Euromaid IHT60 User manual

MODEL
IHT60
600mm
Induction Cooktop
Manual
Installation and Operation

Contents
1. Technical Specifications...............02
2. Safety warnings .............................03
3. Preparation and installation .........06
4. Operating the Hob.........................09
5. Care and Maintenance..................17
Ceramic hob care ..........................................17
Deep fat frying ...............................................18
6. Cleaning .........................................19
7. Trouble shooting ...........................20
8. Future transportation....................21
Using the assembly clamp..............................07
Electrical Connection......................................08
Control Elements and Display ....................... 09
Turn on the hob..............................................10
Select hotplates..............................................10
Using the induction hotplates safely and
efficiently ........................................................11
Automatic Cooking and High Power
(Booster).........................................................13
Turning the hob off .........................................13
Key lock .........................................................14
Child lock .......................................................14
Timer function.................................................15
Noises ............................................................16
Sensor calibration and Error Messages...........16

EN
2
Technical Specifications
1. Ceramic hotplate
2. Assembly clamp
3. Lower case
4. Ceramic surface
External dimensions 60 cm
Width 580 mm
Depth 510 mm
Height 55 mm
Dimensions of installation setting
(*) Width 560 mm
Depth 490 mm
Supply voltage 230 V ~ / 400 V 2N ~ 50Hz
1
2
2
4
3
Technical specifications are subject
to alteration without prior notification
in order to improve the product
quality.
Figures included in the manual are
for schematic purpose only and may not
match exactly with your product.
Markings on the product or the values
stated in other documents supplied with the
product are values obtained under laboratory
conditions as per relevant standards. These
values may vary according to the usage of
the product and ambient conditions.
! This product has been
designed particularly for
household usage.
1- Ø 180 - 1800 W / 2500 W
2- Ø 145 - 1400 W / 1800 W
3- Ø 210 - 2200 W / 3200 W
4- Ø 280 - 2400 W / 3600 W
1 3
3
3
1 1
1
1
1
2 2
2
4
1
2
1
2
• The graphics and figures are for
illustration purposes only. The actual
view may be differ.

EN
3
Safety warnings
Look after yourself, family and
friends
Look after yourself, family and friends
• This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of
appliance by a person responsible for their
safety.
Children should be supervised to ensure that
they do not play with the appliance.
• To make your product ready for use, first
prepare the place it will be installed.
• Installation and electrical connections of the
appliance may only be made according to the
given instructions. Have the required processes
performed by a licensed installer/electrician. Then
call your Authorized Service.
• If the appliance is to be placed above a
cupboard, than a barrier is to be installed. For
this, please refer to installation instructions.
• During use surfaces get hot. Don’t touch hot
surfaces during use.
• Don’t store items above the appliance that
children may try to reach.
• Close supervision while cooking is essential at
all times.
• Check all controls on the appliance are switched
off after use.
• When deep-frying, the appliance should be
supervised as overheated fats and oils can catch
flame easily. Never attempt to extinguish burning
oil or fat with water (risk of explosion!). Smother a
fire with wet towels and keep doors and windows
closed!
• Ensure that the handles of pans and pots do not
catch fire or break, or they are not left out of the
boundaries of the hob in a level where children
can reach.
Look after your appliance and
home
• Clean your appliance regularly, ideally
after each use. Always turn off the mains
electricity supply and allow the appliance
to cool first.
• Spillage should be dealt with as soon as it
occurs, taking due care as the appliance surface
may be hot. Any spillage left on the surface
after cooking should be cleaned off before
the appliance is switched on again to prevent
baking on.
• Don’t use bleaching products, harsh abrasives
or chemical cleaners for cleaning.
• Do not use a steam cleaner with to clean this
appliance.
• Ensure that no flammable materials are
adjacent to the appliance as the sides become
hot during use.
• Don’t place flammable or plastic items on or
near the appliance, and never place wet cloths
etc. on the appliance to dry.
• Vapor pressure that arise as a result of the
humidity between the hob surface and the pan
can cause the pan slip or bounce. Therefore,
make sure that the bottom of the pan and the
hob surface are always dry.
Important for asthmatic sufferers
• It is normal that some smoke and odor may
arise during the first usage because of the
protective coatings. In this case, ventilate the
room thoroughly and avoid inhaling the fume
that arises.
Since the induction hob creates a
magnetic field, it can cause harmful
effects for people who use medical
devices such as pacemaker or insulin
pump.

EN
4
• Don’t heat up unopened food containers as
pressure can build up causing the container to
burst.
• The surfaces of the stainless steel model
appliances which are close to the burners may
change colour because of the excessive heat in
the course of time.
• Lower electrical hotplates of your hob
are equipped with advances “Induction”
technology. You must use your time and
money saving Induction hob with pans that
are suitable for Induction cooking (read
the section on pan choice); otherwise, your
appliance will not operate.
Important Safety Information
This appliance is in accordance with
the recognized state of the art and the
relevant safety provisions. However,
proper handling of the appliance is a must in
order to prevent damages and accidents. Along
with the following information, please take note
of further information contained in the text.
WARNING: Immediately switch off the
appliance from the mains to avoid the
possibility of an electric shock when a
crack occurs on the ceramic glass surface
due to any mechanical impact.
You should refer to your authorized service
in such a case.
• No alterations or repair attempts, in particular
using tools (screwdrivers, etc.) may be
undertaken to or on the appliance. Qualified
experts who have been specially trained for this
appliance may only perform repairs, in particular
to electrical supply parts. Improper repairs
may lead to serious accidents, damages and
breakdowns.
In the event of a breakdown of the appliance,
(before contacting our customer service
department), please review the information
contained under “Warranty terms”. Please call
our customer services when required.
Natural ventilation is important for the
correct functioning of the appliance
and your own safety.
Prolonged intensive use of the appliance may
call for additional ventilation such as opening
a window, or the use of permanent fixed
mechanical ventilation system such as an
extractor fan or cooker hood that ventilates to
the outside.
• Always refer servicing to a qualified
appliance service engineer.
How to use:
• The glass ceramic hob may only be used for
the preparation of food items in the domestic
household. In the event that the appliance is
misused for another purpose or improperly
handled, no liability can be assumed for possible
damages.
• Do not use the hob to heat the room.
• As soon as a functional disturbance is
detected or if, e.g. due to extreme mechanical
effects, cracks appear on the surface of the
glass ceramic plate, the device must be put out
of operation immediately: turn off the device and
disconnect it from the electrical mains network
(loosen fuses or turn off automatic switches).
• Connection cables of electrical devices should
not be exposed to hot cooking zones or the
cookware. Otherwise, the electrical insulation
may become damaged.

EN
5
How to avoid damages to your
glass ceramic hob
The glass ceramic surface is non-sensitive to
heat (up to 650°C) and temperature fluctuations
as well as being break-proof and scratch-
resistant to a certain degree.
Nonetheless, please observe the following
information in order to prevent damages:
• In no event should you pour cold water over
the hot burners.
• Do not climb onto the glass ceramic plate.
• A sudden stress could become critical, e.g.
during the impact of a saltshaker. Therefore, it
is best that you do not store such items above
the hob.
• Before each use, you should ensure that the
base of the cookware as well as the surfaces of
the cooking zones are clean and dry.
• Always lift but do not drag cookware in order
to prevent scratching of the ceramic glass
surface and wear and tear to the décor.
• Avoid peeling vegetables upon the hob
surface. Grains of sand falling from the
vegetables can scratch the glass ceramic plate.
• Do not use the hob as a storage surface; in
particular, do not lay any flammable materials,
cartons or plastic packages upon it. Objects
made of pewter, zinc or aluminum (also
aluminum foils or empty coffeepots) could melt
on hot cooking fields and cause damages.
• Take care that no sugar-containing foods
or juices come into contact with hot cooking
zones. The surface of the ceramic glass could
be stained as a result. Remove overflows
immediately, even while still in a hot state.
• Do not place hot pots or pans on the frame of
the burner.
• When cleaning, care should be taken that no
water penetrates the appliance, as penetrating
water could cause damages. Therefore, you
should only use moist cloths. Never squirt water
onto the appliance and refrain from using steam
cleaners.
Pertaining to Disposal:
• Please separate the packaging materials for
recycling and dispose of it at a public rubbish
collection location. Packaging materials are not
toys for children.
• Permanently connected devices (without plug)
must be disconnected from the mains network
before removal by a licensed electrician.
• Make the device non-functional before
disposal: Cut off mains cable (after unplugging)
or any existing loose connection cables on the
device.
• Make sure that the appliance is disposed of
properly.
Food hygiene
• Ensure meat and poultry is thoroughly
defrosted before cooking.
• Check food is thoroughly cooked and is
piping hot.

EN
6
Preparation and installation
Assembly of the Built-in Hob
• This built-in hob is designed to be
placed in a space on the counter.
Assembly may only be performed by a
trained professional.
• The electrical connections of the appliance
to the mains network should be made by a
licensed electrician. Thereby, the local safety
provisions as well as the technical connection
provisions of the local electrical supply company
must be observed.
• An all-pole separator with a contact opening
of at least 3 mm must be built into the house
installation (screw-retaining devices, earthed
conductor switch, main switch).
• The distance from the high side walls to the
side hollow corner must amount to at least 5
cm.
• If an oven is going to be fitted underneath the
hob, then the oven must have a cooling fan.
• Enough clearance should be provided
between the bottom side of the induction hob
and the built-in oven or furniture to be placed
underneath the product in order to allow for
adequate air to cool the induction hob. Hence,
direction of the hot air towards cooling unit shall
be prevented. You must avoid allowing for high
temperatures to be built up in the area under
the hob as a result of placing an oven without
ventilation function underneath the induction
hob.
Attention: When installing the hob onto
a cupboard, ensure that at least a 55-mm
distance is left between the (A) surface of the
cupboard and the lower surface of the hob. If
installing above an underbench oven this is not
required.
55 mm min.
A
19.29 in
1.97 in (min)
3 cm
49 cm
5.0 cm
(min)
5.0 cm
(min)
5.0 cm
(min)
56 cm
If the underside of the appliance is
touchable because of fitting it above a
drawer, then this section must be covered
by a wooden plate.

EN
7
Using the assembly clamp
1. Prepare the worktop as shown.
2. Remove the sealing gasket from the packaging.
3. The sealing gasket provided in the package must be affixed around the
glass frame on the lower surface as shown in the figure, during installation
of your hob.
4. Center the appliance in the counter.
5. Tighten the screws of the springs located on the base of the appliance
to secure the appliance in position.
 
A ventilation opening of min. 180
cm2should be provided at the rear
side of the furniture.
If there is an oven below; If there is a board below;
During installation of your induction hob, special care should be paid to place the product parallel
to the installation surface. Furthermore, leaking of any kind of liquid between the product and the
counter must be prevented by applying the sealing gasket under the hob as described above.
4 cm
min 45 cm
7 mm min
Installation to your hob must be performed with the supplied
assembly clamp as described in Figure 1. An assembly clamp
must be installed to the points indicated in the Figure 2, which
shows the bottom view of the hob.
Bottom view of
the hob
Figure 2
Worktop
Assembly clamp Figure 1
Hob

EN
8
Electrical Connection
2 PHASE
CONNECTION
SUPPLY
CABLE
SUPPLY
CABLE
400 V 2N ~230 V ~
SINGLE PHASE
CONNECTION
Have a licenced electrician connect the power
cable's
- brown wire to the live phase,
- black wire to the live phase (to the other live
phase if available),
- blue wire to neutral line,
- grey wire to neutral line,
- green/yellow wire to the grounding
line.
• Do not connect the appliance to the
electricity supply until all packing and
transit protectors have been removed.
Before your appliance is connected to the mains
electricity supply, check to ensure that the
voltage and frequency shown on the rating label
corresponds with your power supply.
• Installation and electrical connections of the
appliance may only be made according to the
given instructions. Have the required processes
performed by a licensed installer/electrician.
Then call your Authorized Service.
Operating power of your product is
230 V ~ / 400 V 2N ~ 50Hz. In single-phase
operation, your hob’s current drawing rate is
maximum 32 Amperes and maximum 2x16A
during 2-phase operations.
Have the compliance of the fuse and electrical
installation of your home checked by a licenced
electrician and have them approved as to their
suitability for your product.
• Have the grounding installation connected by
a licensed electrician.
Warning!
This appliance must be earthed.
• The appliance must be connected via the
supplied original cable or by a cable equivalent
to h05RRF 5G1,5mm2 cable.
• A switch capable to cut the power to all poles
on the product, having a 3mm-gap between its
contacts must be used with the product. This
switch should be located to an accessible place.
• The power cable should be routed away from
the appliance.
• If the power cable is damaged, it must be
replaced only by the authorized service.
The cable length should be 2 m. max for
isolation safety.
• Our firm shall assume no responsibility in
case of damages arising from usage without
observing the instructions given above.

EN
9
Operating the Hob
Control Elements and Displays
Features
Main button - ON/OFF Key
* Timer display (4 LED assigned for 4
different hotplate)
Note:
• This appliance is controlled via the touch
control unit. If your touch control unit has a
timer, each operation is confirmed with an audio
signal.
• Always keep the control panels clean and dry.
Moisture and dirt may cause
malfunctioning.
(*) If your hob is equipped with
timer.
Hotplate (cooking zone)
Selection controls
Keylock
Heat setting/Timer increase
Heat setting/Timer decrease
* Activate/deactivate timer
Decimal Point
• The graphics and figures are for
illustration purposes only. The actual view
or functions may differ.