1 of 2
Created on:2014-06-06
Part No.
1
2
1
1
RTA Hardware (7)
Side rail (3)
Footboard (2)
Headboard (1)
QUEEN BED
TRA-QUEBED-016H/F/R
QTY
Part No.
Part Description
Slat (4) 3 4
QTY
1
1
2
1
KING BED
TRA-KINBED-016H/F/R
*** NOTE KEEP THIS SHEET ***
In the unlikely event that you would need a replacement part for your table,
please contact your local authorized Schnadig International dealer. If you
need replacement hardware quickly, it could be purchased from your local
hardware store.
1) Assemble the Bun feet (8) and headboard / footboard by the bolt (H), nut (D) and Flat Washer (I) tighten by wrench (E), as shown in Diagram A.
2) Connect the side rail and headboard / footboard by bolt (F).
3) Assemble the side rail and headboard / footboard using the curved washer (A),
flat washer (B), lock washer (C), and nut (D) tighten by wrench (E), as shown in Diagram A.
4) Assemble the support leg on the slat, as shown in Diagram B.
5) Assemble support slats onto the Side Rails with screws (J), OR with Screws (J), and
metal connecter (G) to holding the slat on the side rail. Use a Phillips Head Screwdriver
to tighten screws, as shown in Diagram C OR Diagram C1
UNPACK ALL PARTS AND CHECK THEM AGAINST PARTS LIST ON THIS INSTRUCTION SHEET BEFORE DISCARDING PACKING AND CARTON!!
ASSEMBLY INSTRUCTIONS
TWO PEOPLE AND PHILIP'S SCREW DRIVER REQUIRED
CARACOLE TRADITIONAL
TRA-QUEBED-KINBED-CALBED-016H/F/R
1
2
1
1
QTY
4
Part No.
CAL KING BED
TRA-CALBED-016H/F/R
tra-quebed-016H
tra-quebed-016F
tra-quebed-016R
tra-quebed-016F-3067
tra-quebed-016R-3001
tra-kinbed-016F
tra-kinbed-016H
tra-quebed-016R
tra-kinbed-016F-3067
tra-quebed-016R-3001
tra-kinbed-016H
tra-kinbed-016F
tra-calbed-016R
tra-kinbed-016F-3067
tra-calbed-016R-3001
16
Screw(4.2x32)
Hardware List
RTA Hardware(6)
J
Q'ty(Queen bed)
RTA Hardware(7) for Queen/KingBed
Hardware List
Curved Washer(5/16"Dia)
Flat Washer(5/16"R8) 16
bolt
1
tra-quebed-016F-3001tra-quebed-016F-3001 1
1
tra-quebed-016F-3001
RTA Hardware (6)
Support leg (5) tra-quebed-016F-30305 3tra-kinbed-016F-30305 8tra-kinbed-016F-30305 8
metal connecter (toholding
the slat on the side rail)
G
RTA Hardware(7) for Cal Bed
Hardware List
bolt
16
I
H
Flat Washer(5/16"R11.5)
bolt 8
I
H
Flat Washer(5/16"R11.5)
bolt 8
2set
Bun feet (8) 2set 2set
tra-quebed-016H-30131 tra-quebed-016H-30131 tra-quebed-016H-30131
