ETEKCITY EAP3-RC User manual

Mode No.:EAP3-RC

Input：DC 5V
Capacity：2000mAh
Pressure：0.6PSI
1 x Air Pump
1 x User Manual
1x Big Nozzle
1x Three Nozzles
Safety Information
Function Diagram
Charging the Battery
Operation
Maintenance
Warranty Information
Customer Support
3
5
6
7
8
9
11

DO NOT leave the air pump on for more
than 15 minutes at a time;doing so may
cause the pump to overheat.
READ AND Save
These Instructions

1. Pump
2. Inflation port
3. Deflation port
4. Three Nozzles
5. Power switch
6. Big Nozzle
7. Type-C USB Cable
7

•
•
•
•
•
•
Please use the Type-C USB cable
supplied with this product to charge.
Please make sure to use a 5V USB
interface for charging.
General USB cable can charge in your
vehicle, can also use adaptor with USB
interface, such as mobile phone adaptor,
power bank, computer and so on.
When charging the battery,indicator light
shows red color.When charging the
battery full,indicator light shows green
color.
Charging time is about 4 hours.
Before charging , make sure that the
battery has been fully discharged.
The battery should be recharged
immediately after it is discharged.
Please do not lay the pump aside
without power for a long time.
The battery must be removed from the
appliance before it is scrapped：
- the appliance must be disconnected
from the supply mains when removing
the battery;
- the battery is to be disposed of safely.

•
•
•
•
•
•
Use the pump directly in which the
battery has been fully charged.
Join nozzle to inflation port, then
hold pump against valve of inflatable
item and switch on for inflation/switch
off for stop.(the symbol “-”on the
switch means “ON”, “o” means
“OFF”)
The valve of inflatable item should not
be obstructed. Otherwise, it could
overheat and damage the pump.
On large items like inflatable
beds, king-size air mattress, the
pump should fit directly to the
valve of inflatble item for fast
inflation. Use the appropriate
nozzle for small valve, such as
single-size air mattress, etc.
Open the valve of inflatable item.
Join adapter to deflation port,
then insert it in the
valve and switch on for defla-
tion/switch off for stop.
(the symbol “-”on the switch
means “ON”, “O” means “OFF”)

•
•
•
•
•
•
•
The vavle of inflatable item should
not be obstructed.
Otherwise, it could overheat and
damage the pump.
For small valve of inflatable item, it
may be pinched with your fingers to
open the flapper of valve and allow
the air to escape.
For quickly inflating the item with
screw valve, unscrew the safe bolt,
then inflate directly with the pump.
Unplug the power cord from the
electric outlet after use, or before
moving, servicing or making adjust-
ments to this product.
When not in use, please fully cool
down and put it in the box.
Please use it indoors, and avoid direct
sunlight or rain.
Store it in a dry, well ventilated place.

Terms & Policy
Etekcity warrants this product to the original purchaser to
be free from defects in material and workmanship, under
normal use and conditions, for a period of 1 year from the
date of original purchase.
Etekcity agrees, at our option during the warranty period,
to repair any defect in material or workmanship or furnish
an equal product in exchange without charge, subject to
date of purchase.
Product Name Elctric Air Pump
Model EAP3-RC
For your own reference, we strongly recommend that you
record your order ID and date of purchase.
Order ID
Date of Purchase
There is no other express warranty. This warranty does
not apply:
•
condition;
• If the product has not been used in accordance with
directions and instructions in the user manual;
• To damages or defects caused by accident, abuse,
misuse or improper or inadequate maintenance;
• To damages or defects caused by service or repair of
the product performed by an unauthorized service
provider or by anyone other than Etekcity;
• To damages or defects occurring during commercial
use, rental use, or any use for which the product is not
intended;
• To damages or defects exceeding the cost of the
product.
Etekcity will not be liable for indirect, incidental, or
consequential damages in connection with the use of the
product covered by this warranty.
WARRANTY INFORMATION

Warranty Information (cont.)
This warranty extends only to the original consumer
purchaser of the product and is not transferable to any
subsequent owner of the product regardless of whether
warranty.
This warranty does not extend to products purchased from
unauthorized sellers. Etekcity’s warranty extends only to
products purchased from authorized sellers that are subject
to Etekcity’s quality controls and have agreed to follow its
quality controls.
All implied warranties are limited to the period of this limited
warranty.
also have other rights which vary from state to state. Some
states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or
exclusion may not apply to you.
If you discover that your product is defective within the
via [e-mail]. DO NOT dispose of your product
before contacting us. Once our Customer Support Team has
approved your request, please return the product with a
copy of the invoice and order ID.
Extend Your Warranty by 1 Year
Register your product within 14 days of purchase at www.
etekcity.com/warranty to extend your 1-year warranty by an
additional year.
This warranty is made by:
Etekcity Corporation
1202 N. Miller St. Suite A
Anaheim, CA 93806

If you have any questions or concerns about
your new product, please contact our
helpful Customer Support Team.
Etekcity Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
Email: [e-mail]
Toll-Free: [phone]
Monday—Friday
9:00 am—5:00 pm PST/PDT
*Please have your order invoice and order ID
ready before contacting Customer Support.