Etac Star Mattress Overlay User manual

Owner’s Manual
-For-
Maress Overlay
Dynamic Air Flow
Users: Read instrucons before using product and
save this manual for future reference

About this manual
This manual contains informaon on the operaon and maintenance
of your Star maress. You must fully read these instrucons before
use. Star Cushion Products, Inc. is not responsible for any negave
results if the instructions are not followed. If you have any additional
questions within the USA, please contact Star Cushion.
Internationally, please contact your national distributor.
Table of Contents
Page 1: About this Manual/Table of Contents
Page 2: Intended Use
Page 3-5: Customer Responsibilies/Cauons
Page 5: Product Specicaons
Page 6: What is Included
Page 7-8: Instrucons for Use
Page 8-9: Cover Use and Removal
Page 10-11: Cleaning and Disinfecon Instrucons
Page 12: Warranty/Returns
Page 13: Troubleshoong/Disposal
Page 14: Contact Information
Products in this manual may be covered by one or more U.S. and foreign patents and
trademarks. For further details, please refer to www.starcushion.com.
Star Cushion Products has a policy of connual product improvement, and thus may amend this
document. For a current version of this document, please visit www.starcushion.com.
1

2
Intended Use:
The StarMatt Mattress Overlay is a non-powered, adjustable, zoned, air-
filled cellular design full support surface. The StarMatt Mattress Overlay
utilizes dynamic air flow technology and is intended to conform to an
individual’s shape upon immersion to provide skin/soft tissue protection and
an environment to facilitate wound healing of wounds up to Category IV.
The StarMatt Mattress Overlay is designed to be used on top of a standard
hospital, nursing home, long-term care facility, home care or consumer
mattress. There is no weight limit to the StarMatt Mattress Overlay so long
as the overlay is properly sized to the individual and the underlying mattress.
Star Cushion Products, Inc. recommends evaluation by a clinician or
healthcare professional as a part of an overall care program based
on the individual’s medical and therapeutic needs.

3
Customer Responsibilies:
- Carefully read and follow all the instrucons provided in this manual
- Follow a regular roune in examining and adjusng the maress for proper
inaon and immersion, recommended at least daily.
- If you are unable to perform any of the tasks described in this manual, seek
assistance
- If you need further assistance with understanding the tasks described in
this manual, seek assistance from a clinician or healthcare professional with
experience using a variety of support surfaces.
Cauons:
Check in lation: At least once per day, per section, of the mattress overlay.
Check Skin: Check skin frequently, at least once per day. Skin and soft tissue
breakdown can occur due to many reasons, which may vary by individual.
Redness, bruising, or discolored skin may indicate the beginning of soft
tissue or skin breakdown. If this occurs, consult with a clinician immediately.
Turning & Repositioning: The support surfaces should not be a substitute
for the individual’s care regimen, but instead should supplement existing
needs. Consult a clinician or healthcare professional with regards to the
frequency and need to turn and reposition the individual.
Snaps: Make sure the sections of the product are snapped together before
and during use.
Product Orientation: The product must be used with the air cells facing
upwards. If the air cells are not facing up, it may reduce or eliminate the
support surface’s benefits and could increase risk to the skin and other soft
tissue.
Overlay and Mattress Orientation: The overlay should be correctly sized to
the bed mattress and to the individual using it. If not, it may reduce or
eliminate the support surface’s benefits and could increase risk to the skin
and other soft tissue.
Set Up: The product should be set up by knowledgeable caregivers who are
properly trained in the use of the product.

4
Under-inflation: DO NOT USE an under-inflated product. Insufficient
inflation or loss of mattress air may cause lack of body support. It is
important that you are immersed into the mattress, but not resting on the
base or bottom of the mattress, as it can result in peak pressure areas.
Prolonged exposure to peak pressures could increase risk of breakdown to
the skin and other soft tissue.
Over-inflation: DO NOT USE an over-inflated product. If the support
surface remains over-inflated for daily use, the body will not immerse into
the cells, which may reduce or eliminate the product’s benefits, and
increase risk of breakdown to the skin and other soft tissue.
Climate: If the product has been in temperatures less than 32°F / 0°C and
exhibits unusual stiffness, allow the product to warm to room temperature.
Then, knead the air cells with your hands, or roll up the product and then
unroll it (with the valve open until the neoprene is soft and pliable again.
Repeat proper adjustment instructions before using. Avoid extreme heat
and keep away from heat sources, hot ashes, or open flames.
Pressure: Changes in altitude may require you to readjust your product for
proper inflation. Check inflation each time you change altitude.
Puncture: In order to prevent your product from being punctured, keep it
away from sharp objects.
Handling: DO NOT attempt to carry your product by the valve(s or pull the
product by the valve(s. Lift underneath the base of the support surface
section to carry.
Obstructions: DO NOT place any unneeded obstructions between the user
and the support surface, and use as few linens as necessary, as this may
reduce or eliminate the product’s benefits and increase the risk of skin or
soft tissue breakdown.
Instability/Fall Hazard: DO NOT use your product in conjunction with, or
place on top of any other products or materials, except as listed in the
Intended Use section. This may result in instability and/or falls.
Oil-Based Lotions: Do not let oil-based lotions or lanolin come into contact
with the product, as it may degrade the neoprene.
Sunlight: Prolonged exposure to sunlight or ozone can degrade the
neoprene and may lessen the effectiveness of the product.

5
Entrapment/Fall Risks: The use of side rails on beds has been determined
by governmental safety agencies as creang a risk of life-threatening
entrapment which endangers the individual. The use of side rails is not a
requirement for the proper use of a StarMa Maress Overlay. However,
if clinically indicated after consultation with applicable health care laws and
regulations, as well as a clinical assessment by a trained healthcare
professional, then the health care professional must consider the risk of
entrap-ment in using the StarMatt Mattress Overlay on a mattress with side
rails present and take steps to minimize such a risk. In the event side rails
are not present, the health care professional must consider the risks
associated with the individual falling out of bed, and take steps to minimize
such risks. For more information on the safety concerns involved with bed
rails and risk of entrapment, please visit www.fda.gov.
Product Specicaons:
The products addressed in this manual are made of latex-free neoprene rubber with
a urethane base and electroplated copper valves. These products, when used and
maintained properly (including minor repairs), are expected to last 5 years.
Product Dimensions (cm) Dimensions (in) Weight
Maress Overlay (Single
Secon)
86 x 49 x 10 33.75 x 19.25 x 4 3,25 kg
Maress Overlay
(4 secons)
86 x 191 x 10 33.75 x 75 x 4 13 kg
Bariatric Overlay To t To t Varies
Foam Replacement
Insert Secon
86 x 49 x 10 33.75 x 19.25 x 4 2,6 kg

6
What is included:
A – Mattress overlay sections: Each mattress overlay section has dimensions
86x49x10 cm (33.75" x 19.25" x 4")
B – Complete maress overlay: 4 air cell maress overlay secons are included.
Within each secon, each air cell is connected to each other and allows the air within
the cells to be distributed evenly across the whole secon.
C – Snaps: Each maress overlay secon has snaps which allow the secons to be
snapped together to form an enre maress overlay
D – Inaon Valve(s): supports the ow of air into and out of the maress secon
E - Pump: dual action pump to inflate the air cells through the inflation valve
F - Repair Kit: Minor punctures to your cushion can be easily repaired with the repair
kit. The repair kit contains 3 patches, sandpaper, 3 toothpicks, and an instruction
card.
G – Owner’s Manual
H – OPTIONAL: Foam replacement insert section, incontinence cover
B
E
F
G

7
Instrucons for Use:
Please read the instrucons carefully and follow guidelines to properly adjust your
Star Maress Overlay. Failure to comply with the instrucons may cause improper
inaon of this dynamic airow product, resulng in a loss of therapeuc value.
Inang the Maress:
1. Remove all bed linens except the support mattress pad or sheet from
existing bed mattress. Place the Mattress Overlay sections with the air cells
facing up, on the top of the bed mattress. Align the sections and snap them
together.
2. Turn the silver tip valve counterclockwise to open. Only open one valve per
section, keep the other valve closed. Do not apply pressure when opening
and closing valve. The valve maintains a tight seal with little effort.
3. Attach the rubber hose end of the black hand pump to the open valve.
Be sure the pump hose is placed tightly over the valve.
4. With the pump attached, pump to moderate inflation.
Note: Moderate inflation is achieved when the center of the mattress section
begins to arch.
5. Turn the valve clockwise to close. Remove the pump. Repeat steps 2-4 for
remaining mattress sections.

8
Personalizing the Inaon of Your Maress:
6. Reapply bed linens (Maximum one sheet, one draw sheet, or one
incontinent pad). Place the individual on the Mattress Overlay in their
normal ly-ing position. NOTE: If the individual will be lying in the side
position at any time while on the mattress, Star recommends that the
inflation adjustment be performed while the user is in the side position, as
this position typically has a greater immersion need.
7. To adjust for the proper immersion level of each mattress overlay section,
slide your hand between the product surface and the individual’s lowest
bony prominence. Turn the valve counterclockwise to open, and release
air until the area of high risk is ¾ in. to 1 in. (2-3 cm) from the base of the
mattress section. Turn the valve clockwise to close. Repeat step 7 for the
remaining mattress overlay sections.
Linens:
Too many linens between the product and the individual will compromise skin
protecon performance, prevent the individual from sinking in, and reduce pressure
distribuon.
It is recommended that a maximum of:
• One at or contoured sheet, arranged loosely over the Maress
Overlay.
• If needed, a draw sheet for moving and transferring can be used.
• If needed, one inconnent pad can be used.
Posioning:
Special Posioning: For an individual with special posioning needs while lying on
their side or back, a pillow or other posioning device can be placed beneath the
Maress Overlay. Before placing any pillows, you must consult with your clinician or
healthcare provider.
Pillows:
NOTE: If the individual desires to use a head pillow, Star recommends placing
the pillow underneath the head section of the mattress instead of on top of the
mattress section, as this has been shown to better reduce peak pressure points.

9
Cover Use and Removal:
Overlay Cover Aachment:
1. Remove all bed linens, except the support mattress pad or sheet, from
the existing bed mattress.
2. Referring to the directional labels, place the cover on top of the bed
mattress, unzip one side fully, and fold the cover top to one side.
3. Place the mattress overlay with the air cells facing upwards inside the
cover. Align the mattress overlay sections and snap them together.
4. Follow the inflation steps in the Instructions for Use (Steps 1-5) of these
instructions to inflate the mattress overlay.
5. Re-fold the cover top.
6. Reapply the bed linens, if needed (maximum one sheet, one draw sheet,
or one incontinent pad).
7. Place the individual on the mattress overlay in their normal lying
position.
8. Follow the immersion steps in the Instructions for Use (Steps 6-7) to
properly immerse the individual.
9. One the proper immersion is achieved, zip the cover closed.
Overlay Cover Removal:
To Remove the Maress Overlay and Overlay Cover TOGETHER:
1. Transfer the individual to a dierence surface.
2. Unbuckle and remove the cover from the bed with the maress overlay
sll enclosed.
NOTE: If placing the individual back on the maress overlay, unzip the cover ensure
the secons are sll snapped together and lying at. Then ensure proper inaon.
To Remove the Maress Overlay and Overlay Enclosure Cover SEPERATELY:
1. Transfer the individual to a dierent surface
2. Unzip one side of the cover
3. Unsnap and remove the maress overlay secons from the cover.
4. Unbuckle the cover from the bed maress and remove the cover from
the bed maress.

10
Cover Cleaning and Disinfecng Instrucons:
To Clean the Cover: Remove the cover. Machine wash, gentle cycle, in warm water
(max 140°F or 60°C) with a mild detergent, with like colors. No Bleach. Rinse in cold
water and machine dry on low temperature or line dry.
To Disinfect the Cover: The cover can be machine washed in hot water (60°C) to
disinfect. Tumble dry low. Quaternary-type disinfectants may also be used in
concentrations recommended by the manufacturer. Rinse thoroughly.
Star Cushion Products, Inc. is not responsible for any damage that may occur from
your washing machine or dryer.
Maress Cleaning and Disinfecng Instrucons:
Before cleaning/disinfecng, remove the cover and wash separately.
Cleaning is the removal of soil, dirt and organic maer from the product.
Disinfecng is the eliminaon of pathogenic microorganisms.
Cleaning must precede disinfection.
To Clean the Air Cells: Close the mattress overlay section’s valve(s). Using a
washcloth, sponge, and/or soft bristle brush, hand wash the air cells in lukewarm
water with a liquid dish washing detergent, laundry detergent, soap, or general
purpose housekeeping cleaning products. (DO NOT USE automatic dishwasher
detergents which are too caustic for personal safety) If necessary, dilute following the
product label directions for surface cleaning. Make sure to thoroughly scrub all of
the air cells and spaces between. Rinse completely with fresh water. Allow the
cushion to dry for approximately 15 minutes. If not completely dry, use a towel to
spot dry your cushion. DO NOT PLACE YOUR STAR CUSHION IN A CLOTHES
WASHER OR DRYER, OR HEAT ABOVE 100* FARENHEIT (37*C).

11
To Disinfect the Air Cells: Periodic cleaning is all that is recommended unless there
is a known infecon or an open wound. If disinfecon is desired, follow the above
cleaning instructions using a solution of 1 part household liquid chlorine bleach to
9 parts warm water. Soak the product for 10 minutes in the solution, rinse
completely, and dry thoroughly. Do Not Use Undiluted Bleach!
Note: Most germicidal disinfectants are safe if used following the disinfectant
manufacturer’s dilution directions.
DO NOT:
- machine wash or machine dry the mattress.
- use abrasives such as steel wool or scouring pads.
- use cleaning products containing petroleum or organic solvents.
- allow water or cleaning solution to enter the product (make sure the
valve(s) are closed tightly before starting).
- expose the product to ultraviolet light or ozone gas cleaning
methods.
- use oil-based lotions, lanolin, or phenolic-based disinfectants on your
product, as they may compromise the integrity of the material.
To Sterilize the Mattress: Follow Cleaning and Disinfection guidelines above. Star
Cushion’s products are not packaged in a sterile condition nor are they intended
or required to be sterilized prior to usage. High temperatures can accelerate aging
of the product and may cause damage or failure. If institution protocol demands
sterilization, open the valve(s) and use the lowest temperature possible for the
shortest time possible. Neither are recommended, but gas sterilization is
preferable to steam autoclave. In any process using pressure, ensure all valves are
open to prevent damage to the product. Star Cushion Products, Inc. highly
discourages sterilization methods using temperatures greater than 180° F (82° C)
for air-adjust-able products.
Deodorizing: To deodorize products mix one tablespoon of baking soda per quart
of water (25 gm/l) in 10 parts water. Soak for several hours, rinse and let dry. This
may need to be repeated several times. Clean product frequently or use an
incontinent covering to avoid strong odors and staining.

12
Warranty:
Limited Two Year Warranty on Maress
Limited Thirty Day Warranty on Maress Cover
Star Cushion warrants your maress overlay secons for a period of two years from
the date of purchase, and the exterior cover for thirty days from the date of purchase
to be free of defects in material and/or workmanship.
What is NOT covered by the warranty:
1. Necessary replacement or repair that has been caused by improper
usage, abuse, negligence, or punctures from outside objects.
2. Daily wear and tear, or damage that is a result of disregarding the
specic direcons contained in this instrucon manual.
Warrantor is not responsible for consequenal damages or incidental damages.
Star Cushion requires proof of original purchase date, such as your original sales slip
to establish warranty period.
Warranty service is available by returning the maress overlay secons and/or cover,
at your expense to:
Star Cushion Products, Inc.
An: Repairs
5 Commerce Drive
Freeburg, IL 62243
Some states do not allow limitaons on how long an implied warranty lasts, so the
above limitaon may not apply to you. All implied warranes with respect to this
product are limited to two years from the date of purchase for the maress overlay
secon and thirty (30) days for the cover.
This warranty gives you specic legal rights and you may also have other rights that
may vary from state to state.
Internaonal Warranty: Please contact your local distributor. A list of distributors
can be found at www.starcushion.com or if you cannot nd a distributor contact Star
Cushion (see Contact Informaon).
Returns:
All products returned must be new and unused, require prior authorizaon from Star
Cushion Products, Inc. and are subject to a restocking charge. Before returning your
product in the U.S.A., contact our Warranty Service Department.

13
Troubleshoong:
Not Holding Air:
1. Open valve(s) by turning counter clockwise and add air to the
mattress using your black hand pump.
2. Close valve(s) tightly by turning valves clockwise.
If still not holding air:
3. Visibly check to see if there are any holes. If no holes are visible,
immerse mattress section (with the valves tightly closed) in sink or tub of
water and look for air bubbles.
- If pin-hole sized holes are found, use the repair kit that
came with your product and follow the repair kit
instructions.
- If large holes or other leaks are found, see Warranty
Section.
Uncomfortable/Unstable:
- Make sure maress secon is not over-inated. (see Instrucons for Use).
- Make sure the air cells and the cover are facing “UP.”
Allow the user to lie on the product for a minimum of one hour to get use to the
texture of the product’s surface and immersion into the air cells.
Disposal:
There are no known environmental hazards associated with the components of the
products in this manual when properly used and disposed. Dispose of the product
and/or components in accordance with the applicable regulaons in your jurisdicon.
DO NOT INCINERATE.

14
Contact Informaon:
In the U.S.A:
Star Cushion Products, Inc. Customer Care and Warranty Service:
Phone: [phone]
Fax: [phone]
www.starcushion.com
Customer Care/Warranty Service: [email protected]
Note: If directed to return any items, please send to:
Star Cushion Products, Inc.
5 Commerce Drive
Freeburg, IL 62243
Outside the U.S.A.:
Star Cushion International: [email protected]
Or visit www.starcushion.com or www.etac.com for a list of Star Cushion
International distributors.
Etac Sverige AB
Box 203,
334 24 Anderstorp
Sverige
Tel [phone]
Fax [phone]
[e-mail]
www.etac.se
Etac AB (export)
Box 203
334 24 Anderstorp
Sverige
Tel [phone]
Fax [phone]
[e-mail]
www.etac.com
Etac A/S
Egeskovvej 12,
8700 Horsens, DK
Tel [phone]
Fax [phone]
[e-mail]
www.etac.dk
Etac GMBH
Bahnhofstraße 131,
45770 Marl, D
Tel [phone]
Fax [phone]
[e-mail]
www.etac.de
Etac Holland BV
Tinweg 8
8445PD Heerenveen, NL
Tel [phone]
Fax [phone]
[e-mail]
www.etac.com
Members of the Etac Group
R82 UK Ltd.
Unit D4A, Coombswood
Business Park East
Coombswood Way,
Halesowen
West Midlands B62 8BH
England
Tel. [phone] Fax. 0121
559 5437
[email protected]
www.etac.com/uk

Manufacturer:
Star Cushion Products, Inc.
5 Commerce Drive
Freeburg, IL 62243
Phone: [phone]
Toll Free: [phone]
Fax: [phone]
[email protected]
www.StarCushion.com
Etac Supply Center AB
Långgatan 12
33424 Anderstorp
Sweden
Control Document
QF 71-29
last updated 11/19/2019
EC REP