Erreka PR110 User manual

!
INSTRUCTION MANUAL
PR110, PR112, PR114, PR116
PR110 PR112 PR114 PR116
Learning rolling code:
1. Press learning key of receiver the LED will flash indicating the status of learning.
2. Press any button of the keyfob or press pushpad.
3. Press Learn on receiver to confirm as the pilot lamp flash 5 time slowly.
4. Press same button of the keyfob or press pushpad to confirm learn.
Delete memory message
Press the learning key of the receiver for 8 seconds until the LED stops, which indict
success to delete the memory message.
DATA
Working voltage
DC12V/ 24V (optional)
Static working current
≤7mA
Working temperature
-40℃to
+80℃
Receiving sensitive
≥-105dBm
Working frequency
315MHz、433MHz (optional)
Contact current
≤10A

6. Circuit diagram for your reference, All PREMIS models are Normally Open
IC!
Black = Button (B) NO
Red = Button (B) Com
White = Button (B) NC
Orange = Button (A) NO
Yellow = Button (A) Com
Green = Button (A) NC
Relay Relay Default Jumper F E D C B A + -
Blue = Neutral / Com
Purple = Low Voltage 24v
Learning key
LED F E D C B A + -
PR116
PR110
PR116
Relay capacity
10A 250VAC or 10A 30VDC
Receive the type of encoding
Learning code, Fixed code, Rolling/Hoping
code
Maximum storage for transmitter
30pcs of learning or fixed code; 6pcs of
rolling code
Size
62mmⅹ43.5mmⅹ30mm

PR110 PR112 PR114
PR114 - WITH PUSH PAD
PR116
PR114 - WITH PUSH PAD