ETEKCITY EAP1-HP User manual

Electric
High-Pressure
Air Pump
Questions or Concerns? [phone] • [e-mail]
Model No.: EAP1-HP

2
Thank You.
Thank you for purchasing the EAP1-HP High Pressure Electric Air Pump by Etekcity.
We are dedicated to providing our customers with quality products for building a
better living. Should you have any questions or concerns about using your new
product, feel free to reach out to our helpful customer support team at (855) 686-
3835 or by email at [e-mail]. We hope you enjoy your new product!

2
3
Package Contents
1 x Etekcity Air pump
1 x Adapter set
1 x User manual
Specifications
Voltage: AC 110-120V / 60Hz
Rated Power: 250W
Table of Contents
Safety Information 4
Function Diagram 6
Operation 7
Warranty 9
Customer Support 11

4
SAFETY
INFORMATION
IMPORTANT: Please read and comply with
all of the instructions and warnings provided
in this manual before using the product.
Failure to comply with the instructions and
warnings provided herein may result in
inaccurate results and/or damage to the
product itself.
To reduce the risk of burns, fire,
electric shock, or injury:
• ONLY use this air pump indoors.
• The rated voltage for this air pump is AC
110-120V.
• DO NOT leave the air pump on for more
than 10 minutes at a time; doing so may
cause the pump to overheat.
• DO NOT attempt to alter the air pump in
any way as this will void your warranty.
• DO NOT operate or place the pump on
or near hot surfaces such as ovens,
heaters, or active fires.
• DO NOT operate the air pump in wet
environments or immerse the pump in
any liquid.
• DO NOT cover any of the ventilation
openings with items such as newspapers,
table-cloths, curtains, etc.
• DO NOT place hands, fingers, or foreign
objects into the inflation or deflation
ports at any time.
• DO NOT look directly into the inflation
port with your eyes while the pump is
operating.
• Keep this air pump out of reach from
children.
• Close supervision is necessary when this
product is used by or near children, or

4
5
those with disabilities.
• DO NOT use the air pump with solid state
speed controls.
• Always unplug the air pump when putting
on or taking off parts.
• Turn off the air pump when it is not being
used.
• DO NOT attempt to repair or replace the
power cord.
• DO NOT route the cord underneath
carpets, rugs, furniture or appliances.
Arrange the cord away from high-traffic
areas and where it will not be tripped
over.
CAUTION: To reduce the risk
of electric shock damage to the
product:
• DO NOT operate the air pump for more
than 10 minutes at a time.
• ONLY store this product indoors.
• To disconnect the air pump, set the
power switch to the ‘OFF’ position, then
unplug the power cord.
• This air pump and its adapters are not
designed to work with needle valves (i.e.
basketballs or footballs) nor stem valves
(i.e. presta or schrader valves) found on
bicycles. DO NOT attempt to use the air
pump with these air valves.
Note for the Plug:
This appliance has a polarized plug (one
blade is wider than the other). To reduce the
risk of electric shock, this plug is intended
to fit in a polarized outlet only one way.
If the plug does not fully fit inside the
outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not
attempt to alter this safety feature.
SAVE THESE INSTRUCTIONS
Household Use Only

6
1. Pump
2. Inflation port
3. Deflation port
4. Power switch
5. Power cord
6. Adapters
3
2
1
6
5
4
FUNCTION
DIAGRAM
OPERATION

6
7
Properly Attaching Adapters for
Inflation
1. Select the attachment that best fits the
object you are trying to inflate.
2. Align the slots on valve with the knobs
on the inflation port.
3. Push the valve in, then twist to secure.
NOTE:
• The inflation and deflation ports will
fit directly onto larger items such as
inflatable rafts or air mattresses. Use
the appropriate-sized nozzle on smaller
inflation valves.
• DO NOT block the inflation or deflation
ports while the air pump is turned on.
OPERATION

8
Inflation
1. Attach the inflation port to the item
being inflated. If necessary, connect one
of the adapters to the inflation port.
2. Plug the power cord into a powered
electrical outlet.
3. slide the switch to the “ON” position to
turn on the air pump. Slide the switch to
the “OFF” position to turn off the pump.
Deflation
1. Attach the deflation port to the item
being deflated. If necessary, connect
one of the adapters to the deflation
port.
2. Plug the power cord into a powered
electrical outlet.
3. Slide the power switch the “ON”
position to turn on the air pump. Slide
the switch to the “OFF” position to turn
off the pump.
Maintenance
• When finished using the air pump, turn
it off, then unplug it from the electrical
outlet.
• Allow the air pump to cool for at least
30 minutes before storing.
• If necessary, use a damp cloth soaked
in mild detergent to remove any
tough stains on the air pump. Dry
immediately with a clean cloth. DO NOT
immerse the air pump in water or other
liquids.
• Store the air pump in a cool, dry
place. Make sure it is not placed in an
area with direct sunlight or chemical
substances.
• This air pump does not contain any
user serviceable parts.

8
9
TERMS & POLICY
Etekcity warrants all products to be of the highest
quality in material, craftsmanship and service for
a minimum of 1 year, effective from the date of
purchase. Warranty lengths may vary between
product categories. For specific warranty terms,
please refer to your product’s listing page or
operation manual.
Under the limited warranty, Etekcity will replace
or refund any product found to be defective due
to manufacturer flaws based on eligibility. This
warranty extends only to personal use and does
not extend to any product that has been used for
commercial use, rental use, or any other use in
which the product is not intended for. There are no
warranties other than the warranties expressly set
forth with each product.
This warranty is non-transferrable. Etekcity is not
responsible in any way for any damages, losses or
inconveniences caused by equipment failure or by
user negligence, abuse, or use noncompliant with
the user manual or any additional safety, use, or
warnings included in the product packaging and
manual.
Etekcity and its subsidiaries assume no liability
for damage caused by the use of the product
other than for its intended use or as instructed
above and in the user manual. Some states do not
allow this exclusion or limitation of incidental or
consequential losses so the foregoing disclaimer
may not apply to you. This warranty gives you
specific legal rights and you may also have other
rights which may vary from state to state.
ALL EXPRESS AND IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD
OF THE LIMITED WARRANTY.
Should your product prove defective within the
specified warranty period, please return the
defective unit in its original packaging with (1)
an original copy of the invoice, (2) your order
confirmation number, (3) and your warranty ID
number.
WARRANTY

10
To receive a valid warranty ID number, sign into
your Etekcity customer account at www.etekcity.
com (If you ordered your product through Amazon,
Ebay or Walmart, create an account at www.
etekcity.com in order to retrieve your warranty ID).
At the top of the warranty page, type in your order
number located in your order invoice to retrieve
your warranty ID number. Your warranty ID number
will then be sent to your email for your records. If
deemed defective, your product will be replaced or
refunded at no charge to you.
EXCEPTIONS AND EXCLUSIONS
• Damage due to abuse, accident, alteration,
misuse, tampering or vandalism.
• Improper or inadequate maintenance.
• Damage in return transit.
• Unsupervised use by children under 18 years of
age.
Date of Purchase
Place of Purchase
Order Number
Warranty ID
SUPPORT

10
11
Should you encounter any issues or have any
questions regarding your new product, feel free to
contact our helpful Customer Support Team. Your
satisfaction is ours!
Customer Support
Etekcity Corporation
1202 N. Miller St. Suite A
Anaheim, CA 92806
Toll-Free: [phone]
Fax: [phone]
Local: [phone]
Email: [e-mail]
Support Hours
Monday - Friday:
9:00 am - 5:00 pm PST
*Please have your order
confirmation number ready before
contacting customer support.
CUSTOMER
SUPPORT

Scan here to join
the community!
www.etekcity.com