Established & Sons SURFACE TABLE User manual

SURFACE TABLE
Terence Woodgate/ John Bernard
ESTABLISHED & SONS
United Kingdom
Phone [phone]
establishedandsons.com
ESTANDSONS LTD
Estandsons Warehouse
Intereuropa d.d.
Mednarodni prehod 8,
SI-5290 Šempeter pri Gorici,
Slovenija

Bringing together the best of furniture and Formula 1 racing car design, the super-
slim 2mm edge and long span of the Surface Table is made possible by cutting-edge
engineering and carbon bre composite materials.
THE DESIGNER
A modernist at heart, Terence Woodgate is known for his simple, thoughtful and
understated designs. Woodgate works from his studio in the UK where he continues to
seek ways to distil the essentials of design. John Barnard is one of the most innovative
racing car design engineers of his generation. Uniquely he has been technical director⁄
chief designer at both Ferrari and McLaren.
SURFACE TABLE
Terence Woodgate/ John Bernard

General Information User Instructions
DESIGN
2009
DESCRIPTION
Table
DIMENSIONS
L2400mm x D1000mm x H720mm
L3000mm x D1000mm x H720mm
MATERIALS
Unidirectional carbon bre, lacquer, steel
NOTES
High gloss lacquer, satin matt lacquer
CLEANING GUIDELINES
Satin matt
The table should rst be dry dusted with a clean, cotton cloth. If wet cleaning is required,
the item should be cleaned without pressure using a soft, slightly damp microbre cloth
in a circular motion. A mild, non-coloured detergent, such as Ecover Washing Up liquid
can also be used. The table should be dried thoroughly following wet cleaning using a
dry,clean microbre cloth in order to avoid temporary streaking and residue.
High gloss lacquer
Same as above, however, if polishing is required, this can be done using a microbre cloth
with a small amount of non abrasive polish such as Auto Glym Super Resin polish. Lightly
apply in a circular motion and bu o using a dry, clean microbre cloth. Both the surface
of the table & the legs can be cleaned in this way.
Avoid contact with certain solvents, including white spirit, toluene based products and
acetone (Beware of many household cleaning products and polishes as these may contain
potentially damaging solvents).
USER INSTRUCTIONS
Please read this instruction manual in full prior to handling & installation Established &
Sons disclaims any responsibility deriving from incorrect use of the mentioned object
Please note 4 people are required for installation. Remove all jewellery and watches before
handling.
The product is not suitable for outdoor use.
Avoid contact with heat sources.
Do not stand or sit on the table.
Do not use sharp objects on the table.
For major maintenance and repairs, contact the retailer.
Please retain the crate for future transportation or long term storage. Do not pack or cover
the piece with any plastic covering.
Once the product or its components are no longer used, make sure that they are disposed
of correctly through the public waste disposal services.

Part A Part CPart B Part D Part E Part E
Installation 1. We advise that a clean blanket is laid on the oor to prevent damage to the surface of the
table top. Carefully uncrate and place in the prepared area with the bottom of the table
facing up. Screw part A in a clockwise direction into the corner tting. Slide part B over
part A in the orientation shown.

3.2. Insert part C into the end of part F and tighten by turning in a clockwise direction
using a 6mm allen key. Insert Part D into the top to nish. Repeat steps 1 - 4 for the
remaining 3 legs.
Carefully lift the assembled table and turn the right way up. Gently lower to the oor.
Fit part E over the parts already in place. Tighten by turning in a clockwise direction using
a 12mm spanner.
Slide part F over part E

Established & Sons is a British brand representing all that is innovative
in contemporary design. By supporting the best creators of our time,
it has built a collection for people who are passionate about design,
presenting imaginative products with style and personality.
Designers and artists are aorded the freedom to explore their
own language, advancing pioneering ideas that deliver exceptional
furniture and lighting collections. Combined with Established & Sons’
commitment to skilled craftsmanship and cutting-edge manufacturing
techniques, this produces intelligent designs that are at the same time
diverse in the extreme and united in their quest for the extraordinary.
The Established & Sons collection includes some of the most important
examples of 21st-century design. Many of the pieces have been acquired
by international museums, galleries, institutions and private collections.
Follow us on Instagram
About Established & Sons