7
Settings & Preferences – Overview
AutoMute Low/Med*/High/Off Automatically reduces audio to preferred volume during alert
AutoLearn On* / Off Automatically stores and locks out false alarms
Units English* / Metric Units for distance and speed
Language English* / Espanol Language for voice and text
Voice On* / Off Voice announcements
GPS Filter On* / Off Enables GPS-powered features
AutoPower Off When installed to a switched power supply, powers off with the vehicle’s ignition
1 Hour Powers off automatically after 1 hour
2 Hours Powers off automatically after 2 hours
4 Hours* Powers off automatically after 4 hours
8 Hours Powers off automatically after 8 hours
NOTE: AutoPower only works with constant power-ignition. If AutoPower is on,
the display screen goes blank after 30 minutes to save screen life.
Display screen will turn on automatically after you reach 10 mph
Band Enables Default* Default Settings for North America
Modified Customize the bands you want to monitor
Press MUTE to go from Press Up or Down to change your setting within a category
one category to the next
X Band On* / Off
K Band On* / Off
Ka Band On* / Off
Ka-POP On / Off*
Laser On* / Off
TSR On* / Off Automatically rejects traffic flow sensor false alarms
Shifters Receive*/Shift /Off Select the mode used by all shifters.
Receive = receive-only mode
Marker Enables Default* Default settings
Modified Customize the types of locations you
want alerted to
Press MUTE to go from Press Up or Down to change your
one category to the next setting within a category
Other On* /Off Other location
Redlight On* / Off Red light camera
Red & Speed On* / Off Red light & speed camera
Speed Camera On* / Off Speed camera
Speed Trap On* / Off Speed trap
Air Patrol On / Off* Known aircraft patroled areas
NOTE: User cannot mark an Air Patrol location
Clear Locations Marked Clear all user-marked locations. Press MUTE button to confirm
Lockouts Clear all lockouts. Press MUTE button to confirm
Defender Clear all DEFENDER Database data. Press MUTE button to confirm
Format Clear DEFENDER Database, all markers, and all lockouts.
Press MUTE button to confirm
*Default Setting
Notes: For descriptions of fea-
tures and functions available
when connected to ESCORT
Live, visit EscortRadar.com
To view serial number and
software revision press MRK
and SEN while powering on
detector.
To restore ESCORT MAX Ci 360
to its original factory settings,
press and hold MRK and BRT
while turning the power on. A
Restored message will display,
acknowledging the reset.