ePropulsion SPIRIT 1.0R User manual

SPIRIT 1.0R USER MANUAL
March, 2018 Version 1.1
Copyright © 2018 ePropulsion All Rights Reserved

1
Acknowledgement
Thanks for choosing ePropulsioin products, your trust and support in our
company are sincerely appreciated. We are dedicated to providing high-
performance electric outboard motors, sup/kayak motors, reliable lithium
batteries and accessories.
Welcome to visit www.epropulsion.com and contact us if you have any
concerns.
Using this manual
Before using this product, please read this user manual fully to understand
the correct and safe operations. By using this product, you hereby agree
that you have fully understood and accepted all the contents of this manual.
ePropulsion accepts no liability for any damage or injury caused by operations
that contradict this manual.
Due to ongoing optimization of our products, ePropulsion reserves the rights
of constantly adjusting the contents described in the manual. ePropulsion also
reserves the intellectual property rights and industrial property rights including
copyrights, patents, logos and designs, etc.
This manual is subject to update without prior notice. Please visit our website
www.epropulsion.com for the latest version. If you find any discrepancy
between your products and this manual, or should you have any doubts
concerning the product or the manual, please visit www.epropulsion.com.
ePropulsion reserves the right of nal interpretation of this manual.
This manual is multilingual, in case of any discrepancy in interpretation of
different language versions, the English version shall prevail.
Symbols
The following symbols will help you acquire some key information.
Useful information or tips
Important instructions or warnings

2
Product Identication
Below figures indicate the position of the product labels on which the serial
numbers locate. Please record the serial numbers for access to maintenance
or other after-sale services.
Model: SPIRIT 1.0 Remote Control
Serial No.: DSRCXXXXXXX
SPIRIT 1.0R
FCC ID:2AKHE-EOM
SPIR IT 1.0R
FCC ID:2AKHE-E OM
Model: SPIRIT Battery
Type: Lithium-ion
Rated Capacity: 1018Wh
Rated Voltage: 40.7V
Temperature Range:
Charging: 0℃~45℃（32℉~113℉）
Discharging: -20℃~60℃（-4℉~140℉）
Storage: 15℃~25℃（59℉~77℉）
READ USER MANUAL FIRST
DO NOT DISASSEMBLE
KEEP AWAY FROM FIRE/HEAT SOURCE
DO NOT DISCARD AS HOUSEHOLD WASTE
ONLY CHARGE WITH SPIRIT CHARGER
Figure 0-1 Figure 0-2

3
Table of Contents
Acknowledgement..................................................................................... 1
Using this manual...................................................................................... 1
Symbols...................................................................................................... 1
Product Identication ............................................................................... 2
1 Product Overview ................................................................................ 5
1.1 In the Package .................................................................................... 5
1.2 Parts and Diagram ............................................................................. 7
1.3 Specications ..................................................................................... 8
1.4 Declaration of Conformity................................................................... 10
2 Important Notes before Start ................................................................ 12
2.1 Outboard............................................................................................. 12
2.2 Battery................................................................................................ 13
3 Installation .............................................................................................. 15
4 Operation ................................................................................................ 18
4.1 Checklist before Start ......................................................................... 18
4.2 Starting............................................................................................... 18
4.3 Stopping ............................................................................................. 19
4.5 Tilting up the Outboard Motor ............................................................ 21
4.6 Fixing the Steering Direction .............................................................. 21
5 Remote Control ...................................................................................... 22
5.1 LCD Display ....................................................................................... 22
5.2 Connecting Remote Control to the Outboard .................................... 24
5.3 Power Adjusting ................................................................................. 25
5.4 Charging the Remote Control............................................................. 26
5.5 Recalibration ...................................................................................... 27
5.6 Error Codes and Solutions ................................................................. 28
6 Battery Charging .................................................................................... 30
7 Trim Angle Adjusting.............................................................................. 32
8 Propeller Assembly................................................................................ 34
9 Anti-grounding Mode ............................................................................. 35
10 Maintenance ......................................................................................... 37

4
10.1 Notes................................................................................................. 37
10.2 Propeller Maintenance ..................................................................... 37
10.3 Replacing the Anode ........................................................................ 38
10.4 Maintenance Time Table .................................................................. 38
11 Transportation and Storage................................................................. 40
11.1 Transportation ................................................................................... 40
11.2 Placement......................................................................................... 40
11.3 Storage ............................................................................................. 40
12 Emergency Situations.......................................................................... 41
12.1 Impact Damage ................................................................................ 41
12.2 Sodden Outboard............................................................................. 41
12.3 Low Battery Level............................................................................. 41
13 Warranty ............................................................................................... 42
13.1 Warranty Policies.............................................................................. 42
13.2 Out of Warranty ................................................................................ 43
13.3 Warranty Claim Procedures ............................................................. 43

5
1 Product Overview
SPIRIT 1.0R is an 1kw (3hp equivalent) electric outboard with high overall
efciency. The self-contained battery is detachable and will oat if it falls into
water. Wireless remote control is free and flexible. It is is an ideal option for
medium and small sized boats.
SPIRIT 1.0R includes both longshaft and shortshaft models. Longshaft models
are recommended for the transom height of 400mm-500mm and shortshaft
models are recommended for the transom height of 300mm-400mm.
1.1 In the Package
Check all the items inside the package against the table below. If there is any
damage or lack of any listed item, please contact your dealer immediately.
Items Qty./Unit Figure
Outboard
(Main part) 1 set
Battery 1 set

6
Items Qty./Unit Figure
Battery
Charger 1 set
Kill
Switch 2 sets
Steering
Lock Pin 2 sets
Link Arm 1 set
Remote
Control 1 piece
Fixing
Guide 1 set
41mm
98mm
2× 6mm
Plotting Scale - 1:1
Screw Size - M6×12mm
User Manual
&
Warranty Card
1 set
Warranty

7
Save the ePropulsion original package for the outboard storage.
Other accessories mentioned in this manual need to be purchased
additionally from ePropulsion authorized dealers.
There are three types of chargers for SPIRIT Battery: standard charger
(included in the package), fast charger and solar charger (require separate
purchase from ePropulsion authorized dealers).
1.2 Parts and Diagram
Battery Handle
Charging Port
Charging Indicator
Battery Lock
Battery Pack
(Built-in lithium
batteries and BMS)
Beaching Pin
Propeller
Trim Release Lever
Skeg
Power Port
Power Cable
Steering Tube
Bracket Clamp
Clamp Tightening
Handle
Trim Pin
Shaft
Motor
Anode
Steering Tube
Communication
Board Box
Figure 1-1

8
1.3 Specications
SPIRIT 1.0R-L / SPIRIT 1.0R-S
Type Electric
Maximum Input Power 1KW
Rated Current 24.6A
Comparable Petrol Outboard 3HP
Maximum Overall Efciency 50%
Rated Rotation Speed 1200rpm
Control System Remote control
Communication Wirelss
Communication Distance ≤10m
Weight (without battery) 10.9Kg / 24lbs (S)
11.2Kg / 24.7lbs (L)
Dimension (L×W×H) 884mm×275mm×1042mm (S) / 1167mm (L)
34.8''×10.8''×41'' (S) / 45.9'' (L)
Shaft Length 625mm / 24.6'' (S)
750mm / 29.5'' (L)
Trim Angle 0°, 7°, 14°, 21°, 75°
Propeller Diameter/Pitch 280mm/5.8inch
SPIRIT Battery
Type Lithium-Polymer
Rated Capacity 1018Wh
Rated Voltage 40.7V
Cutoff Voltage 33V
Full Charged Voltage 46.2V

9
SPIRIT Battery
Charging Time ~ 6Hr
Cycle Life ≥500 cycles (80% of Rated Capacity)
Temperature Range
Charging: 0°C ~ 45°C (32°F ~ 113°F)
Discharging: -20°C ~ 60°C (-4°F ~ 140°F)
Storage: 15°C ~ 25°C (59°F ~ 77°F)
Dimension (L×W×H) 416mm×275mm×202mm
Weight 8.5Kg / 18.7bls
SPIRIT Standard Charger
Output Power 180W
Output Voltage 46.2VDC
Output Current 4A
Cutoff Current 0.4A
Voltage Accuracy 0.5%V
Temperature Range Operation: -29°C ~ 45.5°C (-20.2°F ~ 113.9°F)
Storage: -40°C ~ 75°C (-40°F ~ 167°F)
Rated Input Voltage 100 ~ 264VAC
Output Voltage 50Hz / 60Hz
Input Current (Max) 2A@220V
Efciency 87%

10
1.4 Declaration of Conformity
Object of the Declaration:
Product: SPIRIT 1.0R
Model: SPIRIT 1.0R-S, SPIRIT 1.0R-L, SPIRIT 1.0R-XS
Company Name: Dongguan ePropulsion Intelligence Technology Limited
Address: Room 202, Bldg.17A, Headquarter No.1, 4th XinZhu Road,
SongShan Lake District, Dong Guan, Guang Dong, China
The object of the declaration is in conformity with the following directives:
EMC-directive 2014/30/EU
MD-directive 2006/42/EC
RED-directive 2014/53/EU
Applied Standards:
EN 55014-1:2006+A1:2006+A2:2011
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 60204-1: 2016
EN ISO 12100:2010
EN 301 489-3: 2002 V1.4.1
EN 301 489-1: 2008 V1.8.1
The original certicate was issued by
Shenzhen An-Teng Testing Service Co., Ltd. in Shenzhen, China.
CE Test Report NO.: ATT1710200312E, ATT1710200312M, ATT1710200312D
Issued Date: October 20, 2017
This device complies with part 15 of the FCC Rules: Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference and,
(2) This device must accept any interference received, including
interference that may cause undesired operation.
FCC Test Report NO.: GTS201709000032E01
Issued Date: July 05, 2016

11
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The manufacturer is not responsible for any radio or TV itnerference caused
by unauthorized modications to this equipment. Such modications could void
the user's authority to operate the equipment.
Signature:
Shizheng Tao, Chief Executive Ofcer & Cofounder of
Dongguan ePropulsion Intelligence Technology Limited

12
2 Important Notes before Start
For safety, please read the following instructions and notes before using
this product. By using this product you hereby: 1) agree to these notes and
instructions; 2) agree not to use this product for purposes that infringe upon
or contravene laws and regulations; 3) agree to be responsible for your own
conduct while operating this product.
2.1 Outboard
Only allow adults who have correct and thorough understanding of this
manual to operate this product.
Always have a paddle on board especially if the electric outboard
motor is the only propulsion system.
Familiarize yourself with all the outboard operations, including start/stop,
steering and tilting.
Check the status of the outboard and battery level before each trip.
Follow the boat manufacturer’s instructions on the maximum allowed
outboard power of your boat, do not overload the boat or the outboard.
Take serious of battery safety. Follow battery instructions, avoid short-
circuit, overheat, overcharge and over-discharge.
Only run the outboard while the propeller is under water.
Stop the outboard immediately if someone falls overboard.
Tilt up the outboard above water after use.
Wash the outboard with fresh water after operating in salt water.
Do not leave the outboard in the water if the boat is driven by other forms
of power such as sailing or rowing.
If an error code displays and the outboard malfunctions, please reset the
throttle to zero position and cut the power off, then refer to the Warning
Information to acquire the solution to the error.
WARNING

13
For protection considerations, the motor will stop immediately if the battery
voltage drops below the critical level during operation or when running.
To keep electric connectors in good condition, please spray the connectors
about every 3 months with contact spray.
To store the outboard motor, put the machine in original ePropulsion
package and keep it in a dry and ventilated place without direct sun
exposure.
2.2 Battery
The SPIRIT Battery should only be charged with an ePropulsion original
charger. The battery has a built-in battery management system which provides
cell balancing function, over charging protection, over discharging protection,
short-circuit protection, over temperature protection, under temperature
protection, over current protection, communication function, etc. Though the
battery has been tested to be reliable and safe during normal operation, it
should be handled with care as safety is critically important. Please adhere to
the following instructions when using it.
Do not drop, strike or squash the battery.
Do not disassemble the battery or conduct unauthorized repair, the battery
disassembly can only be conducted by ePropulsion service.
Never charge a broken or damaged battery.
Only charge the battery with an ePropulsion original charger.
Do not charge the battery near flammable materials such as carpet or
wood.
Disconnect charger when not in use.
Though the battery is IP67 waterproof, it’s suggested not to immerse it in
water or store it in moist environment.
Keep conductive objects away from the discharging port and charging port
to avoid damage of electronic components.
WARNING

14
Use the port cap to avoid accidental short-circuit.
Never discharge the battery below 33V.
Store the battery in dry environment.
Charge the battery immediately after full discharge.
Before long-term storage, make sure the residual battery level is
60% around, store the battery at 18°C ~ 28°C (64.4°F ~ 82.4°F). If the
residual battery is more than 60% for over ten days without activity,
self-discharge will occur to the battery with a small current around
100mA until the battery level drops to 60% around.
Battery will actively discharge to 75% after 20 days without charging or
discharging.
If battery level is low for a long time, it will enter sleep mode. Charge to
wake it up.
During long-term storage, activate the battery every 3 months by
a charge condition and keep the battery level at 60% around. This
activation is very important and it can help keep the battery in good
condition.
After long-term storage, fully charge the battery before use.
Do not leave the battery in a hot or pressurized container, such as trunk
of the vehicle on hot days.
Dispose of unusable or damaged batteries in a container specially
reserved for this purpose, follow appropriate local guideline and
regulations. For further information you can contact your local solid waste
collecting point or your dealer.
Never dispose the battery as general household waste or in re.

15
3 Installation
Step1: Hang the electric outboard motor on the transom of your boat and
tighten the two clamp handles.
Transom Thickness
Range: 18mm~63mm
LOCK
Figure 3-1 Figure 3-2
Center line
The mounting height of the outboard affects the running speed seriously. When
the mounting height is too high, cavitation may occur to waste power. When
the mounting height is too low, the water resistance will increase and it will lead
Figure 3-3
Ensure to mount the outboard on the centerline of your boat. If the boat
shape is asymmetric, please consult your dealer to get proper solution.

16
to decreased efciency and lowered running speed. Mount the outboard and
ensure the top of propeller is ≥150mm below the bottom of the boat. Usually,
if 400mm≥transom height≥300mm, it’s recommended to select a shortshaft
SPIRIT 1.0R, while if 500mm≥transom height≥400mm, it’s recommended
to select a longshaft SPIRIT 1.0R. The below Figure 3-4 shows the suitable
transom height for a shortshaft SPIRIT 1.0R.
Figure 3-4
Select a proper shaft length according to your transom height and applications.
The optimum mounting height is affected by the conditions of boat and
requirements. It’s recommended to test running at a different height to help
obtain the optimum mounting height. You can consult your dealer to get more
information.
Step2: Lift the battery by gripping the handle and pull up the battery lock. Align
the two slots on the battery bottom to the blocks on the bracket and put down
the battery. Release the battery lock and lock the battery on the bracket.
Ensure to hold the battery handle before detaching or mounting the
battery.
Transom Height
400mm≥H≥300mm
150mm≥H≥100mm
R=140mm

17
Slot
Block
Figure 3-5
Step3: Plug the power cable in the power port and tighten the connector.
Figure 3-6 Figure 3-7
Make sure the power cable connector and socket are dry before
connecting to avoid short-circuit.
Please spray and clean the connectors about every 3 months with contact
spray.

18
4 Operation
4.1 Checklist before Start
1. Check and ensure the battery has enough power.
2. Ensure the outboard is correctly and rmly installed on the boat.
3. Ensure the propeller is correctly and rmly installed on the outboard.
4. Ensure the battery is correctly and rmly installed on the outboard.
5. Before start, check and ensure the throttle is in neutral position.
6. Ensure the throttle can travel smoothly.
7. Check the connections before each trip, ensure the connections are correct
and secure, no disconnection or worn/aging connections.
8. Check and ensure the power port is dry to avoid short-circuit.
4.2 Starting
Step1: Put the kill switch on the pointed position of remote control (Figure 4-1).
Step2: Attach the other end of the kill switch to your wrist or life vest (Figure 4-2).
Figure 4-1 Figure 4-2
Only start the outboard when the propeller is under water.
If the cable has been immersed in water, please dry the cable thoroughly
before connection or turning on power.
For safety consideration, always attach the lanyard of kill switch to your
wrist or life vest, so that the outboard will be stopped in the event of
emergency.