ETEKCITY EAP1-RC User manual

Rechargeable
Electric
Air Pump
Questions or Concerns? [phone] • [e-mail]
Model No.: EAP1-RC

2
Thank You.
Thank you for purchasing the EAP1-RC
High Pressure Electric Air Pump by
Etekcity. We are dedicated to providing
our customers with quality products
for building a better living. Should you
have any questions or concerns about
using your new product, feel free to
reach out to our helpful customer
support team at
[phone] or by email at
[e-mail]. We hope you
enjoy your new product!

3
Package Contents
1 x Rechargeable Air Pump
1 x Adapter Set
1 x User Manual
Specifications
AC/DC adapter:
Input:100-240V~ 50/60Hz
Output:DC14.4V,200mA
Maximum operating power:60W
Air Pump:
Input:DC14.4V,200mA
Table of Contents
Safety Information 4
Function Diagram 7
Charging the Battery 8
Operation 9
Maintenance 10
Warranty 11
Customer Support 13

4
SAFETY
INFORMATION
IMPORTANT: Please read and comply
with all of the instructions and warnings
provided in this manual before using
the product. Failure to comply with the
instructions and warnings provided herein
may result in inaccurate results and/or
damage to the product itself.
WARNING: To reduce the risk
of burns, fire, electric shock, or
injury:
•• The rated voltage for this air pump is
DC 14.4V.
• Always disconnect the air pump when
it has finished charging. Overcharging
may shorten the lifetime of the battery
as well as the overall lifetime of the air
pump.
• DO NOT leave the air pump on for more
than 10 minutes at a time; doing so may
cause the pump to overheat.
• DO NOT attempt to alter the air
pump in any way as this will void your
warranty.
• DO NOT operate or place the pump
on or near hot surfaces such as ovens,
heaters, or active fireplaces.
• DO NOT operate the air pump in wet
environments or immerse the pump in
any liquid.
• DO NOT cover any of the ventilation
openings with items such as
newspapers, table-cloths, curtains, etc.
• DO NOT place hands, fingers, or foreign
objects into the inflation or deflation
ports at any time.

4
5
• DO NOT look directly into the inflation
port or point the inflation port at
another person’s eyes while the pump
is operating.
• Keep this air pump out of reach from
children.
• Close supervision is necessary when
this product is used by or near children,
or those with disabilities.
• DO NOT use the air pump with solid
state speed controls.
• Always unplug the air pump when
putting on or taking off parts.
• Turn off the air pump when it is not
being used.
• DO NOT attempt to repair or replace
the power cord.
• DO NOT route the cord underneath
carpets, rugs, furniture or appliances.
Arrange the cord away from high-traffic
areas and where it will not be tripped
over.
CAUTION: To reduce the risk
of electric shock damage to the
product:
• DO NOT operate the air pump for more
than 10 minutes at a time.
• ONLY store this product indoors away
from direct sunlight or chemicals.
• To disconnect the air pump, set the
power switch to the ‘OFF’ position, then
unplug the power cord.
• This air pump is a high-volume pump
intended to inflate items requiring low
pressure such as air beds, inflatable
rafts, and swimming pools.
• This air pump and its adapters are not
designed to work with needle valves (i.e.
basketballs or footballs) as well as stem
valves (i.e. presta or schrader valves)
found on bicycles. DO NOT attempt to
use the air pump with these air valves.
• Properly dispose this air pump

6
in accordance with your local
environmental disposal laws.
SAVE THESE INSTRUCTIONS

6
7
1. Pump
2. Inflation port
3. Deflation port
4. Adapters
5. Power switch
6. AC charger
7. DC charger
FUNCTION
DIAGRAM
2
4
76
5
3
1

8
CHARGING THE
BATTERY
Charging with the AC Adapter
1. Connect the AC adapter to the air
pump.
2. Plug the AC adapter into a powered
electrical outlet.
3. Set the power switch to ‘O’ to start the
recharge. The LED indicator on the AC
adapter will shine red; charging time is
5 hours.
4. Once the battery is fully charged, the
Charging with the DC Adapter
1. Turn on your car engine.
2. Connect the DC adapter to the air
pump, then plug in the DC adapter to
the cigarette port in your car.
3. Press ‘O’ to recharge the battery. The
battery will be fully charged in 3 hours.
4. Once the battery is fully charged,
disconnect the DC adapter from the
air pump.
NOTE:
• It is recommended to charge the
battery once every 6 months.
• The air pump cannot be used while the
battery is charging.
• The air pump must be charged before
the first use.
LED indicator will shine green. Unplug
the adapter from the outlet and
disconnect the air pump.

9
OPERATION
Inflation
1. Attach the inflation port to the item
being inflated. If necessary, connect
one of the adapters to the inflation
port.
2. Press ‘I’ on the power switch to turn
on the air pump. Press ‘O’ to turn off
the pump.
Deflation
1. Attach the deflation port to the item
being deflated. If necessary, connect
one of the adapters to the deflation
port.
2. Press ‘I’ on the power switch to turn
on the air pump. Press ‘O’ to turn off
the pump.
NOTE: The inflation and deflation ports
will fit directly onto larger items such
as inflatable rafts or air mattresses. Use
the appropriate-sized nozzle on smaller
inflation valves. Please take the charger
stopper out from the pump before charging
and using.

10
MAINTENANCE
• Make sure the battery is fully charged
before storing the air pump.
• Charge the battery once every six months
during storage.
• When finished using the air pump, set the
power switch to ‘O’ to turn it off.
• Allow the air pump to cool for at least 30
minutes before storing.
• If necessary, use a damp cloth soaked in mild
detergent to remove any tough stains on the
air pump. Dry immediately with a clean cloth.
DO NOT immerse the air pump in water or
other liquids.
• Store the air pump in a cool, dry place. Make
sure it is not placed in an area with direct
sunlight or chemical substances.
• This air pump does not contain any user
serviceable parts.