or operate the product.
Warning:Please do not put the magnifier
lens(A) under the sunlight directly.
1. Lock the clamp set (E)
on the location you need
by rotating the locking
screw.
3.Adjust the lamphead
direction you need and
tighten the cross knob
(D).
4.
Connect the adapter (G)
with the cable (F), and
then put the adapter into
the electrical outlet.
E
PREPARATION
D
F
G
B
A
C
5. Touch switch to control the
brightness and color
temperature:
Touch the "M" button (C) ,
turn on the light.
1 touch: turn on, weak white
light
2 touch: middle white light
3 touch: higher white light
4 touch:turn off
Long press for 2 seconds: white light change to yellow
light.
1 touch: weak yellow light
2 touch: middle yellow light
3 touch: higher yellow light
4 touch: turn off with memory function. When you turn
on the lamp again, it keeps the same color temperature
you turned off.
2
3
4
5
6
2.Put the lamp into clamp
set and fix the lamp with
the set screw. Set Screw
1
Locking Screw

The following parts are available for re-order if damaged or missing. Call us toll-free at 1-800-887-6326.
Page 3 of 3
6073CC
5110A
1) If the light does not work:
a) Make sure the rotary switch and circuit breaker are on.
2) Fuse blows or circuit trips when light is turned on.
a) Check for crossed wires, ensure wiring is correct.
If unable to fix any of the above issues, please consult a certified electrician.
TROUBLESHOOTING
CARE AND MAINTENANCE
●To clean, turn off and wipe with a damp, non-abrasive cloth.
●Do not alter the plug.
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-887-6326
Monday – Friday 9:00 a.m. – 5:00 p.m. CSTT
R
FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails due
to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this lighting
R
fixture with the original sales receipt back to your nearest MENARDS retail store. At its discretion, PATRIOT
R
LIGHTING agrees to have the product or any defective part(s) repaired or replaced with the same or similar PATRIOT
R
LIGHTING product or part free of charge, within the stated warranty period, when returned by the original purchaser
with original sales receipt. This warranty; (1) excludes expendable parts including but not limited to light bulbs; (2) does
not cover damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to
persons/property or costs. This warranty does give you specific legal rights and you may have other rights, which vary
from state to state.
Spare Parts List:
Adapter
x1
G
E
Clamp set
x1