Etec E6032S User manual

Maximum Weight Capacity:
Mount: 120 Lbs
Top Shelf: 100 Lbs
Middle Shelf: 40 Lbs
Bottom Shelf: 50 Lbs
MODEL E6032S
ASSEMBLY INSTRUCTIONS
Important! Read all warnings before starting assembly.
Supports VESA Sizes up to: 600x400
For technical assistance or troubleshooting please
call 1-855-994-3832 or visit www.sibrandssupport.com

E6032S2
READ THIS FIRST!
Read all of the warnings and cautions contained
in this manual before assembly.
• Do not attempt to assemble this product if you
do not understand the instructions.
• Contact a professional if you have any doubts
about safe and secure TV furniture assembly.
• Check all the parts carefully to make sure there
are no missing or damaged parts.
• Improper assembly may result in damage to
your TV, property, and personal injury.
• This product is intended only to support a
television of the indicated size and weight
combination. Using this product to support
televisions heavier than the maximum weight
capacity can damage product and cause
personal injury.
• Schoenfeld International Inc. and ETEC are not
responsible for any personal injury or product
damage due to mishandling, incorrect mount-
ing, incorrect assembly or incorrect use of this
product.
CHILD SAFETY WARNINGS
How and where you use your television stand is
extremely important for Child Safety
As you set up and use your new product, keep all
of these safety tips in mind
! Don't let children climb on or play with enter-
tainment system furniture and TVs.
! Remember that children can become excited
while watching a program, especially on a
"larger than life" TV. Make sure to place or
install the TV stand where it cannot be pushed,
pulled over, or knocked down.
! Make sure that you route all cords and cables
so that they cannot be pulled or grabbed by
curious children.
WARNINGS
• This product is intended only to mount a televi-
sion of the indicated size and weight combina-
tion. Using this product to support televisions
or other products heavier than the maximum
weight capacity can damage equipment and
cause personal injury.
• Schoenfeld International Inc. and ETEC are not
responsible for any personal injury or product
damage due to mishandling, incorrect mount-
ing, incorrect assembly or incorrect use of this
product.
• Do not force the bolts into the hole or use an
electric drill to fasten any bolts. This could
damage the equipment or cause personal
injury.
• A large television requires two people to lift.
Schoenfeld International and ETEC are not
responsible for equipment damage or personal
injury due to mishandling.
• Do not release the TV until you are sure that it
is securely mounted. Releasing the TV without
first ensuring that it is securely installed can
result in equipment damage or personal injury.
CAUTION:
• Do not place the TV face down on a hard
surface when installing the mounting plate on
the TV. Placing the TV face down on a hard
surface can result in equipment damage. Use
a blanket or other suitable surface.
• Check with your TV manual or manufacturer to
confirm the required bolt diameter according to
the size, depth, and position of the mounting
holes in your TV.
FOR YOUR SAFETY, PLEASE FOLLOW
THESE PRECAUTIONS:
Always remove the TV and other equipment
from the furniture prior to moving the
assembled unit.

E6032S 3
! Be careful when moving the assembled furni-
ture after the glass shelf has been installed, or
when there is equipment of any kind located
on the furniture as this may cause the shelves
and other parts to become unstable and fall.
! When in use, this furniture must be placed on
a flat, level and solid surface.
! Do not lean on or place any force on the TV
when it is on the TV stand.
! Do not climb or step on the stand
.
! Do not bang into or place your own weight on
the glass sheves
! Do not place any items on the shelves or
mounts which may exceed the maximum
weight limits.
! Always place the heaviest component (except
for your TV) on the bottom shelf
Schoenfeld International Inc. and ETEC will not
be responsible for failure to assemble as directed
or for the improper assembly, use or handling of
this stand
VEILLER Á RESPECTER CES MESURES DE
PRECAUTION!
TOUJOURS ENLEVER LE TÉLÉVISEUR ET
AUTRE ÉQUIPEMENT AVANT DE DÉPLACER
LE MEUBLE ASSEMBLÉ.
! DÉPLACER LE MEUBLE AVEC PRÉCAUTION
UNE FOIS QUE LE PLATEAU EN VERRE A
ÉTÉ POSÉ OU LORSQU’IL Y A DU MATERIEL
PLACÉ SUR LE MEUBLE CAR CELA PEUT
CAUSER LE DÉCROCHEMENT ET LA CHUTE
DES PLATEAUX ET AUTRES ÉLÉMENTS.
! DURANT L’UTILISATION, LE MEUBLE DOIT
ÉTRE POSÉ SUR UNE SURFACE PLATE,
SOLIDE ET HORIZONTALE.
! NE PAS S'APPUYER CONTRE LE TÉLÉVI-
SEUR LORSQU'IL EST POSÉ SUR LE
MEUBLE.
! NE PAS GRIMPER NI MARCHER SUR LE
MEUBLE.
! NE PAS TAPER NI S'APPUYER SUR LE PLA-
TEAU EN VERRE
Schoenfeld International Inc. y ETEC decline toute
responsabilité en cas d’assemblage non conforme
aux instructions ou pour l’assemblage, l'utilisation
ou la manutention incorrects de ce meuble.
POR SU SEGURIDAD TENGA LAS SIGUIENTES
PRECAUCIONES:
! SIEMPRE QUITE EL TELEVISOR Y CUAL-
QUIER OTRO EQUIPO DEL MUEBLE ANTES
DE MOVER LA UNIDAD ARMADA.
! TENGA CUIDADO AL MOVER LA UNIDAD
ARMADA UNA VEZ INSTALADO EL ESTANTE
DE VIDRIO Y/O CUANDO HAYA ALGUN
EQUIPO EN EL MUEBLE YA QUE ESTO
PODRÍA AFLOJAR EL ESTANTE Y OTROS
ARTÍCULOS Y HACER QUE SE CAIGAN.
! EL MUEBLE DEBE ESTAR UBICADO EN UNA
SUPERFICIE PLANA, SÓLIDA Y NIVELADA
CUANDO SE LO ESTE UTILIZANDO.
! NO INCLINE EL TELEVISOR CUANDO ESTE
EN EL SOPORTE PARA TV.
! NO SE SUBA NI SE PARE SOBRE EL
SÓPORTE.
! NO GOLPEE EL ESTANTE DE VIDRIO NI SE
APOYE CON SU PESO SOBRE EL MISMO
Schoenfeld International Inc. y ETEC no se hara
responsable en caso de que no se instale la base
segun las instrucciones, ni de la instalación, uso o
manejo incorrectos de esta base.

4 E6032S
LIMITED SIX-YEAR FURNITURE WARRANTY
We warrant this product to you, the original purchaser at the time of purchase printed on a dated store receipt from
an authorized ETEC retailer and for a period of six-years thereafter that our furniture product and all it’s parts and
components are free of defects in material and workmanship under normal use. This warranty is subject to the
provisions below. ETEC’s sole obligation and the purchaser’s exclusive remedy pursuant to these warranties are
limited to replacement at ETEC’s sole discretion. There are no other warranties except as expressively set forth
below either expressed or implied, including any warranty of merchantability for any particular purpose.
Should you be missing any of the assembly parts or components (screws, pieces, etc.), please contact the
Technical Support Center to secure a replacement for those parts. It is not necessary to bring the entire unit back
to the store. When calling, please use the parts list found in the Instruction Manual to help us accurately identify
the missing parts so we can promptly provide replacements.
Our Customer Support Center is available Monday - Saturday (10:00AM to 7:00PM EST) for technical assistance
or troubleshooting. To contact us, please call 1-855-994-3832 or visit www.sibrandssupport.com.
This warranty is expressly limited to the replacement of furniture parts and components described in the parts list
located in the Instruction Manual included with the product.
This warranty applies under conditions of normal use.
This warranty does not cover: any product, which has been subject to damage due to improper assembly or
disassembly, products which were not assembled, installed, used, or maintained in accordance with the product
assembly instructions & warnings, acts of nature, misuse, neglect, accidents, abuse, exposure to elements,
outdoor use, extreme temperature ranges, damage during transit, commercial use, modification of, or to any part
of the product or attachments to the product not approved by ETEC. Also not covered are costs for
assembly/dis-assembly labor, costs incurred in shipping the unit or parts for warranty repair/exchange or any
products purchased from unauthorized ETEC sellers. Under no circumstances shall ETEC, be liable for any loss
(direct, indirect, incidental, foreseen, unforeseen, special or consequential) or for any damage arising out of, or in
connection with, the use of this product. Nor shall ETEC have any responsibility for incidental or consequential
damages resulting from the breach of this warranty including but not limited to inconvenience, purchase or rental
of replacement products, loss of profits or commercial loss.
We reserve the right to request damaged parts or units be shipped to our offices for inspection or confirmation of
any warranty claims.
This warranty does not cover product sold ‘As Is’.
This warranty is valid only to the original purchaser of the Product in the United States and Canada and grants
specific legal rights.

PARTS
E6032S 5
Jx2
A B Cx2
x8x8
Kx1
D
M6x35mm
G
M6x15mm
x7
x20 E
M6x35mm
H
F
M6x54mm
25
0
15
54
35
x4
x9
x6
4x1
5x 2
6x 2
7x1
2x1
3x1
sretemillim
Ix4
1x1
45

E6032S 6
PARTS
M6x25mm M6x40mm
M4x20mm M4x30mm M5x30mm
M5x20mm
S12x4
S3x4 S4x4
S11x4
S2x4
S10x12
S9x4
S6x4
S1x4
S5x4
(14x6.2mm)
(22x8.2mm)
(14x14mm) (25x13mm)
S7x4 S8x4
M8x25mm M8x45mm
0
20
30
sretemillim
0
20
30
40
45
sretemillim
M4/M5 washers
M6/M8 washers
M4/M5 spacers M6/M8 spacers
10 x1
9x1
8x1
x1
x1
x1
11
13
14
x1
12
x1
15

STEP 1
+ +
Cx2
Ax8
A
2
3
4
1
A
C
C
7E6032S

++
Gx5
Bx8
B
G
STEP 2
E6032S 8
B
G

STEP 3
E6032S9
++
D
D
5
6
6
5
D
KDx8
M6x15mm

STEP 4
E6032S 10
+
++
Dx4
Jx2
+
E
M6x35mm
x4
D
E
J
J
7
E
D
K
M6x15mm

STEP 5
E6032S11
++
Gx2 Hx9
G
H
H
G
H

+++
D
I
x8
D
M6x15mm
Ix4 K
STEP 6
E6032S12
D
12
13
11
IF USING THIS STAND AS
A CONSOLE, SKIP TO
PAGE 16 AND INSTALL THE
3 GLASS SHELVES TO
COMPLETE THE
CONSOLE
STAND

F
++
x4
F
M6x54mm
STEP 7
E6032S 13
K
F
7

14 E6032S
STEP 8
S9-S10
S1-S8
S11-S12
S1, S2, S3,
S4, S5, S6, S7,
S8, S9, S10
?
TV
MANUAL
?
TV MANUFACTURER
CURVED REAR
FLAT REAR
S1-S8
M6x25mm M6x40mm
M4x20mm M4x30mm M5x30mm
M5x20mm
S3x4 S4x4
S2x4
S6x4
S1x4
S5x4 S7x4 S8x4
M8x25mm M8x45mm
S12x4
S11x4
S10x12
S9x4
(14x6.2mm)
(22x8.2mm)
(14x14mm)
(25x13mm)
M4/M5 washers
M6/M8 washers
M4/M5 spacers
M6/M8 spacers
Use ONLY for
Curved TV Rear
14
14
14

+
F
x2
F
M6x54mm
F
STEP 9
E6032S 15
14
TV
15

E6032S16
STEP 10
9
8
10

E6032S 17
IF ATTACHING THE WALL MOUNT DIRECTLY TO YOUR WALL, FOLLOW THE DIRECTIONS
ON PAGES 17, 18, & 19.
Attach the wall mount to the wall
After determing the ideal height on the wall for your television, follow the mounting instructions for
your type of wall construction: wood stud or concrete walls.
Wood Stud Wall
Fig. 3a
2-1/2” (65mm)
Fig. 3b
Fig. 3c
65
four
.5
four A C

E6032S18
Concrete Wall
four
four A C
B
2.5” 65
are level and parallel.
four
Make sure the horizontal holes are no closer than 16”.
2.5” (65mm)
Fig. 3c
Fig. 3d
Fig. 3e
Step 4: Hang the television display

E6032S 19
3. As the TV swings down and the lower part of the brackets come in contact with the wall mount
plate, secure each bracket to the Mount plate by pulling down on the attached ribbon (one bracket
at a time) to open the spring-loaded lock (Fig. 4c). Release each ribbon to close and secure the
lock mechanism. Test each lock by pulling gently upward from the bottom of the TV. If the lock is
secure the TV will not pull upward.
Fig. 4a Fig. 4b
Fig. 4c
To remove the TV from the Wall plate pull down on each ribbon to release the security lock and
gently pull the bottom of the TV away from the wall, then lift the TV off the top of the Wall plate.

E6032S20
Schoenfeld International Inc and ETEC
5001 American Boulevard West
Suite 275
Bloomington, Minnesota 55437
©Schoenfeld International Inc., 2018
E6032S Ver. 1.0 January 2018