Eureka CHAMPION User manual

CHAMPION™
INSTRUCTIONS MANUAL

Cautions for the rst use
Remember, safety should be your rst priority.
1. Please make sure that you disconnect all other electronic devices
connected to the power line you plan on using for your iron.
2. Make sure that you have removed any packaging or protective covers
from the soleplate.
3. When plugged in for the rst time, you may notice slight smoke due to
production grease. Do not worry as this will cease shortly.
4. Always avoid harsh contact between your iron and other metal objects.
1

Safety Instructions
1. Whenever you need to step away from the iron, make sure that you unplug
it and leave the iron in a vertical position with soleplate facing upright.
2. Avoid children near the plugged iron.
3. Avoid contact of hot soleplate with your hands or ammable objects
during use.
4. CAUTION! Make sure your iron is disconnected from the power supply
before pouring water in the water tank.
5. DO NOT immerse any part of the iron in any type of liquid.
6. DO NOT use the iron if the cord is damaged. Consult with the
manufacturer to get your iron xed or replaced.
(See last page for instructions)
7. To prevent deposition of minerals in the steam holes, it is
recommended to use distilled water for cleaner steam holes.
8. Never use chemically descaled water.
9. Avoid directing steam towards people or animals. Steam is hazardous
and can cause severe skin burns.
2

Parts & Features
1. Spray Nozzle
2. Water Filling Cover
3. Steam Control
4. Steam Surge™
5. Spray Mister
6. LED Indicator Light
7. Gripsoft™ Rubberized Handle
8. Retractable Control Button
9. Auto Shut-O LED Indicator Light
10. Heat Settings Dial
11. Water Tank
12. Self-Cleaning Button
13. Nano-Ceramic Shield™
Coated Soleplate
1
2
3
457
68
9
10
11
12
13
3

Dry Ironing
1. Set the movable Steam Control Lever to point ‘’0’’.
2. Adjust ironing temperature in accordance with the fabric’s requirement.
3. The light “ON” indicates that the iron’s temperature is increasing
steadily. Once desired temperature is reached, the light will turn
“OFF” automatically.
Filling with Water
Before lling the water tank, make sure that the iron is unplugged,
temperature dial is positioned at the “OFF” mark, and the iron is held at
approximately 45º tilt. Now, ll the water tank till the MAX mark.
Water Mister
You can use the spraying option by repeatedly pressing the spray button.
Make sure that your iron’s water tank is full.
4

Steam Adjustable
Control Lever
Steam Ironing
1. Fill the water tank in accordance with the instructions in the “Filling with
Water” section.
2. Plug the cord into the outlet.
3. The light “ON” indicates that the iron’s temperature is increasing
steadily. Once desired temperature is reached, the light will turn
“OFF” automatically.
4. According to your requirement, adjust the Steam Adjustable Control
lever by turning right for more steam and left for less steam.
5. To achieve best steam discharge make sure that the thermostat dial
is set at the MAX mark.
5

Steam Surge™
This function is specially designed to remove the toughest wrinkles and
creases present in heavy fabrics. By pressing the Steam Surge™ Trigger, a
sudden surge of steam is expelled out of the soleplate, which is extremely
useful in straightening even the most stubborn creases. For optimal
results, make sure Steam Surge™ is used at higher temperatures and a
regular 5 second delay between each steam burst is maintained. When
steam is completely depleted, give it some time for steam to build up.
6
Steam Surge™
Button

Vertical Steam
By holding the iron in a vertical position, you can apply burst of steam to
remove creases from curtains or any type of hanging fabrics.
Anti-Drip
An advanced system inside your iron prevents water leakage at even the
lowest heat setting.
Anti-Calc
Over time, lime scales may accumulate inside the iron or on the soleplate’s
surface. To prevent this, an anti-calc lter is permanently installed in this
appliance. It cannot be removed for cleaning purposes.
Auto Shut-O
1. If the iron is left unused for 15 minutes, the light will blink signaling that
the iron has automatically shut o.
2. If the iron is left on the fabric or accidentally tips over, the iron will
automatically shut o within 30 seconds. The blinking light on the iron
will indicate that the iron has shut o.
3. Move the iron back and forth on the linen to auto-restart. The light will
immediately stop blinking after achieving sucient temperature for you
to continue ironing.
7

8
15-Minute
Auto-O
30-Second
Auto-O
30-Second
Auto-O
Operating Your Retractable Power Cord
For your convenience, this steam iron has an automatic cord reel for
easy-handling and hassle-free storage at the push of a button.
1. When you have nished using your iron, make sure the steam selector
is on “0” and the thermostat dial is on “OFF”.
2. Unplug your iron.
3. When winding the cord, hold the plug with one hand, and press the
retractable control button with your other hand. (Failure to hold plug
may cause plug to swing around).

9
4. The cord reel is made for multi-layer winding. If the cord is not fully
rewound, press the retractable cord reel button and pull the cord
gently outward. This will help steer the cord evenly on the reel.
5. If the cord does not pull out easily, press the retractable cord reel
button to help release the cord.
6. Select the desired cord length before plugging the iron into an
electrical outlet.
7. Do not allow children to use the retractable cord feature as the cord
may cause injury.
Self-Cleaning
If the water in your area is hard (contains excessive dissolved mineral),
self -cleaning should be done every two weeks.
1. Your iron should be unplugged before self-cleaning.
2. Using the steam selector, set steam level to the mark ‘’0’’.
3. Fill the water tank to the MAX mark. Do not add any cleaning
solutions inside the water tank.
4. Before plugging in your iron, make sure that the thermostat dial is set
to MAX. Now allow the iron to heat up.
5. Indicator light will turn o once the iron reaches its optimal working
temperature.