Ergo Furniture STYLE User manual

NSW VIC QLD HONG KONG CHINA
USE this product only for seating one person at a time.
DO NOT use this chair as a step stool/ladder.
DO NOT sit on any part of the chair except the seat.
DO NOT use chair on uneven oor surfaces.
DO NOT use chair unless all bolts, screws are tight.
At least every 6 months check all bolts, screws to be sure they are tight.
PARTS STEPS
STEP 2STEP 1
STEP 5
STEP 3 STEP 4
IF ANY PARTS ARE MISSING, BROKEN, DEMAGED OR WORN, STOP USE OF THE
PRODUCT UNTIL REPAIRS ARE MADE USING FACTORY AUTHORIZED PARTS.
FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.
PREVENTIVE MAINTENANCE AND WARNING
1. 11.
2. 13.
6. 16.
17.
3. 14.
7.
4. 15.
8.
10.
11.
5. 16.
9.
CASTOR X 5
ARM X 2
BACKREST
BOLT X 1
BACKREST
BOLT X 1
BACKREST
POST X 1
BACKREST POST
BELLOW X 1
BACKREST POST
SCREW X 1
ALLEN
WRENCH X1
BASE X 1
GAS LIFT X 1
ARM PLATE X 2
GAS BELLOW X 1
SEAT X 1
MECHANISM X 1
MECH. SCREW X 6
ARMS PLATE
SCREW X 8
BACK X 1
ARM WIDTH
ADJ. KNOB X 2
ASSEMBLY INSTRUCTIONS

NSW VIC QLD HONG KONG CHINA
»Vacuum regular
»Regularly adjust mechanism angle
»Regularly adjust gas height
»All warranty claims to be forwarded to place of purchase
»Warranty covers components and workmanship only
»Damage or wear and tear not covered by warranty
»Misuse or abuse will not be covered under warranty
RIGHT 2ND LEVER
To adjust seat height
RIGHT BACK LEVER
To adjust back angle
FRONT KNOB
To adjust weight tension
ADJUSTABLE ARMS
To adjust back height
hold back with two hands
while seated and raise to
desired height
To lower the back height
raise back all the way to
the top and release slowly
RIGHT 3RD LEVER
To adjust seat angle
(backwards)
RIGHT FRONT LEVER
To adjust seat angle
(forwards)
INSTRUCTIONS OF USE
700MM BLACK NYLON 5 STAR BASE WITH CASTORS
Use soft tyred castors for tiles
Use hard tyred castors for carpet
X Do not use as a step ladder