Etac Turner PRO User manual

Turner PRO
User manual
BM61099 Rev C 2016-03-07

Contents
User manual - English - 4
Bruksanvisning - Svenska - 8
Brukermanual - Norsk - 12
Brugsvejledning - Dansk - 16
Käyttöohje - Suomi - 20
Gebrauchsanweisung - Deutsch - 24
Handleiding - Nederlands - 28
Manual d`utilisation - Francais - 32
Manual utente - Italiano - 36
Manual de usuarioo - Español - 40

4
Etac Turner PRO / www.etac.com
Only technical personnel are allowed to
perform repairs.
Modifications and use of components made by other manufacturers:
We recommend only using Etac components and spare parts.
Declaration of conformity is not valid and Etac is not responsible
for warranty if any modifications are made to the product. Etac
shall not be liable for faults or accidents that can occur when
using components made by other manufacturers.
Assess the risk and take notes.
You as the assistant are responsible for the safety of the user!
Important
This User Manual contains important safety instructions and
information regarding the use of the Turner PRO and accessories.
In this manual the user is the person being transferred.
The assistant is the person operating the Turner PRO.
This symbol indicates important information
related to safety. Follow these instructions
carefully.
Visit www.etac.com to download the latest version of our
doccumentation.
Conditions for Use:
Transferring a person may pose an element of risk. Only trained
personnel should use the equipment covered by this user manual.
Warranty:
2-year warranty against defects in workmanship and materials of
the product. For Terms and conditions,
see www.etac.com
Declaration of conformity
The Turner PRO described in this user manual
is CE marked in accordance with EU Council
Directive 93/42/EEC concerning medical devices,
class 1, and has been tested according to standard
SS-EN12182:2012
Labels and symbols
Turner PRO - intended use
General
Read User Manual before use!
It is important to fully understand the con-
tent of the user manual before attempting to
use the equipment.
CE marked
Refer to user manual
70
10
Max temperature
when washing
200 441
Max user weight (SWL)
ph when washing
Turner PRO
Inner pole with handle
Turning knob
Leg support
Bolts
Transport wheels
Main plate
Product label
Height label
Outer pole
Lock pin
Short user guide
Art.no. 16090106 xxxxxSerial no.
(01)07071865105783(11)YYMMDD(21)xxxxx
Etac Turner PRO
Etac AS Supply Gjøvik
Hadelandsveien 2
NO-2816 Gjøvik Norway
Product label:
The label contains art. number
and serial number (bar codes).
The EAN code contains;
(01) (EAN no.): xxxxxxxxxxxxxx
(11) (Batch): YYMMDD
(21) (Serial number): xxxxx
Symbols:
Symbols used on the product,
explained in more detail:
Assistant footrest
Risk assessment
Short user guide:
Turner Pro is a sit-to-stand transfer aid that makes it easier for
a carer to help a user to stand and transfer him/her to another
sitting position. Users must be able to grip and pull up their own
body weight, but still require support/help to stand up and be
turned. The purpose is to transfer a person from/to bed, chair,
wheelchair or toilet. The Turner PRO is lightweight and easy to
move around. The Turner PRO should only be used indoor on flat
surfaces.

5
Etac Turner PRO / www.etac.com
Material:
Powder coated aluminum,
Plastic, Steel.
Expected Lifetime:
The Turner PRO has an
expected lifetime of 5
years or 15000 turning cycles
Safe Working Load (SWL):
200 kg (441 lbs)
Weight of unit:
8kg
Dimensions:
Height(A): 0,8-1,2 m
Height (B): 0,3-0,55 m
Depht (C): 0,46 m
With (D): 0,45 m
Footplate (Ø): 0,40 m
Technical data
Supplied parts
Mounting leg support
Mounting pole to main plate
Mounting handle
1x
1x 1x
1x
1x
1x
3x
1x
Make sure that all three bolts are properly
fastened. Loose bolts can make the pole
wobbly and the Turner PRO unsafe to use.
CLICK!
A max
A min
B max
B min
C
DØ
The handle has step-less adjustment from 0,8 to 1,2 meters.
Follow these three steps when mounting the handle:
12
The knee cushions are adjusted individually. The leg support has step-less
adjustment from 0,3 to 0,55 meters. Follow these two steps when
mounting the leg support:
Lay the pole down on an even surface.
Insert leg support with kneepads
pointing upwards. Make sure both knobs
are on the same side.
Tighten knob by turning
knob clockwise.
Place the base plate on an
even surface. Insert pole
with knee pads facing
away from the wheels.
Insert all three screws into holes in the base
plate. Use allen key to screw in bolts. Tighten
bolts firmly.
1 2
CLICK!
CLICK!
Place the handle
with the lock-pin
pointing towards
the wheels.
Press in the lock pin
and slide the pole
into the mounted
pole.
There will be a clicking sound
when it is correctly mounted.
Turn and tighten the knob.
1 2 3
1x
1x 1x
1x
1x
1x
3x
1x
1x
1x 1x
1x
1x
1x
3x
1x
1x
1x 1x
1x
1x
1x
3x
1x
Outer pole Inner pole with handle
Allen key
Turning knob
Screws
User manual
Leg support
Main plate
1x
1x 1x
1x
1x
1x
3x
1x
ENSVNODAFIDENLFRITES

6
Etac Turner PRO / www.etac.com
Adjusting handle height
Adjusting leg support height
30
35
45
50
40
55
Be aware of handle when adjusting height.
Handle can slide down and hit operators
head or upper body.
Don`t use handle in a position above the lock
pin position. This makes the pole wobbly and
the Turner unsafe to use.
Make sure knobs are securely tightened. Lose
knobs can cause handle or knee support to
slide down and make the Turner unsafe to use.
Checklist after assembly
Don`t start using Turner PRO before completing
the checklist after assembly.
Use this checklist to verify that the Turner PRO is properly installed and
can operate correctly and safely before use. See assembly information on
the previous page for details.
Positioning Turner PRO
3
2
1
4
Position the new seat (chair,
wheelchair, toilet or bed) in
an 90 degree angle with the
existing seat.
Slide the Turner PRO in under
the users feet.
Adjust the height of the leg
support so it is positioned two
fingers beneth the users knee
cap.
Adjust the height of the handle
to a position that is comfortable
for both user and assistant.
Turn knob counter
clockwise and
adjust handle
height.
Push the lock pin in
if the handle is in
upper position.
When correct handle
height is obtained,
turn knob clockwise
to lock the position.
1 2 3
30
35
45
50
40
55
30
35
45
50
40
55
1 2 3
Turn knob anti
clockwise and
adjust knee
support height.
When correct
knee support
height is obtained,
turn knob
clockwise to lock
the position.
The knee support height
can be read from the scale
on the pole. The number
above the leg support
bracket referes to the
correct height.
Make sure that the leg support is mounted correctly.
Make sure that all three bolts between outer pole and
main plate are mounted correctly and properly tightened.
Make sure that the handle (inner pole) is mounted
correctly.
Make sure Turner rotates freely.

7
Etac Turner PRO / www.etac.com
Transport and storage
Turner PRO can be stored and transported under temperatures
between -25 - 70 °C and relative humidity between 15 - 93 %
Don`t use the Turner Pro for transportation
of people or goods.
Cleaning and disinfection
Clean on a regular basis. Clean surfaces with a damp cloth
using an appropriate pH-neutral detergent. Do not use solvents
or strong liquids, this may damage surfaces on the Turner. For
disinfection when needed; use isopropyl alcohol or similar. Avoid
abrasive cleaning products. Remove hair and pile from the wheels
and verify that the wheels rotates freely.
Make sure not to damage or remove labels
when cleaning.
Reconditioning
Follow cleaning and assembly procedure. Separate reconditioning
document is available at Etac.com.
Spare parts
A list of spare parts is available at Etac.com.
Recycling
Turner PRO can be disposed of as metal waste. Recycling instruc-
tions is available at Etac.com
Transfering user
3
21
4
Grip the handle with both
hands and place one foot on
the foot rest. The user grips the
handle, if possible with both
hands.
Encourage the user to stand
up, at the same time, coun-
ter-balancing the users weight
using a foot and hands (use
your bodyweight by leaning
backwards).
Twist the Turner PRO so that
the user is transferred to the
front of the new seat.
Step on footrest, brace your
weight and ask the user to sit
down. Maintain eye contact
with the user during the entire
transfer prococess.
The assistant has to be able to handle the
weight of the user.
User / Assistant
Make sure the users weight is within the
baseplate.
ENSVNODAFIDENLFRITES