Equip 650314 User manual

INSTALLATION MANUAL
32"-55" FLAT SCREEN TILT/SWIVEL
WALL MOUNT BRACKET
650314 50kg
(110lbs)
RATED
50kg
(110lbs)
RATED
650314-Manual.indd 1 2013/9/26 3:07:35 PM

wall mount (x1)
A
4mm Allen key (x1)
E
wrench (x1)
F
3mm Allen key (x1)
D
universal plate (x1)
B
template (x1)
C
650314-Manual.indd 2 2013/9/26 3:07:35 PM

Package M
Package W
ST6.3x55 (x6)
W-A
concrete anchor (x6)
W-B
D6 washer (x6)
W-C
M5x14 (x4)
M-A
M6x14 (x4)
M-B
washer (x4)
M-F
M8x20 (x4)
M-C
M6x30 (x4)
M-D
big spacer (x4)
M-H
M8x30 (x4)
M-E
small spacer (x8)
M-G
650314-Manual.indd 3 2013/9/26 3:07:35 PM

1.
2-A. for wood stud wall mounting
55mm
(2.2")
ø 4.5mm
(ø 3/16")
406mm 450mm 600mm 610mm
(16") (17.7") (23.6") (24")
v v x x
Stud
Model:650314
650314-Manual.indd 4 2013/9/26 3:07:36 PM

2-B. for solid brick and concrete mounting
60mm
(2.4")
ø 10mm
(ø 3/8")
650314-Manual.indd 5 2013/9/26 3:07:37 PM

3.
Install the decorative covers along the wall
plate rail until they fit snuggly onto the wall
plate.
650314-Manual.indd 6 2013/9/26 3:07:37 PM

4.
Remove the both bottom nuts.
650314-Manual.indd 7 2013/9/26 3:07:37 PM

4-1. for at back screens
4-2. for recessed back screens or to access A/V inputs
650314-Manual.indd 8 2013/9/26 3:07:38 PM

5.
4mm
loosen the upper flat nut leaving a
4mm space to the universal plate.
- level the TV.
- place the lower nuts and tighten all nuts.
650314-Manual.indd 9 2013/9/26 3:07:38 PM

6.
Note: push the cable covers along the
arm to remove the cable covers easily.
remove the cable covers to run the cables.
re-attach the cable covers to hold the cable in place.
Note: - leave slack in the cable for arm movement.
- route the power cable and the signal cable in differnet cable covers to avoid signal disturbance.
650314-Manual.indd 10 2013/9/26 3:07:39 PM

7.
slightly loosen or
tighten the screws
as required due to
different weights
of the TV.
650314-Manual.indd 11 2013/9/26 3:07:40 PM

650314-Manual.indd 12 2013/9/26 3:07:42 PM