ePropulsion LAGOON User manual

LAGOON USER MANUAL
January, 2017 Version 1.1
Copyright © 2017 ePropulsion All Rights Reserved

1
Acknowledgements
Thanks for choosing ePropulsion products, your trust and support in our
company are sincerely appreciated. We are dedicated to providing high-
performance underwater thrusters, as well as electric outboards, reliable
lithium batteries and accessories.
Welcome to visit www.epropulsion.com and contact us if you have any
concerns.
Using this Manual
Before use of the product, please read this reference manual thoroughly
to understand the correct and safe operations. By using this product, you
hereby agree that you have fully read and understood all contents of this
manual. ePropulsion accepts no liability for any damage or injury caused by
operations that contradict this manual.
Due to ongoing optimization of our products, ePropulsion reserves the rights
of constantly adjusting the contents described in the manual. ePropulsion
also reserves the intellectual property rights and industrial property rights
including copyrights, patents, logos and designs, etc.
This manual is subject to update without prior notice, please visit our webstie
www.epropulsion.com for the latest version. If you find any discrepancy
between your products and this manual, or should you have any doubts
concerning the product or the manual, please visit www.epropulsion.com.
ePropulsion reserves the rights of nal interpretation of this manual.
This manual is multilingual, in the case of any discrepancy in the
interpretation of different language versions, the English version shall prevail.
Symbols
The following symbols will help to acquire some key information.
Important instructions or warnings
Useful information or tips

2
Product Identication
Below Figure 0-1 indicates the position of the label for LAGOON Battery.
Figure 0-2 and Figure 0-3 indicate the position of serial numbers for
LAGOON Controller and LAGOON Motor.
CAUTIONS
FCC ID: 2AKHE-LAGOON
READ USER
MANUAL FIRST
DO NOT
DISASSEMBLE
Model: 24V Li-ion Battery
Rated Capacity: 333Wh
Rated Voltage: 22.2 V
Charging Temperature:
0°C~45°C(32°F~113°F)
Discharging Temperature:
-20°C~60°C(-4°F~140°F)
KEEP AWAY FROM
FIRE/HEAT SOURCE
DL A B1FC0001
CAUTIONS
FCC ID: 2AKHE-LAGOON
READ USER
MANUAL FIRST
DO NOT
DISASSEMBLE
Model: 24V Li-ion Battery
Rated Capacity: 333Wh
Rated Voltage: 22.2 V
Charging Temperature:
0°C~45°C(32°F~113°F)
Discharging Temperature:
-20°C~60°C(-4°F~140°F)
KEEP AWAY FROM
FIRE/HEAT SOURCE
DLA B1FC0001
S/N: DLAB1FC0001
FCC ID: 2AKHE-LAGOON
Figure 0 -1
MODEL: LAGOON
S/N: DLAR1FC0001
FCC ID: 2AKHE-LAGOON
MODEL: LAGOON
S/N:
DLAR1FC0001
FCC ID: 2AKHE-LAGOON
MODEL: LAGOON
S/N: DLAM1FC0001
MODEL: LAGOON
S/N: DLAM1FC0001
Figure 0-2 Figure 0-3
The above three parts have different serial numbers. Please record all
the three serial numbers for access to maintenance or other after-sale
services.

3
Acknowledgements .................................................................................. 1
Using this Manual...................................................................................... 1
Symbols ..................................................................................................... 1
Product Identication ............................................................................... 2
Table of Contents ...................................................................................... 3
1. Important Safety Instructions.............................................................. 5
2. Product Overview.................................................................................. 7
2.1 In the Package ................................................................................. 7
2.2 Parts and Diagrams..................................................................... 9
2.3 Technical Data............................................................................. 11
2.4 Declaration .................................................................................. 12
3. Installation ............................................................................................. 14
3.1 Installation of LAGOON Motor ......................................................... 14
3.1.1 Install with a Standard Adapter................................................................ 14
3.1.2 Install with LAGOON Universal Adapter ................................................. 16
3.2 Fix LAGOON Battery....................................................................... 18
3.3 Connect LAGOON Battery to LAGOON Motor................................ 20
3.4 Attach the LAGOON Controller ....................................................... 20
4. Operation ............................................................................................... 22
4.1 Use of LAGOON Battery.................................................................. 22
4.1.1 B at ter y L ED s ............................................................................................ 22
4.1.2 Switch On/Off the LAGOON Battery ....................................................... 24
4.1.3 Charge the Battery .................................................................................. 25
4.2 Use of LAGOON Controller ............................................................. 26
4.2.1 Switch On/Off the LAGOON Controller................................................... 26
4.2.2 Wirelessly Control the LAGOON Motor .................................................. 27
4.2.3 Replace Button Cell for LAGOON Controller.......................................... 28
4.3 Pair LAGOON Controller with LAGOON Battery ............................. 28
5. Detaching LAGOON Motor................................................................... 30
Table of Contents

4
6. Transport and Storage.......................................................................... 36
6.1 Transport.......................................................................................... 36
6.2 Storage ............................................................................................ 36
7. Routine Maintenance ............................................................................ 37
8. Warranty Claims.................................................................................... 38
8.1 Warranty Policies ............................................................................. 38
8.2 Out of Warranty ............................................................................... 39
8.3 Warranty Claim Procedures............................................................. 39

5
1. Important Safety Instructions
This user manual contains important information pertaining equipment
installation and safety instructions. Before starting to use the product, please
read this manual fully and pay special attention to the following safety
instructions:
Before Operation
Users who are allowed to use LAGOON should be in good physical state,
know how to swim and how to paddle.
Always wear a life vest and always wear a leash when operating.
Always take a paddle on board.
Only adults who have thoroughly read and fully understood this manual
are allowed to operate this product.
Check the status and function of LAGOON before use and make sure all
components are in good condition.
Make sure the LAGOON Motor is securely mounted on the bottom of the
SUP/kayak, etc. before operation.
Make sure the LAGOON Controller works well by wireless connection.
Familiarize yourself with all the operations related to this product.
Check applicable local water safety rules and boating regulations before
use.
Observe the surrounding environment in advance to avoid unfavorable
conditions such as strong winds, waves, currents or rapids, etc.
During Operation
Do not rotate the motor in shallow water or out of water. Only operate it in
water with enough depth and avoid all possible obstacles.
Follow the correct operating instructions in this user manual.
Attach the LAGOON Controller to your wrist or paddle for easy access.
Do not run the motor if swimmers or other watercrafts are near the boat.
Press the on/off button on the LAGOON Controller immediately in
emergency situations.
Observe local water safety rules and boating regulations while operating
the product.
Do not run the motor under the inuence of alcohol or drugs.
Switch off the LAGOON Battery and LAGOON Controller before detaching

6
the LAGOON Motor from the SUP/kayak, etc.
Handling
Never run the motor in the air as it will seriously shorten the motor
service life, generate loud noise and possibly cut fingers. Even if
users unintentionally run the motor in the air, the motor will stop
running immediately in 5 seconds for protective purpose, and the
motor may be unable to start normally. Never get close to the running
propeller.
Never dismantle or repair the product on your own or by any unauthorized
third party.
Keep it away from flammable gas, corrosive and other dangerous
substance.Store it in a dry and ventilated place without direct sun/rain
exposure and store it far away from dangerous substances.
Pay attention to battery safety and operate it in the right way to avoid
short-circuit, overheat, overcharge and over-discharge. Never drop the
battery.
Only use LAGOON Charger designed for the battery. Other chargers
may lead to shortened runtime, premature battery failure, or even re or
explosion.
Clean the LAGOON Motor with fresh water after each use.

7
2. Product Overview
LAGOON is a lightweight underwater electric propulsion system. The well-
adapted LAGOON can be mounted on the back of nearly all kinds of SUPs,
kayaks, canoes, etc. that traditionally rely on human paddling. This product
mainly consists of a LAGOON Motor, a LAGOON Battery and a wireless
LAGOON Controller. This small but mighty propulsion system supports
about 1 hour of full-speed running, perfectly backing you up whether you
need a rest or want to go further.
2.1 In the Package
Unpack the package and check if there is any damage caused during
transport. Check all the items inside the package against the below list. If
there is any transport damage or lack of any listed item, please contact your
dealer immediately.
No. Items Qty./Unit Figure
1LAGOON
Motor 1 set
2LAGOON
Battery 1 set
3
LAGOON
Universal
Adapter
1 set

8
4
US Fin Box
Adapter
(standard)
1 set
5
Inatable
SUP Fin
Box Adapter
(standard)
1 set
6Ratchet
Strap 2 pieces
7
LAGOON
Battery
Charger
1 set
8
LAGOON
Controller
with a
Velcro Tape
1 set
9
User Manual
& Warranty
Claim Card
1 set
Warranty
Attach the LAGOON Motor to the bottom of the watercrafts by using a
standard adapter which is compatible with the n box on the watercraft,
or using the LAGOON universal adapter for watercrafts that have
different n boxes or without a n mounting system.
Other accessories mentioned in this manual are not included in the
package. Please place additional orders if you need them.
Save the original package for transport and storage.

9
2.2 Parts and Diagrams
LAGOON Controller
LAGOON Motor
Power Cable
LAGOON Battery
Figure 2-1 LAGOON
Propeller
Motor Module
Power Cable
Motor Base
Protective
Frame
Side ViewFront View
Figure 2-2 LAGOON Motor
Power Button
LED Lights
Charge/Discharge
Port
Battery
Buckles
Bottom ViewFront View
Figure 2-3 LAGOON Battery

10
Throttle Slide Block
On/Off Button
Velcro Tape
Figure 2-4 LAGOON Controller
Inflatable SUP
fin box adapter
US fin box
adapter
LAGOON
universal
adapter
Ratchet
Strap
Strap Buckle
Screw
Back Nut
Retaining Chip
Figure 2-5 Adapters

11
2.3 Technical Data
LAGOON General Data
Input power 300W
Static thrust 23lbs
Total weight 4Kg / 8.8lbs
LAGOON Motor weight 1.5Kg / 3.3lbs
Dimension 162mmx167mmx182 mm / 6.4”x6.6”x7.2”
Propeller diameter 150mm / 5.9”
Propeller pitch 115mm / 4.5”
Max propeller speed in rpm 1800rpm
Control method Wireless
LAGOON Battery
Battery type Lithium-ion
Rated capacity 333Wh
Rated voltage 22.2V
Final charging voltage 25.2V
Cutoff voltage 18V
Weight 2.5Kg
Cycle life ≥500 cycles (80% of rated capacity)
Charging time 3hrs
Temperature range Charging: 0˚C ~ 45˚C / 32˚F ~ 113˚F
Discharging: -20˚C ~ 60˚C / -4˚F ~ 140˚F
Relative humidity 65 ± 20%RH
Dimension 216mmx178mmx100mm / 8.5”x7”x4”
LAGOON Controller
Throttle Stepless throttle
Forward/Reverse control Forward control available
Power source One built-in button cell (CR2032)

12
LAGOON Charger
Input power 180W
Input voltage (AC) 100V ~ 240V
Input frequency 50Hz / 60Hz
Input current ≤ 3A
Output voltage (DC) 25.2V / 7A
Temperature range Operating: -29˚C ~ 45.5˚C / -20.2˚F ~ 113.9˚F
Storage: -40˚C ~ 75˚C / -40˚F ~ 167˚F
Efciency ≥87%
Battery performance is dependent on many external factors such as
operating environment and conditions of SUP/kayak, etc.
2.4 Declaration
ePropulsion Innovation (HK) Ltd.
Rm.1501 (682), 15/F Spa CTR 53 - 55, Lockhart Rd., WanChai, Hong Kong
Declare conformity of design in LAGOON
With the following directives:
EMC-directive 2014/30/EC
MD-directive 2006/42/EC
LVD-directive 2014/35/EU
R&TTE-directive 2014/30/EU
Applied standards:
EN 55014-1: 2016
EN 55014-2: 2015
EN 61000-3-2:2014
EN 61000-3-3: 2013
EN 60204-1: 2006+A1 :2009
EN ISO 12100:2010
EN 60204-1: 2006+A1 :2009
EN ISO 12100:2010
EN ISO 6185-2: 2001
EN ISO 8665:2006

13
EN ISO 9093-1:1998
EN 28848-1:993
ETSI EN 301 489-3: 2002 V1.4.1
ETSI EN 301 489-1:2008 V1.8.1
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1). This device may not cause harmful interference and,
(2). This device must accept any interference received, including interference
that may cause undesired operation.
The origninal FCC certicate was issued by Global-Standard Testing Service
Co., Ltd. in Shenzhen, Guangdong.
The original CE certicate was issued by Shenzhen An-Teng Testing Service
Co., Ltd.
Certificate NO.: ATT1612160218E, ATT1612160218M, ATT1612160218S,
ATT1612160218RF.
Issued Date: Dec 22nd, 2016
Signature:
Mr. Danny Tao, CEO & Cofounder of ePropulsion Innovation (HK) Ltd.

14
3. Installation
LAGOON comes with two adapters that can be t into two major standard
n boxes which are widely used on most SUPs and a universal adapter for
kayaks and any small watercraft without standard n boxes.
3.1 Installation of LAGOON Motor
Before installing the LAGOON Motor to an SUP/kayak, etc., note that the
SUP/kayak, etc. must be strong enough to support the LAGOON Motor and
LAGOON Battery.
3.1.1 Install with a Standard Adapter
Two standard adapters are included in the LAGOON package: US fin box
adapter and inflatable SUP fin box adapter. These two standard adapters
can be used with the corresponding standard fin boxes in the market.
Choose a suitable one and follow the below steps to attach the LAGOON
Motor to the standard n box on the bottom of the SUP/kayak.
a. Install with a US n box adapter
1) Attach a US n box adapter onto the motor module base as shown in the
Figure 3-1. First align the adapter with the motor base; then insert the
adapter into the motor base until it is well attached.
21
Figure 3-1
2) Turn the SUP/kayak bottom up to attach the US n box adapter.
Step1: Place the back nut into the slot of the US n box, and move the nut to
the slot end near the tail of the SUP/kayak, etc.
Step2: Insert the adapter into the US n box in the direction of the arrow, and
slide it in until it fully enters;

15
Step3: Move the back nut in the slot to align it with the hole on the adapter,
then insert the screw into the hole and screw it tightly into the back nut.
Step4: The LAGOON motor is well attached to the US n box.
12
4
3
back nut
screw
Figure 3-2
The propeller should face the tail of the SUP/kayak, etc.
b. Install with an inatable SUP n box adapter
1) Attach an inatable SUP n box adapter onto the motor module base as
shown in Figure 3-3. First align the adapter with the motor base; then
insert the adapter into the motor base until it is well attached.
21
Figure 3-3

16
2) Turn the SUP/kayak bottom up to attach the inatable SUP n box.
Step1: Slide the standard adapter into the cave of the inatable SUP n box.
Step2: Insert the retaining chip into the place indicated in Figure 3-4 to x
the adapter.
1
retaining chip 2
Figure 3-4
Do not force the adapter into the n box. If the adapter can’t t into the
n box properly, slide it out and check if the installing direction is correct.
The propeller should face the tail of the SUP/kayak, etc.
Make sure the n box is clean before installation of the motor module.
3.1.2 Install with LAGOON Universal Adapter
If the SUP/kayak, etc. has no n box or if both the two standard adapters
can’t t into the existing n mounting system, it’s suggested to use LAGOON
universal adapter to attach the LAGOON Motor. While mounting with the
LAGOON universal adapter, please follow the below steps.
1) Turn the SUP/kayak, etc. bottom up.
2) Penetrate the two ratchet straps through the side opening of the universal
adapter and attach the universal adapter onto the relatively at part on the
bottom.

17
1 2
Figure 3-5
3) Fix the two ratchet straps: rst, penetrate the strap into the buckle; then,
repeat unfolding and folding the buckle to tense the strap. Fold the buckle
when the strap is tensed.
1
2
Figure 3-6
4) Attach the motor module to the universal adapter in the arrow direction.

18
Figure 3-7
The propeller should face the tail of the SUP/kayak, etc.
While installing the universal adapter, make sure the adapter is in
alignment with the bottom centerline of the SUP/kayak, etc.
3.2 Fix LAGOON Battery
a. Fix LAGOON Battery on SUPs
There are two major methods of xing the LAGOON Battery on an SUP. For
SUP with a bungee system, the battery can be xed with the bungee cords.
SUP bungee cord
Velcro tape
Figure 3-8 Fix the battery with the SUP bungee cords