EpiValley 8380 User manual

1
EpiValley 8380

2
Table of Contents
Product Features ..................................................................................................................................................................... 3
Technical Specifications........................................................................................................................................................ 3
System Requirements............................................................................................................................................................ 4
Installation Procedure........................................................................................................................................................... 4
Installation in Windows XP ........................................................................................................................................ 5
Start Installation............................................................................................................................................................. 5
USB Driver Installation................................................................................................................................................ 7
Un-installing Procedure .............................................................................................................................................. 8
Launch Access Manager ............................................................................................................................................10
Activation Procedure..................................................................................................................................................11
Setting Up Internet Connection..............................................................................................................................12
Settings And Information .........................................................................................................................................13
Installation in Mac OS ..................................................................................................................................................18
Installation Procedure ...............................................................................................................................................18
Un-installing Procedure ............................................................................................................................................19
Access Manager Installing Guide...........................................................................................................................20
Launch Access Manager ............................................................................................................................................23
Setting Up Internet Connection..............................................................................................................................24
Network Settings..........................................................................................................................................................24
Installation in Linux .....................................................................................................................................................26
Installation Procedure ...............................................................................................................................................26
Configuration Of The Internet Connection on Text Interface....................................................................27
Configuration Of The Internet Connection On Graphic Interface ............................................................30
FAQ ..............................................................................................................................................................................................37

3
P
PR RO OD DU UC CT T F FE EA AT TU UR RE ES S
New Sleek Slim and Stylish design with a internal antenna.
Supports Windows 2000, XP, Vista32/64 and Windows 7.
Supports Mac OS version
Supports selected version of LINUX OS
Complete PNP functionality support on Windows OS.
Support the PC-Voice functionality and Ear-Jack* (Presently the voice functionality is
limited to the *228 activation process)
Supports SHDR functionality for improved throughputs
Supports Hybrid mode of operation between CDMA 1x and HSIA
Supports Standard USB 2.0 interface (High Speed)
T
TE EC CH HN NI IC CA AL L S SP PE EC CI IF FI IC CA AT TI IO ON NS S

4
S
SY YS ST TE EM M R RE EQ QU UI IR RE EM ME EN NT TS S
The Photon+ Modem supports an complete Plug and Play feature for the automatic
installation of USB drivers and PC-Client tool (Access Manager) on
Windows
oWindows® 2000, Windows® XP32/64, Windows® Vista 32 / 64, and
Windows® 7 32/64 bit Operating Systems
oSupports standard USB 1.1 ( USB 2.0 Compatible )
o100Mb free hard disk space or above
o128Mb RAM or above
MAC
oMac OS X Leopard(10.5) and Snow Leopard(10.6) version
oSupports standard USB 1.1 ( USB 2.0 Compatible )
o10Mb free hard disk space or above
Linux
The following the version of Linux is supported.
oRedhat Enterprise Linux 3 & above
oFedora Core 5,6 & above (Except 11)
oSUSE Desktop Linux 9,10 & above
oDebian Linux 5,6 & above
oUbuntu Linux 7 & above
oSupports standard USB 1.1 ( USB 2.0 Compatible )
o10Mb free hard disk space or above
I
IN NS ST TA AL LL LA AT TI IO ON N P PR RO OC CE ED DU UR RE E
•The SEC 8380 Photon+ Device supports an complete Plug and Play feature for the
automatic installation of USB drivers and PC-Client tool (Access Manager) on Windows
® 2000, Windows® Vista 32 / 64 and Windows® 7
•After plugging the SEC 8380 Photo+ Modem on your computer, it will mount a CD
Drive, and will execute a Autorun.exe file which will guide you to a Dialer Setup wizard
Program.
•If the dialer is already installed on your Computer the program will auto detect and just
run the Access Manager program

5
Installation in Windows XP
•Insert the Wireless Modem Photon+ into a USB port of your computer. The installer will
initiate in about 1 minute and start loading the installation files.
Remember : Autorun.exe program of the Photon + CD installer could be disabled on some
computers due to local IT policies. Contact your system administrator in this case.
•If the Autorun feature on Windows is disabled on your computer, you can install it
manually.
•Follow the steps below for the first time installation
1. Open Windows Explorer or My Computer, and the Virtual CD Drive ‘Photon+’
appears.
2. Click Virtual CD Drive ‘Photon+’.
3. Execute ‘Autorun.exe’ program for starting the installation by double clicking it.
Start Installation
When the Device is plugged in the Laptop / Desktop, a welcome Splash Screen will be
displayed and the Installer will initialize and display ‘Welcome to the TATA Photon+ Setup
Wizard’
1. Click ‘Next’ button in order to proceed.

6
2. Default Installation directory is ‘C:\Program Files\TATA\Photon+\EpiValley’.You
can change it to the desired directory location by Pressing the ‘Browse…’ button. It
is recommended to install the program in the default installation directory.
Click ‘Install’ button to continue the installation.
3. The Installation process will continue and once completed you will find a dialogue
box as shown below which will indicate the completion of the Dialer (Access
manager) Installation Process.

7
When the installation is completed, click ‘Finish’.
USB Driver Installation
•After installing the Photon+ Access manager Dialer, the Wireless Modem will be
automatically recognized as a modem, and not a CD Drive. This process will be
completely automated and once the installation process is completed “Your new
hardware is installed and ready to use” will be displayed.
•The Access manager will be launched automatically.
IMPORTANT NOTE
•DO NOT unplug the Wireless Modem during the USB driver installation.
•DO NOT move the Access Manager launched automatically during the USB driver
installation.
•DO NOT restart the computer during the USB driver installation.

8
※If the USB deriver is not properly installed, Re-run the installation process after
completing the steps mentioned in the “3. Uninstalling Guide”.
Un-installing Procedure
Please note that the Access Manager cannot be Completely Uninstalled while it is running
either on the desktop or in the system tray.
IMPORTANT NOTE
•Please UNPLUG your Wireless Modem before uninstalling.
•Before uninstalling the Access Manager, please CLOSE the Access Manager on the
desktop and also from the system tray.
(You will see a ‘Photon+ Access Manager’ icon at the bottom right of your desktop screen.)
Procedure I
•To Un-install the Access manager you have to close the application from the desktop
as well as from the system tray.
•Exit the Access Manager from the system tray as shown below:
•Select ‘Exit’ on Tray Menu, Click ‘Yes’ button.
Procedure II
Program can be uninstalled by accessing the Start menu.
Open START menu _Programs _ TATA Photon+ _ Epivalley _ Click Uninstall
Or
Open START menu _ Control Panel _ Add Remove Programs _ Change or Remove
Programs _ Click TATA Photon+.
You will see the Screen as shown below:

9
Click ‘Yes’ button to continue..
•Click ‘YES’ if you want to remove the Modem Driver Access manager along with the
USB
Modem Drivers.
•Click ‘NO’ to just remove the Photon+ Access Manager application only.
Remember Uninstalling the Modem drivers requires restarting the computer.
•Click ‘YES’ to complete, and your computer will restart.
•Click ‘NO’ to complete, but its recommended that you restart your system .

10
•If USB Modem device unplugged during uninstallation process, Below message will
pop up.
Note : Your Device should be unplugged
Launch Access Manager
Running Access Manager
•Plug the Wireless Modem in a USB port, and Access Manager will run automatically
on Windows OS. Otherwise you need to double click ‘Photon+’( )
icon on your desktop or select ‘Start All Program TATA Photon+ EpiValley
Photon+ dialer’.
•After initialization, the main window of application will be displayed on the screen
as shown below. The main window has six Menus with specific functions.

11
Status Information
•The below table lists the status information on the Access Manager.
Activation Procedure
If you see the following dialogue on the Access Manager, you should activate the wireless modem as
per Instructions from Service Provider by PC Voice.

12
IMPORTANT NOTE
•Please Turn ON your PC / Laptop speaker before you dial the activation call to hear the
voice instruction.
•If your Laptop/ Desktop Speakers are not functioning, Please use the ear jack provided on
the device, by connecting Earphones.
1. Click ‘Yes’ button, to continue the activation call. You will hear the activation IVR, which will
guide you through the rest of the process.
2. ‘PIN Code Dialog’ will pop-up and prompt for entering a 14 digit PIN code. Input the correct
PIN Code following the instructions received from the IVR.
3. The activating procedure is successful, ‘Programming Successful..’ message will be
displayed.
Note: For any Error codes encountered while activation process, please contact the Service
Provider for further information.
Setting up Internet Connection
Click “Setting” icon -> Click “Network” tab

13
Editing Profile Settings
While installing the Wireless Modem the Internet connection profile is created automatically.
To Add / Edit / Delete a profile, click on the profile settings tab-
Default profile name: TATA.
Number: #777.
User name: internet
Password: internet.
IMPORTANT NOTE
This is default Profile, cannot be deleted or modified by the user.
Internet Connection
Click the Connect button ( ) flashing on the Access Manager to establish the connection.
1. Click ‘Connect’ icon to display the Internet connection profile details.
2. Select the Internet connection profile “TATA”(Default Profile)
There is a default profile to connect to the TATA Indicom web page. Click the below logo at the
bottom right of the Access Manager 
Settings And Information
Click “Settings” Icon
Display the Statistic information
1. Click ‘Log’ Icon.
2. Display for the log statistics through service operator’s website.
3. It provides information on the Internet usages such as Date, Duration, Rx, Tx total
bytes.
General Settings
Select ‘Setting’ Icon Click ‘General’ tab.

14
Lock Settings
Select ‘Settings’ Icon Click ‘Lock’ tab
The default lock value is four zero “0000”.
For changing the lock value, follow the steps mentioned under ‘Change Lock Code’ setup
- This configuration is only for PC Client
Network Settings
Select ‘Settings’ Icon Click ‘Network’ tab
You can change the mode of preference as ‘Hybrid Mode’, ‘1xOnly’ and ‘HSIA Only’.

15
IMPORTANT NOTE
It is recommendable that you do not change the default mode of preference.
Information
Select ‘Setting’ Icon Click ‘Information’ tab
The information tab displays the following items:
1) Application Version Information.
2) PRL ID information
3) Wireless Modem information as Model name, F/W version, H/W version, MEID and
pESN.
Help & Option Tab
Click Help menu ( )at the top right side on the main window of the Access
Manager.
Click Option menu ( ) at the top right side on the main window of the Access
Manager.
To Test Photon+ Device Click on the Test PHOTON+ Device, welcome to the device test
wizard will pop up.

16
Check Create Report if you would like to create a report of the test, And click Next.
The PHOTON+ Device Test process will start and will display the progress of the tests. Once
the Test process is complete, Click Next on the Test PHOTON+ Device to get the results of
the test.

17
If you want to view the device test result, select View Test result and click finish to view the
test result.
If you want to restart USB modem, select Restart USB modem and click finish to restart the
modem.
To Reset All Settings to Defaults
If you want to reset all the custom settings to default, click on Reset All Settings to Defaults.
Click ‘Yes’ if you want to reset all Settings to default.
The dialer will prompt for password
Enter the password as ‘5298’ and click ‘OK’.

18
Installation in Mac OS
The Wireless Modem does not support the automatic installation function on Mac operating
system. You need to install it manually following the recommended steps.
Installation Procedure
Insert the Wireless Modem into a USB port on your Mac computer. You may see the Photon+ CD
Driver on the Desktop.
Start the Setup
1) Double click the Photon+ CD Driver on the Desktop.
2) You may see the following Installation packages.
NOTE:
First of all, you have to install the ‘USB Modem Driver’ installer package, and then need to install
the ‘Installer_Photon+’ package.
USB Driver Installation
Double click the ‘USB Modem Driver’ installer package.

19
1) Click the ‘Install’ button in order to proceed.
2) Click the ‘OK’ button.
3) Input your ‘Password’ when prompted, and click the ‘OK’ button.
4) Click the ‘Restart’ button in order to add the system file.
Un-installing Procedure

20
Double click the ‘USB Modem Driver’ uninstaller package.
1) Click the ‘Uninstall’ button in order to proceed.
2) Click the ‘OK’ button.
3) Input your ‘Password’ when prompted, and click the ‘OK’ button.
4) Click the ‘OK’ button in order to complete the uninstallation proceeds.
Access Manager Installing Guide
1) Double click the ‘Photon+ Access Manager’ installer package.