Established & Sons Ronan & Erwan Bouroullec User manual

GRID ROOM DIVIDER
Ronan & Erwan Bouroullec
ESTABLISHED & SONS
United Kingdom
Phone [phone]
establishedandsons.com
ESTANDSONS LTD
Estandsons Warehouse
Intereuropa d.d.
Mednarodni prehod 8,
SI-5290 Šempeter pri Gorici,
Slovenija

GRID ROOM DIVIDER
Ronan & Erwan Bouroullec
A colourful room-within-a-room, the raw shell of the GRID System provides a base for
modular seating, shelves, tables and screens, which can be integrated in dierent ways
to create a playful and multifunctional environment for informal meetings, presentations or
simply hanging out.
THE DESIGNER
Ronan & Erwan Bouroullec have been working together for over 20 years, bonded
by diligence and challenged by their distinct personalities. From designing spaces
to furniture, taking on architectural projects to designing textile wall systems or
comprehensive collections, the brothers maintain drawing and experimental activity
as essential to the development of their work. Their designs are part of select
international museums’ permanent collections, including the Musée National d’Art
Moderne, Centre Pompidou and the Musée des Arts Décoratifs in Paris, New York’s
MoMA, the Art Institute of Chicago, the Design Museum in London, and the Museum
Boijmans van Beuningen in Rotterdam.

General Information
DESIGN
2021
DIMENSIONS
L2486 × D600 × H1584mm
INSTRUCTIONS OF USE
GRID is designed and tested for L1 “general use” areas. Suitable environments for
this product include: oce buildings, showrooms, public halls, function rooms, cafés,
restaurants, canteens, banks and bars.
CLEANING GUIDELINES
Larch Veneered Plywood:
Clean with duster. Use a lint-free cloth with warm soap foam for tougher stains.
Avoid abrasive solvents, as they may damage the material. This product is for indoor
use only. For major maintenance or repairs, consult the retailer. Once the product or its
components are no longer used, make sure that they are disposed of correctly through the
public waste disposal services
Installation
Room Divider
Mesh
Room Divider
Panel
REQUIRED FOR INSTALLATION (PANEL)
REQUIRED FOR INSTALLATION (MESH)
20x Button
Head M6×16
20x Button
Head M6×16
28x Counter
Sunk M5×10
28x Counter
Sunk M5×10
12x Counter
Sunk M6×60
4x Feet Inserts
4x Feet Inserts
12x Cylindrical
Head M5x10
Combi Drill
Combi Drill
DESCRIPTION
Room Divider
MATERIALS
Powder-coated mild steel, Larch Veneered Plywood
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

1. Layout contents on a rug or soft surface to prevent scratching of the components.
Check the correct bolts are included before assembling.
2. Insert vertical wood locators into legs.
Take caution not to over tighten the M5×10mm Cylindrical Head bolts ( ! )
( ! )
Always use a minimum of THREE PEOPLE when assembling this Product. Always be mindful
of the weight of this product and take the necessary precautions during assembly to avoid any
harm. Always use a qualied person for the installation. Damaged parts of the furniture should be
exclusively replaced by the manufacturer or a qualied person. E&S declines all responsibility for
products that are modied.
INSTRUCTIONS FOR CORRECT INSTALLATION
Room Divider
Panel Only

3. Insert Plastic feet into the bottom of the legs. 4. Assemble side steel tubes with larch or upholstered panel.
Take caution not to over tighten the M6×60mm CSK bolts ( ! )
( ! )
Room Divider
Panel Only
Room Divider
Panel/Mesh

5. Insert the back and front legs
Take caution not to over tighten the M5×10mm bolts ( ! )
( ! )
Room Divider
Panel Only
6. Assemble back steel tubes with larch or upholstered panel.
Take caution not to over tighten the M6×60mm bolts ( ! )
( ! )
Room Divider
Panel/Mesh

7. Ensure the recommended amount of people are assisting for this step.
Insert the two side units into the back unit and lower front tube.
Take caution not to over tighten the M5×10mm bolts ( ! )
( ! )
Room Divider
Panel/Mesh Room Divider Panel/Mesh
Attach the brackets to the base of the frame. Ensure they
are in the correct position before tightening.
Take caution not to over tighten the M6×16mm Button Head bolts ( ! )
8.
( ! )
REQUIRED FOR INSTALLATION
10x Brackets12x CSK Bolts M5×10mm

9. Before placing the table top board, install the power and data units 10. Place the larch base panel. Ensure all bolts at the front, back and sides are screwed in.
Take caution not to over tighten the M6×16mm Button Head bolts ( ! )
( ! )
REQUIRED FOR INSTALLATION
12x PH Screw 2.5×15mm 10x Button Head Bolts M6×16mm
Room Divider
Panel/Mesh Room Divider Panel/Mesh

Room Divider
Mesh
Room Divider
Panel
Assembled Assembled

Established & Sons is a British brand representing all that is innovative
in contemporary design. By supporting the best creators of our time,
it has built a collection for people who are passionate about design,
presenting imaginative products with style and personality.
Designers and artists are aorded the freedom to explore their
own language, advancing pioneering ideas that deliver exceptional
furniture and lighting collections. Combined with Established & Sons’
commitment to skilled craftsmanship and cutting-edge manufacturing
techniques, this produces intelligent designs that are at the same time
diverse in the extreme and united in their quest for the extraordinary.
The Established & Sons collection includes some of the most important
examples of 21st-century design. Many of the pieces have been acquired
by international museums, galleries, institutions and private collections.
Follow us on Instagram
About Established & Sons