EtiamPro EDS201B User manual

Two-Wire Video Intercom User Manual
i
Legal Information
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version of this Manual at the company website Please use this
Manual with the guidance and assistance of professionals trained in supporting the Product.
Trademarks Acknowledgement
Trademarks and logos mentioned are the properties of their respective owners.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. OUR COMPANY MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR
A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL OUR COMPANY BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE),
PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF
OUR COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.

Two-Wire Video Intercom User Manual
ii
Data Protection
During the use of device, personal data will be collected, stored and processed. To protect data,
the development of our devices incorporates privacy by design principles. For example, for device
with facial recognition features, biometrics data is stored in your device with encryption method;
for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a
fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance with
the applicable data protection laws and regulations, including without limitation, conducting
security controls to safeguard personal data, such as, implementing reasonable administrative and
physical security controls, conduct periodic reviews and assessments of the effectiveness of your
security controls.

Two-Wire Video Intercom User Manual
iii
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Danger
Indicates a hazardous situation which, if not avoided, will or could
result in death or serious injury.
Caution
Indicates a potentially hazardous situation which, if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Note
Provides additional information to emphasize or supplement
important points of the main text.

Two-Wire Video Intercom User Manual
iv
Safety Instruction
●Warning The working temperature of the device is from -10 ºC to 55 ºC.
●All the electronic operation should be strictly compliance with the electrical safety regulations,
fire prevention regulations and other related regulations in your local region.
●Please use the power adapter, which is provided by normal company. The power consumption
cannot be less than the required value.
●Do not connect several devices to one power adapter as adapter overload may cause over-heat
or fire hazard.
●Please make sure that the power has been disconnected before you wire, install or dismantle
the device.
●When the product is installed on wall or ceiling, the device shall be firmly fixed.
●If smoke, odors or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.
●If the product does not work properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the device yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.)
●Caution Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnetism radiation. Avoid the equipment installation on vibrations surface or places
subject to shock (ignorance can cause equipment damage).
●Do not place the device in extremely hot (refer to the specification of the device for the detailed
operating temperature), cold, dusty or damp locations, and do not expose it to high
electromagnetic radiation.
●The device cover for indoor use shall be kept from rain and moisture.
●Exposing the equipment to direct sun light, low ventilation or heat source such as heater or
radiator is forbidden (ignorance can cause fire danger).
●Do not aim the device at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfunction however), and affecting the endurance of sensor at the
same time.
●Please use the provided glove when open up the device cover, avoid direct contact with the
device cover, because the acidic sweat of the fingers may erode the surface coating of the
device cover.
●Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do
not use alkaline detergents.
●Please keep all wrappers after unpack them for future use. In case of any failure occurred, you
need to return the device to the factory with the original wrapper. Transportation without the
original wrapper may result in damage on the device and lead to additional costs.
●Improper use or replacement of the battery may result in hazard of explosion. Replace with the
same or equivalent type only. Dispose of used batteries according to the instructions provided
by the battery manufacturer.
●Input voltage should meet both the SELV and the Limited Power Source according to 60950-1

Two-Wire Video Intercom User Manual
v
standard.
●The power supply must conform to LPS.

Two-Wire Video Intercom User Manual
vi
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with
"CE" and comply therefore with the applicable harmonized European standards
listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points. For
more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with this
symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your supplier or to a

Two-Wire Video Intercom User Manual
vii
designated collection point. For more information see:www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.

Two-Wire Video Intercom User Manual
viii
Contents
Chapter 1 Appearance................................................................................................................1
Chapter 2 Terminal Description ..................................................................................................2
Chapter 3 Installation.................................................................................................................3
3.1 Accessory Introduction .........................................................................................................3
3.2 Surface Mounting with Gang Box.........................................................................................3
3.3 Flush Mounting with Gang Box.............................................................................................4
Chapter 4 Typical Application .....................................................................................................6
Chapter 5 Video Intercom Operation..........................................................................................7
A. Dimension .............................................................................................................................8

Two-Wire Video Intercom User Manual
1
EDS201B
Chapter 1 Appearance
Figure 1-1 Appearance
Table 1-1 Description
No.
Description
1
Microphone
2
Calling Indicator
3
Speaking Indicator
4
Open Door Indicator
5
Built-in Camera
6
Supplement Light
7
Loudspeaker
8
TAMPER
9
Call Button

Two-Wire Video Intercom User Manual
2
EDS201B
Chapter 2 Terminal Description
Figure 2-1 Terminal Description
Table 2-1 Terminal Description
No.
Interface
Description
A1
NC1
Normally Close
A2
NO1
Normally Open
A3
COM
Common Interface
A4
NC2
Normally Close
A5
NO2
Normally Open
A6
GND
Grounding
A7
AIN1
Alarm Input 1
A8
AIN2
Alarm Input 2
A9
12V OUT
Power Supply Output
A10
GND
Grounding
A11
2-WIRE
Two-Wire Interface
A12
2-WIRE
Two-Wire Interface

Two-Wire Video Intercom User Manual
3
EDS201B
Chapter 3 Installation
Note
●Make sure the device in the package is in good condition and all the assembly parts are
included.
●Make sure your power supply matches your door station.
●Make sure all the related equipment is power-off during the installation.
●Check the product specification for the installation environment.
3.1 Accessory Introduction
The dimension of gang box/junction box is shown below.
Figure 3-1 Dimension of Gang Box
The dimension of the gang box is 103 mm × 162 mm × 40 mm.
3.2 Surface Mounting with Gang Box
Steps
1. Take the gang box and screws from the packing box.
2. Fix the gang box onto the wall with 4 screws.
3. Install the door station into the gang box, and fix it with 4 screws.

Two-Wire Video Intercom User Manual
4
EDS201B
Figure 3-2 Surface Mounting with Gang Box
3.3 Flush Mounting with Gang Box
Steps
1. Cave the installation hole, and pull the cable out.
Note
The suggested dimension of the installation hole is 103.5 mm × 162.5 mm × 40.5 mm.
2. Insert the gang box into the hole with 4 screws.
3. Install the door station into the gang box, and fix it with 4 screws.

Two-Wire Video Intercom User Manual
5
EDS201B
Figure 3-3 Flush Mounting with Gang Box

Two-Wire Video Intercom User Manual
6
EDS201B
Chapter 4 Typical Application
The typical application of the device is shown as below.
Figure 4-1 Typical Application
Wire the door station to the indoor station with 2-wire cables.
You can activate door station by indoor station.
Set the open duration and other parameters by indoor station.
Refers to the Indoor Station Configuration Guide for details.

Two-Wire Video Intercom User Manual
7
EDS201B
Chapter 5 Video Intercom Operation
You can call the resident by pressing the call button.
Press the call button of the door station. The resident can receive/decline the video call, unlock
the door, etc.
Note
●When the video intercom between you and the resident is realized, you can speak to the
resident, and the live view of door station will be displayed on the connected indoor station.
●When the door station is calling the resident, the door station will detect the brightness of video
automatically. When the brightness is lower than the expected threshold, the supplement light
will be enabled.
●When the supplement light is enabled, the backlight of key will be auto-enabled, otherwise, the
door station will detect the brightness of live view and enable the backlight of key when the
brightness of live view is lower than expected threshold.

Two-Wire Video Intercom User Manual
8
EDS201B
A. Dimension
The dimension of the villa door station is shown below.
Figure A-1 Dimension