Espressione Supremma Super Automatic User manual

SUPREMMA SUPER AUTOMATIC
instructionsmanual / manuel d'instructions
manual de instrucciones / manual de instruções
MODEL CA4865
c/o The Smith Agency, Ltd.
P.O . Box 669307, Marietta, Georgia USA 30066.0106
Phone [phone] Fax [phone]
[email protected]et
US ETL Certified
ENGLISH -FRANÇAIS - ESPAÑOL -PORTUGUÊS

1
Thank you for choosing Espressione product and for placing
your trust in our brand. This super-automatic coffee-maker
has a maximum performance pressure pump (18 Bar) to offer
you the best professional espresso coffee in the comfort of
your home. With the touchscreen technology, you can easily
select the espresso you prefer by pressing directly on the
digital screen. This high-tech coffee-maker will tell you at any
given moment which selection you have made and what it is
making by means of graphic messages. Its menu is highly in-
tuitive and easy to use so that you can adapt the machine to
your personal preferences without any great complications.
We recommend you read the instructions handbook care-
fully to discover all the options your Espression Supremma
has to offer. We hope you enjoy this coffee-maker and the
delicious coffee it makes.
1 IMPORTANT
• Please read these instructions carefully before using the cof-
fee-maker for the first time. KEEP THEM IN A SAFE PLACE SO
THAT YOU CAN REFER TO THEM WHENEVER YOU NEED TO.
• Do not touch the hot surfaces; use the controls and handles
that have been specifically designed for this purpose.
• Disconnect the coffee-maker when it is not in use and before
cleaning. Leave the coffee-maker to cool before adding or
removing parts and, especially, before cleaning it.
• This coffee-maker has been designed for indoor use; do not
use it outdoors.
• Do not place the coffee-maker on a hot surface or too near
heat sources.
• Do not leave the cable hanging over the edge of the table
or in contact with hot surfaces.
• Do not use the coffee-maker for any purpose other than
that for which it has been designed: making coffee in a do-
mestic environment.
• When disconnecting the coffee-maker, first switch it off by
pressing the on/off switch (OFF position at the rear) and
then unplug the cable from the mains.
• Take particular care when using steam.
• Do not wet the coffee-maker or submerge it in water or any
other liquid.
• Keep the coffee-maker out of the reach of children.
• Use the grinder for grinding coffee only.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabili-
ties, or lack of experience and knowledge, unless they have
SUPER-AUTOMATIC COFFEE-MAKER ESPRESSION SUPREMMA
CA4865

been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not
play with the appliance.
CAUTION! When you want to dispose of the appli-
ance, NEVER throw it in the rubbish bin. Take it to
your nearest CLEAN POINT or the waste collection
centre closest to your home for processing. You will
thus be helping to take care of the environment.
2 PRECAUTION
• Remove all the used elements to protect the product during
transport, as well as all material used for promotions, such as
plastic bags, cardboard, stickers, the digital screen protec-
tion, etc. on both the outside and inside of the coffee-maker.
Keep these elements out of the reach of children.
• If the mains cable is damaged, it must be replaced by the
manufacturer or by an authorised technical service to pre-
vent any possible danger.
• Do not use warm or hot water to fill the tank under any cir-
cumstances. Use only water at room temperature.
• Never clean the coffee-maker with a scouring pad or a
rough sponge. Use only a soft cloth moistened with water.
• To avoid lime scale deposits in the pipes in your coffee-maker,
we recommend you use purified water or still mineral water.
3 IMPORTANT
The manufacturer will not accept any liability whatsoever for
damage caused by:
• Inappropriate use of the coffee-maker for any purpose
other than that for which it has been designed.
• Repairs carried out by unauthorised persons.
• Manipulation of the mains cable.
• Manipulation of any part of the coffee-maker.
• Use of spares or accessories that are not supplied by the
manufacturer.
• Removal of lime scale from the coffee-maker using any
method that is not in accordance with the instructions giv-
en in chapter 16. REMOVAL OF LIME SCALE.
In these cases, the warranty will be void.
4 SAFETY STANDARDS
READ ALL INSTRUCTIONS.
SAVE THE INSTRUCTIONS
IN A SAFE PLACE SO THAT
YOU CAN REFER TO THEM
WHENEVER YOU NEED
In the event of an emergency
Unplug the coffee-maker immediately.
The coffee-maker must be used only:
• Indoors.
• At a room temperature of between 10°C and 40°C.
• To make coffee, hot water, steam milk or heat liquids
using steam.
• For domestic use.
• By adults who are in full possession of their physical and
mental faculties.
Power cable
Connect the coffee-maker to an appropriate socket; the voltage
must coincide with that indicated on the specifications plate.
IMPORTANT! Check that the socket is connected to the mains.
2

3
Installation
• If you find coffee grounds, it is because the coffee-
maker has been tested to make sure it works perfectly.
• Place the coffee-maker on a completely flat surface. Do
not place it on a hot surface under any circumstances.
• Keep it at a distance of 10 cm from walls and heat
sources (gas, oven, etc.).
• Do not keep the coffee-maker at a room temperature of
below 0°C; the coffee-maker may be damaged by the
water inside freezing.
• The mains plug must be accessible at all times.
• The mains plug must not be damaged, hanging or
placed on hard surfaces.
• Do not use the power cable to move the coffee-maker
by pulling on it under any circumstances.
Hazards
• Do not aim the steam jet or hot water directly at anyone,
since there is a risk of burns.
• Do not place any objects inside the coffee-maker under
any circumstances (electrical hazard).
• Do not touch the coffee-maker if your hands are wet. Do not
unplug the coffee-maker by pulling on the power cable.
Responsibilities.
• Do not use the coffee-maker if it does not work cor-
rectly or if you suspect that it may be faulty, e.g. after it
has accidentally been dropped.
• Have the product repaired at an authorised centre.
• Turn off the coffee-maker before opening the side cover.
Spares
To guarantee your safety and the correct operation of your
coffee-maker, use only spares and accessories that are au-
thorised by the manufacturer.
5 PARTS
Switch
Coffee grounds tray
Cover
open
lever
Brewing unit
Grounds compartment

4
Coffee bean tank cover Grind level adjustment
Coffee bean compartment
Water tank cover
Water tank
Steam regulator
Steam nozzle
Height-adjustable
coffee outlet
Handles
Removable drip tray
Ground coffee tank/
sugar cube compartment
Cup-warmer
Standby switch
Information screen
Touchscreen
Tray water level
indicator

5
6 ACCESSORIES
For your convenience, all the accessories are in a box with the
instructions handbook:
1. Ground coffee dispensing spoon. Capacity 8 g, approx.
2. Lime scale remover.
3. Cleaning brush.
4. Strip of reagent to check water hardness. Levels 1 to 5.
5. Brewing unit switch.
7 BREWING UNIT, THE HEART OF THE
COFFEE-MAKER
This super-automatic coffee-maker
has a professional unit manufactured
and developed by BIANCHI, the best
manufacturerofprofessionalmachines
(vending) in Italy. The brewing unit au-
tomatically prepares an excellent es-
presso coffee and deposits the grounds
in a compartment. It has been de-
signed for professional use and, conse-
quently, does not require maintenance
work until it has made 6,000 cups.
8 TOUCHSCREEN
1
2
3
4
5
P
V
Esc
Navigation button
Programme button
Preparation of 1
espresso coffee
Preparation of 2
espresso coffees
Light coffee
LCD display
Outlet
Hot water
Steam
Ground coffee
Preparation of
1 large coffee Strong coffee Preparation of 2 large coffees

9 INSTALLATION
If you find coffee grounds, it is because the coffee-maker has
been tested to make sure it works perfectly.
Before switching on the coffee-maker, make sure you have
removed the protection from the screen.
1. Fill the coffee bean tank with coffee beans (the tank has a
capacity for up to 250 g).
2. Fill the water tank to MAX level with clean, cool water. You
can fill it directly (a) or under the tap (b)
a) Lift the water b) Remove the tank by
tank cover. the handle.
When placing the tank back in position, make sure it fits into
the flap on the body, so that it is perfectly in place.
3. Connect the power cable.
4. Turn on the on/off switch at the rear of the coffee-maker.
Turn it to the “I” position to switch the coffee-maker on.
5. The standby button will come on (blue).
6. The first time you use the coffee-maker, its internal cir-
cuits need to be filled with water. The steam jet/hot water
regulator icon appears on the LCD screen to indicate that
the circuit needs to be filled.
IMPORTANT! Perform this operation BEFORE any other.
IMPORTANT! The circuit must be filled each time the steam
regulator icon appears on the display. This icon appears each
time the machine is PLUGGED IN.
7. Place a compartment (glass or jug) under the steam noz-
zle.
8. To fill the circuits with water, turn the steam regulator
anticlockwise as far as it will go.
9. Wait until water or steam comes out of the steam noz-
zle.
10. Close the steam regulator to complete the circuit filling
process.
11. Remove the compartment with the hot water.
12. The coffee-maker will turn off and is ready for use. Press
the standby button.
13. An hourglass will appear on the display to indicate that
the system is heating up.
14. The coffee-maker auto-cleans the pipes to remove pos-
sible remains of coffee or water. During this process, wa-
ter comes out of the coffee outlet. This enables you enjoy
a coffee made with clean, fresh water.
6

7
15. The coffee-maker will indicate when it is ready with a
beep and a hand will be displayed on the screen.
N.B. You can turn off the beep by proceeding as indicated in
chapter 18 PROGRAMMING YOUR COFFEE-MAKER.
10 SUGAR CUBE COMPARTMENT
If you normally use sugar cubes, you
can store them in the coffee-maker.
Lift the sugar cube compartment
cover and place the cubes inside. This
compartment can be removed for
cleaning and to make the filling proc-
ess easier.
IMPORTANT! Take care not to place
the sugar cubes in the ground coffee
dispenser by mistake.
11 ADJUSTMENTS
A) By adjusting the grinding level
You can regulate the size of the ground coffee.
This size has a direct effect on the coffee made
by the coffee-maker and it is advisable to test
the grinding level until you obtain the type of
grind you prefer. To adjust the grinding level, use the regula-
tor inside the coffee bean tank.
* Fine grind: The coffee will brew more slowly since it needs
more time and pressure to obtain the coffee. Turn the regula-
tor to the left (anticlockwise). The finer the grind, the creamier
the coffee will be.
important! If you grind the coffee too finely (grinding level
regulator full to the left), the coffee will brew very slowly.
* Coarse grind: The coffee will brew more quickly. Press and
turn the regulator to the right (clockwise).
IMPORTANT!
The adjustment must be made when the grinder is in op-
eration.
Use coffee bean blends specially prepared for espresso cof-
fee. If you do not obtain the desired result, try different blends
until you get the one you prefer. Store any coffee not placed
in the tank in a hermetically closed compartment in a cool
place.
IMPORTANT! Do not use high roast coffee; this type of
coffee is roasted with sugar (caramelised) and may dam-
age the coffee-maker.

B) Adjusting the amount of coffee
Before dispensing the coffee, choose the amount of coffee
you want to make, depending on whether you want a strong
or weak coffee.
If you want a weak coffee, press the button:
If you want a strong coffee, press the selector:
C) Adjusting the coffee outlet
The coffee outlet can be adjusted to different heights de-
pending on the size of the cups that are being used:
1. To use large cups, slide the coffee outlet up to the top posi-
tion.
2. To use espresso cups, slide the coffee outlet down to the
bottom position.
N.B. The coffee outlets can be removed for cleaning.
D) Adjusting the amount of water per cup
To adjust the amount of water per cup, press the following
buttons:
Espresso Large
coffee coffee
1 coffee cup
2 coffee cups
12 OBTAINING THE COFFEE
1. Check that the coffee-maker is ready.
2. Check that you have adjusted the coffee-maker to obtain
the coffee you prefer.
3. Place one or two warmed cups under the coffee outlet.
A) Coffee made from coffee beans
IMPORTANT! The first coffee you get from your coffee-
maker will not be good quality. Throw it away. This occurs
because the first time the grinder is used, it cannot load
the complete amount required by the brewing unit.
4. Press the button for the type of coffee you wish to obtain.
A frame will appear around the selected button to indicate
your selection.
Espresso Large
coffee coffee
1 coffee cup
2 coffee cups
8

9
5. Next, the coffee-maker performs a preliminary infusion of
the ground coffee. The coffee is injected with hot water,
which is distributed evenly around the coffee. The prelimi-
nary infusion obtains the maximum aroma and flavour of
the coffee. During the preliminary infusion, you will see
the following symbol on the screen:
6. During the extraction of the coffee, you will see the follow-
ing symbols on the screen:
1 coffee cup
2 coffee cups
7. When the coffee-maker finishers dispensing the coffee, it
will indicate that you can remove the cups through icons
and beeps, as long as you have the beeps option activated.
1 coffee cup
2 coffee cups
8. After dispensing the coffee, the coffee-maker is ready to
make more coffee.
B) Coffee made with ready-ground coffee.
This coffee-maker can use ready-ground coffee without
needing to use the grinder. This function is particularly useful
when making decaffeinated coffee.
1. Open the ground coffee dispenser cover.
2. Use the dispensing spoon to calculate the amount of
ground coffee. IMPORTANT! The maximum amount is
one flat spoonful of coffee (8 g). Then close the cover.
3. Press the ground coffee button. The frame around the icon
will light up.
4. Press the button for the coffee you want. The frame around
your selection will light up.
Espresso Large
coffee coffee
1 coffee cup
N.B. When you use ground coffee, you cannot make two cups
of coffee at the same time.
5. When the coffee-maker finishes dispensing the coffee,
you can remove the cup.
1 coffee cup
6. If you are not going to any make more cups of coffee using
ground coffee, press the ‘one coffee bean’ or ‘two coffee
beans’ button.
o
The frame around the ‘ground coffee’ icon will disappear.
IMPORTANT! While the coffee-maker is dispensing the coffee,
you can stop the extraction by pressing the ESCAPE button.
N.B. If the side door is opened or if the drip tray is removed dur-
ing the extraction or brewing process, the process will stop.

13 HOT WATER
1. Check that the coffee-maker is ready.
2. Place the glass or cup under the steam
nozzle.
3. Press the ‘hot water’ button. The hot water
symbol will appear inside a square frame.
The screen also indicates your selection:
4. Turn the steam regulator anticlockwise
as far as it will go (180°). Close it when
you have obtained sufficient hot wa-
ter.
5. Remove the glass or cup filled with hot
water.
6. Press the ‘hot water’ button or the ES-
CAPE button to disable this function.
The frame around the hot water symbol
will disappear.
o
7. The coffee-maker is ready to make coffee.
14 STEAM
1. Check that the coffee-maker is ready.
2. Place a glass or jug under the steam nozzle.
3. Press the ‘steam’ button. The frame around the steam sym-
bol will light up.
While the coffee-maker is heating up, the screen will display
the hourglass symbol:
When the coffee-maker is ready to obtain steam, the steam
symbol is displayed on the screen:
The maximum steam draw-off time is about 4 min.
4. Place a container under the steam nozzle and open it by
turning the steam regulator clockwise to empty any pos-
sible residual water that may have been left in the steam
nozzle. Close the steam nozzle and throw the water away.
5. Position the cup or jug with the liquid
that is to be heated up. To obtain steam,
turn the steam regulator anticlockwise.
Close the steam regulator when you
have finished heating up the liquid. N.B.
To heat up the milk and make it frothy,
move the cup or jug in circles.
6. Remove the cup or jug with the heated
liquid or frothy milk.
10

11
7. Press the ‘steam’ or ESCAPE button to turn off the steam.
The frame surrounding the steam will disappear.
o
8. The coffee-maker automatically stabilises the tempera-
ture inside the system. This automatic process takes ap-
proximately 25 seconds, during which water is expelled
through the coffee outlet.
The display shows the hourglass symbol:
9. The coffee-maker is ready to make coffee.
15 CAPPUCCINO
1. Fill a large cup up to 1/3 with cold milk.
2. Check that you have selected the steam func-
tion and that the coffee-maker is ready.
Steam ready:
3. Place a glass or jug under the steam
nozzle. Open the steam regulator to
empty any residual water that may have
been left in the steam nozzle. When
steam comes out, close the regulator.
4. Place the cup with the milk under the
steam nozzle.
5. Open the steam nozzle, turning the steam regulator.
6. Move the cup in circles to heat the milk evenly.
7. After heating the milk and making it frothy, close the steam
outlet.
8. Press the ‘steam’ or ESCAPE button. The frame around the
steam symbol goes off.
o
9. The coffee-maker automatically stabilises the temperature
inside the system. This automatic process takes approxi-
mately 25 seconds. During this process, you will see the
hourglass symbol on the screen and water will come out of
the coffee outlet.

10. The coffee-maker is ready to make coffee.
11. Place the cup with the frothy milk under the coffee out-
let.
12. Pour the coffee directly into the cup for a delicious cap-
puccino.
16 LIME SCALE REMOVAL
Lime scale should be removed regularly to clean the deposits
from the internal circuits of the coffee-maker. The frequency
with which your coffee-maker needs to be cleaned depends
on the hardness of the water you use. Consequently, you first
of all need to test the hardness of the water. To do this,
proceed as indicated in section 18 PROGRAMMING YOUR
COFFEE-MAKER.
IMPORTANT!! DO NOT USE VINEGAR OR ANY OTHER LIME
SCALE REMOVAL AGENT NOT SUPPLIED BY ESPRESSIONE IN
ANY CIRCUMSTANCES. You will find a sachet of lime scale re-
moval agent containing the exact amount for one removal
with the accessories to your coffee-maker.
1. The coffee-maker will indicate when the lime scale needs
to be removed from the circuits by displaying the follow-
ing symbols on the screen:
N.B. The lime scale removal process takes approximately 35
minutes and does not necessarily have to be carried out when
the coffee-maker displays the symbols. When this happens,
you can continue making coffee, but the appliance will indi-
cate the need for the lime scale removal. If this is not done, the
machine may become damaged.
2. Press the ‘P’ button to enter the programming menu.
3. Press the ‘arrow’ icon until the lime scale removal symbol is
displayed.
4. The lime scale removal symbol is displayed on the screen.
5. To select it, press the ‘P’ button again.
6. The coffee-maker tells you to fill the water tank before
beginning the lime scale removal process. Do not pour
water in yet; to remove the lime scale, you have to prepare
the removal solution.
7. Prepare the lime scale removal solution as indicated on the
sachet containing the removal agent supplied by us.
Pour the content into the water tank and add water up to
the lime scale removal mark on the tank.
8. Owing to the lengthiness of this process, you need to con-
firm that you want to carry it out at that time. Before con-
firming, make sure you have poured the removal agent
into the water tank.
12

13
a) To confirm the lime scale removal process, press the ‘P’
button.
b) To exit the process, press the ‘ESC’ button.
IMPORTANT! If you have poured the removal agent into the
water tank, remove it to make sure you do not use it by mis-
take to prepare a coffee.
N.B. if you exit the lime scale removal process once it has be-
gun, press the ESC button for the programme to continue the
rinse cycle. This will prevent traces of the removal agent re-
maining inside the appliance.
9. Once the lime scale removal process has been confirmed,
the coffee-maker will indicate that the process is starting
on the screen.
The duration of the process will be indicated on the bar that ap-
pears on the screen. The bar will complete as time progresses.
10. The screen will indicate the need to fill the water tank
with clean water and will tell you to empty the drip tray.
11. Empty the remaining water from the tank and fill it with
clean water. Empty the drip tray.
12. Once the lime scale removal process has finished, the
system must be rinsed to make sure that all remains of the
removal agent are removed. To rinse the appliance, press
the ‘P’ button again. .
13. The coffee-maker will indicate that the rinse process has
begun.
14. The bar will be completed as time progresses.
15. After the rinse process, the coffee-maker is ready to make
coffee..
N.B. The ‘no water’ icon may appear during the lime scale re-
moval and rinse processes. Once the water tank is filled, this
symbol will disappear and the process will continue.
17 CLEANING AND MAINTENANCE
IMPORTANT! Do not place the coffee-maker in water or any
other liquid or place any of its parts in a dishwasher.
IMPORTANT! Do not dry the coffee-maker or any of its parts
in an oven and/or microwave.
A) BASIC CLEANING
1. Turn off the coffee-maker (position ‘0’).
2. Unplug the coffee-maker.
3. Clean the water tank.

4. Remove the drip tray and empty it. Wash it with water.
5. Remove the grounds compartment (used coffee) and
empty it. Wash it with water.
6. Unscrew the steam nozzle together
with the outlet and clean all the parts. If
it is blocked, clean the air inlet hole of
the steam nozzle with a needle to opti-
mise the steam function. When putting
it back in place, make sure that this hole
is at the top of the steam nozzle.
7. Eliminate the coffee remains left in the coffee dispenser
with the brush.
8. Remove the sugar cube compartment and wash it with water.
9. Remove the coffee outlet and wash it with water.
IMPORTANT! The coffee-maker and its parts must be
cleaned at least once a week.
B) BREWING UNIT
This unit is a professional unit and does not need any special
maintenance until it has been operating for five years
(6,000 cups), when you should take the coffee-maker for
service by authorised personnel.
We recommend you clean the coffee-maker thoroughly every so
often, removing and cleaning the brewing unit every 1,000 cups
or whenever you consider that the coffee flow has decreased. To
do this, proceed as indicated in the following section.
In addition, we recommend you eliminate
any coffee remains that may have been left
in the piston filter using the brush included
in the accessories box.
CLEANING
1. Open the side cover.
2. Remove the grounds compartment.
3. Remove the coffee grounds collection tray.
4. Move the unit lever to the left.
5. Unscrew the top of the unit.
14

15
6. Remove the unit.
7. Wash the unit under the tap with plenty of hot water.
8. Wait until the unit is completely dry.
9. Replace the unit, making sure the indicated points coin-
cide.
10. Move the unit lever to the right.
11. Screw up the top of the unit.
12. Place the tray in position.
13. Place the grounds compartment in position.

14. Close the side cover.
IMPORTANT! When handling the unit for cleaning, the inter-
nal system that compacts the coffee may
move easily. To return it to its original posi-
tion, use the brewing unit spanner supplied
with the coffee-maker. Make sure that the
marks on the fixed and moving parts coin-
cide. If not, proceed as follows:
Insert the spanner in the lock.
Turn the spanner to the left (anticlockwise) until the two
marks on the fixed and moving parts coincide.
C) AUTO-CLEANING FUNCTION
The coffee-maker automatically performs three system-
cleaning processes:
1) When you turn on the coffee-maker, it cleans the pipes
with a little hot water to make sure that the coffee it makes
does not contain any traces of water left in the pipes from
coffee made previously.
2) Before turning off and to prevent the coffee outlet from
being blocked with coffee remains, the coffee-maker ex-
pels a little water and cleans the coffee outlet. This func-
tion has been designed to save you from having to carry
out this cleaning process manually.
3) If the auto-off function is disconnected, the coffee-maker
will perform auto-cleaning every 14 cups (when the
grounds compartment is emptied).
18 PROGRAMMING YOUR COFFEE-MAKER
The coffee-maker is programmed for use without it being
necessary to modify any parameters, but it offers the possibil-
ity of adapting it to your personal preferences easily and in-
tuitively. Consequently, we have designed a simple menu for
defining the various functions of the coffee-maker.
You can programme the amount of water per cup. By default,
the coffee-maker is programmed with a certain amount of
water for an espresso or large coffee. You can modify the
amount of water set for each type of coffee and adapt it to
your personal preferences.
The coffee-maker can turn itself off to save energy and you
can relax when you leave your home, knowing that it will
disconnect. Depending on the use you make of your coffee-
maker, you can programme the time when you want your
coffee-maker to turn off after it has been used.
The water in each area has a certain amount of lime that af-
fects the life of the coffee-maker. You can check the hardness
of the water you use and programme your coffee-maker to
tell you when the lime scale should be removed from the ap-
pliance. You can also select the contrast level of the screen
and whether or not you want the coffee-maker to beep to tell
you when the coffee or the steam is ready.
The following is a detailed explanation of how to use the pro-
gramming menu:
16

17
A) ADJUSTING THE AMOUNT OF WATER FOR AN ESPRESSO COFFEE
Sequence Press the button Message on screen
1. The coffee-maker is ready.
2. Press the ‘P’ button to enter the programming menu.
3. The first programme is for adjusting the amount of water per cup.
You can programme the amount for each type of coffee you can
obtain. To help you, the four possibilities will begin to flash.
4. To programme the amount of water for an espresso coffee, press the
corresponding button.
5. After pressing the button for 1 cup of espresso coffee, you enter the
menu for programming the amount of water.
Press the ‘arrow’ to increase the amount of water by 10 ml from 30 ml
to 60 ml.
By default, the coffee-maker is programmed with 40 ml for an es-
presso coffee.
6. To confirm your selection, press ‘P’.
To exit the programming mode, press ‘Esc’.
7. The coffee-maker is ready.

B) ADJUSTING THE AMOUNT OF WATER FOR 1 LARGE COFFEE
Sequence Press the button Message on screen
1. The coffee-maker is ready.
2. Press the ‘P’ button to enter the programming menu.
3. The first programme is for adjusting the amount of water per cup.
You can programme the amount for each type of coffee you can
obtain. To help you, the four possibilities will begin to flash.
4. To programme the amount of water for a large coffee, press the cor-
responding button.
5. After pressing the button for 1 large cup of coffee, you enter the
menu for programming the amount of water.
Press the ‘arrow’ to increase the amount of water from 60 ml to 150
ml.
By default, the coffee-maker is programmed with 60 ml for a large
cup of coffee.
6. To confirm your selection, press ‘P’.
To exit the programming mode, press ‘Esc’.
7. The coffee-maker is ready.
18
60 ml
90 ml
120 ml
150 ml

19
C) ADJUSTING THE AMOUNT OF WATER FOR 2 ESPRESSOS
Sequence Press the button Message on screen
1. The coffee-maker is ready.
2. Press the ‘P’ button to enter the programming menu.
3. The first programme is for adjusting the amount of water per cup.
You can programme the amount for each type of coffee you can
obtain. To help you, the four possibilities will begin to flash.
4. To programme the amount of water for 2 espresso coffees, press the
corresponding button.
5. After pressing the button for 2 espresso coffees, you enter the menu
for programming the amount of water.
Press the ‘arrow’ to increase the amount of water by 10 ml from 30 ml
to 60 ml.
By default, the coffee-maker is programmed with 40 ml for each cup
of espresso coffee.
6. To confirm your selection, press ‘P’.
To exit the programming mode, press ‘Esc’.
7. The coffee-maker is ready.