Eufficio Innera Classic User manual

Insert the Innera Classic into the hole.Remove the locking Handles by pulling & Pushing
it down the rail before you are Inserting the Innera
Classic into the hole.
Tight the locking handles by install it on the rails
and push it up to the surface. Tight the handles strongly to the surface and
verify the Innera Classic is firmed and cannot be
rotated.
DEF
L
W
A B C
Components:
Critical safety information:
Installation:
Operation:
Cleaning:
Tools required:
Power DrillPower Saw Hole Cutter
2 x Locking
Handle
1 x Innera
Classic
Prior of use, please examine and verify that the product is not defected. Please do not install or operate if there is a defect of any kind.
If in any case you are facing misunderstanding of installation procedure, the installation should be carried out by certified electrician
Make sure you are installing the product on smooth straight surface. Do not install in any case that the surface is not straight or if there are levels differences.
Make sure water will not penetrate into the unit. In any case please make sure you are installing the unit, where proper leakage protection device is connected.
Drill hole into the surface according to the
INSTALLATION TABLE on page 2. Please verify
your purchased item's model No and drill the hole
according to the model's cutout dimensions.
Connect the GST Male connector to power
and the
Innera Classic is ready for use.
For use, turn the cover by pulling it up with a hand. REMARK: In case you need to connect the
Innera Classic to a standard socket, you should buy
a starter cable separately which not included in this
Kit and connect it according to illustration above.
The product can be cleaned by a soft and dry fabric. Please do not use moisture, abrasives materials,solvents or any detergents which can be conductive
The Innera Classic is ready for use.
1
2
G
1
Innera Classic
ISRAEL
Design & Electric
www.eufficio.com
Engineered in Germany
ATTENTION: Read the instructions prior to installation.
INSTALLATION INSTRUCTIONS

2
Innera Classic
ISRAEL
Design & Electric
www.eufficio.com
Engineered in Germany
INSTALLATION INSTRUCTIONS
INSTALLATION TABLE:
0769978897769
0769978897776
0769978897783
0769978897790
0769978897813
0769978897820
0769978897837
0769978897844
0726811931653
0769978897851
0769978897868
0769978897875
0726811931684
0769978897905
0769978897912
0769978897929
0726811931707
3 IL sockets
2 IL sockets & 2 Keystones
4 IL sockets
3 IL sockets & 2 Keystones
5 IL sockets
4 IL sockets & 2 Keystones
3 IL sockets & 4 Keystones
2 IL sockets & 6 Keystones
2 IL sockets,2.4A USBx2 Charge, 4 Keystones
6 IL sockets
5 IL sockets & 2 Keystones
4 IL sockets & 4 Keystones
3 IL sockets & 8 Keystones
8 IL sockets
7 IL sockets & 2 Keystones
6 IL sockets & 4 Keystones
4 IL sockets & 12 Keystones
IC-33
IC-32
IC-44
IC-43
IC-55
IC-54
IC-53
IC-52
IC-52C
IC-66
IC-65
IC-64
IC-73
IC-88
IC-87
IC-86
IC-1004
192
200.5
234
244
278
287
287
287
287
320
329.5
329.5
373
406
415.5
415.5
501.5
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
Catalog No DescriptionModel
Cutout Hole
Length mm (L) Width mm (W)
L
W
1mm Radius
L
W