Euromatic APCSM25 User manual

Model Number APCSM25
INSTRUCTION MANUAL
Air Purifier
AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761

2After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
03 General Safety Instructions
06 Product Overview
08 Getting Started
09 Instructions
11 FAQs & Troubleshooting Guide
12 Other Useful Information
Contents

3
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before first use, even if you are familiar with this
type of product. The safety precautions enclosed herein reduce the risk of fire,
electric shock and injury when correctly adhered to. Make sure you understand
all instructions and warnings. Keep the manual in a safe place for future
reference, along with the completed warranty certificate, your purchase receipt
and the original packaging. If you sell or transfer ownership of this product, pass
on these instructions to the new owner. Always follow basic safety precautions
and accident prevention measures when using an electrical appliance,
including the following:
Electrical safety and cord handling
• Electrical connection: The unit comes with a plug ready for connection to
your mains power outlet. Ensure your electrical outlet is properly installed and
earthed and complies with your local electrical safety requirements.
• Voltage: Before turning on the air purifier, ensure the electrical voltage and
circuit frequency correspond to those indicated on the appliance.
• WARNING! To reduce the risk of electrocution, never immerse the appliance
in water or other liquid; never spill liquids into it. Do not place or store it where
it can fall or be pulled into a tub or basin. If it accidentally has fallen into
water, do not reach into the water. Immediately unplug it, let it dry and have it
checked by an authorised service technician.
• Moisture: Do not use the appliance in a bathroom or laundry, or where it can
be splashed with water. Do not use it outdoors or operate it with wet hands.
• Power supply cord: Do not kink or damage the cord. Do not pull the cord
or place it near a heat source; keep it away from heated surfaces. Always
unwind the cord completely to avoid overheating. Run the cord in such a way
so that no one will trip over it. Do not cover the cord or run it under carpeting.
• Extension cord/adaptor: Do not modify the length of the power cord or use
an extension cord or power adaptor. Do not share a single outlet with other
appliances. Improper power supply can cause fire or electric shock.
• WARNING! To reduce the risk of fire or electric shock, do not use this
appliance with any solid-state speed control device.
• WARNING! Turn off the unit and unplug it when it is not in use, before
servicing, moving or cleaning it, before removing a filter and during a
thunderstorm. When disconnecting, grip by the plug, do not pull by the cord.
• Switching on/off: Do not use the mains plug to start and stop the unit;
always use the POWER button to start and stop the unit.
Important Safety Instructions

4After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
• WARNING: If the unit is knocked over during use, turn it off and unplug it
from the mains power supply immediately. Visually inspect the unit to ensure
there is no damage. If you suspect the unit has been damaged, do not use
it. Switch it off, unplug it and contact a technician or our after sales support
centre for assistance. Do not pick up or operate a damaged appliance, or after
it malfunctions or has been dropped or damaged in any manner.
• Damaged cord: If the supply cord is damaged, do not use the appliance.
A damaged power supply cord must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
• RCD: The installation of a residual current device (safety switch) is
recommended to provide additional safety protection when using electrical
appliances. It is advisable that a safety switch with a rated residual operating
current not exceeding 30mA be installed in the electrical circuit supplying the
appliance. See your electrician for professional advice.
Usage conditions and restrictions
• Intended use: This appliance is intended for purifying indoor air in domestic
environments. It is not suitable for commercial, industrial or trade use. Do not
use it for any other purpose, and only use it as described in this manual.
• Common sense: These instructions are not intended to cover every possible
condition and situation. As with any electrical appliance, common sense and
caution are therefore always recommended when installing, operating and
maintaining the unit.
• No outdoor use: Do not use the unit outdoors. It is for indoor use only.
• Usage restriction: This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the
hazards involved.
• Children: Supervise children to ensure they do not play with the appliance.
Close supervision is necessary when any appliance is used by or near
children. Cleaning and user maintenance shall not be made by children without
supervision.
• Unattended: Do not leave the appliance unattended when in use.
• Openings: Do not obstruct the air intake or outlet openings. Do not insert any
objects, or your fingers into the air inlet or air outlet openings.
• Attachments: The use of attachments not recommended or sold by the
manufacturer may cause fire, electric shock or injury.
Important Safety Instructions (Cont.)

5
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
• Handle with care: Do not shake the appliance vigorously or drop it from an
elevation. Doing so will damage the product or shorten its lifespan. Do not sit
or stand on the appliance, which may lead to potential injury. Do not press
hard on top of the unit or place heavy things on top of it.
• Location: Always place the appliance on a dry, stable, level and horizontal
surface. Never place it on an inclined or uneven surface. Do not use the
appliance in an environment where oil is used or smoke is generated, such as
in a kitchen.
• Clearances: Ensure there is a clearance of at least 30cm from walls and
furniture and at least 50cm from electrical appliances.
• Protect from heat: Do not use the appliance near appliances that get hot
during use, such as heaters, ovens or fireplaces. Avoid long-term exposure to
direct sunshine.
• No flammable gases: Never locate the air purifier in an area where flammable
and combustible gases are present. If combustible gas accumulates around
the unit, it may cause a fire.
• Moving the appliance: When moving the air purifier, always turn it off first and
disconnect the power supply, and then move it slowly. Keep the unit upward
during transport and storage.
• Misuse: We accept no responsibility for any eventual injury or damage caused
by improper installation, misuse or noncompliance with the instructions.
Cleaning and maintenance
• Disconnect: Make sure the appliance is disconnected from the power supply
when it will not be used for a long time and before cleaning or maintenance.
• Service: Except for the filter, the air purifier has no user-serviceable parts
contained inside. Do not attempt to disassemble, modify or conduct
repairs on this unit. It has been built in accordance with relevant safety and
performance standards. An electrical specialist must carry out all repairs. If the
appliance requires service, please contact our after sales support centre.
• Cleaning: Clean the outside of the unit once a month using a dry or slightly
damp cloth (not wet!), or use a soft brush attachment of a vacuum cleaner.
Never use water, wax, polish, or any other chemical solution to clean the
outside of the unit.
Never use water or any household cleaners or detergents to clean the
multi-layer filtration system; use a dry, soft brush to clean the filters and
replace them when necessary.
Important Safety Instructions (Cont.)

6After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Scope of delivery
Air purifier
NOTE: Due to continued product improvement, images and illustrations in this
manual may vary slightly from the product purchased. All images in this manual are for
reference purposes only. Parts are not necessarily pictured to scale.
1 Control panel
2 Housing
3 Air intake
4 Base with air quality light (illuminates green when the air quality is good,
yellow when it is average and red when it is poor)
5 Air outlet
Documentation (not shown)
Instruction manual, Warranty certificate
Product Overview
4
1
2
3
5

7
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Control panel
Product Overview (Cont.)
Touch buttons
1
2
3
4
5
POWER ON / STANDBY
Press SPEED to select the speed from:
AUTO --> SLEEP --> LOW --> HIGH
Press TIMER to select the off-timer from:
1 hr --> 2 hrs --> 4 hrs --> 8 hrs -- OFF
CHILD LOCK
FILTER RESET

8After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Before first use
• Unpacking: This product has been packaged to protect it against
transportation damage. Unpack the appliance and keep the original
packaging materials in a safe place. It will help prevent any damage if the
product needs to be transported in the future, and you can use it to store
the appliance when it is not in use. In the event that the packaging is to be
disposed of, please recycle it where possible.
• Unpack the filter: Make sure you remove both the plastic bag from the
air purifier and the protective plastic bag from the filter. (Please refer to
page 12 for instructions.)
• Safe packaging disposal: Plastic wrapping can be a suffocation hazard for
babies and young children, so ensure all packaging materials are kept out of
their reach and disposed of safely.
• Inspection: Unwind the cord fully and inspect it for damage. Do not use
the appliance if any part is damaged. In case of damage, contact our after
sales support centre for advice.
• Documentation: Make sure you have read and understood all instructions
and warnings in this manual. Refer the Product Overview to identify all parts
of the appliance and familiarise yourself with its operating principles. Pay
particular attention to the safety instructions on the previous pages.
Features
• Control panel with touch controls for easy operation
• Air quality light (green = good, yellow = average, red = poor)
• 8 hour timer
• Sleep mode
• Filter replacement reminder
Air purification system
The EUROMATIC Air Purifier is designed to help you keep your home clean and
free of indoor air pollutants and allergens. It sucks in the air through the air intake
grilles at the front and back of the appliance and releases the purified air through
the outlet on top. The appliance is equipped with an effective multi-layer 3-in-1
filtration system (HEPA-type filter with carbon coating and a prefilter).
• The E11 HEPA-type filter captures 95% of microfine airborne particles such as
dust, pollen, bacteria and smoke.
• The carbon coating attracts and neutralises harmful or undesirable fumes and
odours from cleaning, cooking or new furniture.
• The prefilter traps bigger breathable particles, such as pet hair and dander.
Getting Started

9
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Location
• Place the appliance on a dry, stable, level and horizontal surface. Never
place it on an inclined or uneven surface.
Connecting the air purifier and switching on/to standy
• Plug the appliance into a properly earthed mains socket and switch on
power to the outlet. The appliance emits a brief sound and all indicators
illuminate briefly. After three seconds, the air purifier will be in standby mode
and the POWER indicator will be illuminated with half-brightness.
• Press the POWER button once to turn on the unit. The POWER and
SPEED indicators illuminate, other indicators are lit with half-brightness.
The air quality sensor starts working.
• When the unit is running, press the POWER button to switch the machine
to standby mode.
Fan speed
• Press the SPEED button to select the fan speed options:
AUTO --> SLEEP --> LOW --> HIGH.
Auto mode
In AUTO mode, the air purifier automatically adjusts the purification level based
on the sensor’s detection data.
• Select AUTO mode using the SPEED button.
• When the air quality is poor, the air quality light illuminates red and the motor
runs at high speed.
• When the air quality is average, the air quality light illuminates yellow and the
motor runs at low speed.
• When the air quality is good, the air quality light illuminates green and the
motor runs at very low (sleep) speed.
Sleep mode
In SLEEP mode, the motor runs at very low speed and all indicator lights are off
including the air quality light. Only the SLEEP and POWER indicators are lit with
half-brightness.
• Select SLEEP mode using the SPEED button.
• Press any button to exit SLEEP mode.
Instructions

10 After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Instructions (Cont.)
Off-timer
Make sure the appliance is switched on before setting the timer.
• Press the TIMER button to select the off-timer period: 1 hour, 2 hours,
4 hours, 8 hours. The appliance will start timing and shut down automatically
after the set period.
Filter reset
The air purifier has a filter reset indicator built in that automatically counts the
usage time and reminds you when the filters need to be cleaned or replaced.
When you start the machine, the filter indicator begins counting the hours of
usage. It stops counting when the appliance is shut down or is in standby
mode and resumes counting when you switch it on again.
When the filter indicator has counted a total of 2000 hours, the FILTER RESET
indicator will start flashing to alert you to clean or replace the filters.
• Please refer to page 12 for instructions how to clean the filters, or to page 13
for how to purchase replacement filters.
• To clear the accumulated time after you have cleaned or replaced the filters,
press the FILTER RESET button. The appliance will emit a brief sound
and the FILTER RESET indicator will be off.
Child lock
The air purifier is equipped with a child lock, which locks all buttons to prevent
children from changing settings while the appliance is operating.
• To activate the child lock mode, make sure the appliance is in operation.
• Press the CHILD LOCK button to activate the child lock. All other buttons
are now locked.
• Press the CHILD LOCK button again to cancel the child lock mode and
restore access to other buttons.

11
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Problem Possible cause and solution
The appliance does
not switch on.
Power is not properly supplied — make sure the
appliance is properly connected to your power supply
and your electrical outlet is working.
The electrical outlet is faulty — check whether the unit
is working if connected to a different power outlet.
The appliance is not switched on — ensure you have
pressed the POWER button to switch on the appliance.
The appliance
makes a loud noise.
The air purifier is located on an inclined surface —
place the unit on a level surface.
The filter is clogged — check all filters and clean or
replace them as necessary.
The air inlet is blocked — check and ensure that the air
inlet and outlets are free of obstructions.
Poor air purifying
effect, especially
with regard to
odours.
The filters are installed incorrectly — refer to page 12
for correct filter installation instructions.
The filters may have reached the end of their lifespan
— replace the filters.
An unpleasant
odour is coming
from the machine.
The filters needs to be changed — replace the filters
according to the instructions.
There is a burnt
smell and/or smoke
coming from the
unit.
The unit is faulty — switch off and unplug the unit, then
contact our after sales support centre.
The filter parts are still in the original packaging — refer
to page 12 for correct filter installation instructions.
The filter indicator
does not turn off.
You may not have reset the counter — press the
FILTER RESET button to reset the counter.
The unit got wet
and now works
abnormally.
The unit is damaged — switch off and unplug the unit,
then contact our after sales support centre.
If you experience problems with your air purifier, or it appears not to be
operating correctly, check the information below for solutions to common
problems. If you still cannot solve your problem, please contact our after sales
support centre for advice. Do not attempt to repair the appliance yourself.
FAQs & Troubleshooting Guide

12 After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Electric shock hazard!
Before cleaning and servicing, ensure the unit is switched off and
disconnected from the power outlet to prevent possible injury.
Cleaning the exterior parts of the appliance
When required, clean the outside of the unit using a clean and soft, dry or
slightly damp cloth (not wet!). Use a dry cloth or a vacuum cleaner soft brush
attachment for cleaning the air outlet and intake grilles.
CAUTION! Never use water, wax, polish, or any other chemical cleaning agent
to clean the outside of the unit.
Filter maintenance
The multi-layer filtration system must be cleaned and/or replaced regularly, as
appropriate, in order to ensure efficient operation and maintain the unit in good
working order. When the FILTER RESET indicator flashes, it is time to clean or
replace the filters.
1. Tilt the unit and rotate the base in anticlockwise direction until it cannot be
rotated any further.
2. Take the base off the unit, then remove the carbon-coated HEPA-type filter.
3. Clean the filter using a soft, dry brush to remove dust and debris.
IMPORTANT! Never use water or any household cleaners to clean the
filtration system.
4. When the filter is worn or damaged, or when the air purification effect
remains poor after cleaning the filter, it is time to replace it. Spare filters
are available for purchase from our after sales support centre.
5. Replace the clean (or new) filter into the appliance, then attach the base
and turn in clockwise direction to close securely.
6. IMPORTANT! After cleaning or replacing the filters, remember to press the
FILTER RESET button to reset the counter.
Other Useful Information

13
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Storage
If the appliance is not going to be used for an extended period of time,
please store the unplugged appliance safely in the original packaging in a
dry location, out of reach of children. Do not place any heavy items on top of
appliance during storage as this may result in damage of appliance.
Service, repair and spare parts
If you look after your air purifier it should give you years of good service.
Should you experience problems with the appliance that you cannot solve
yourself using the advice given in this manual, please contact our after sales
support centre for advice. Do not attempt to open the appliance.
Our after sales support centre stocks spare filters for the air purifier.
To purchase a filter set, call the centre on 1300 886 649 or email us at
[email protected]g.
Other Useful Information (Cont.)
Technical specifications
Power input 220–240V~ 50Hz
Rated power 26W
CADR 110m3/h
Room size suitability up to 16m2
Dimensions (approx.) 210 x 210 x 310 mm
Weight (approx.) 2.14kg
The RCM Mark (Regulatory Compliance Mark) indicates that the product
complies with the relevant guidelines of the ACMA as well as corresponding
government requirements for the safety of electrical devices.
CLASS II - DOUBLE INSULATED APPLIANCE
This symbol indicates that the appliance has been designed in such a way
that it does not require a safety connection to electrical earth (ground).
Compliance
This appliance has been fully tested and meets all requirements as set out by
standards AS/NZS 60335.1 and AS/NZS 60335.2.65.

14 After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Responsible disposal
At the end of its working life, do not throw this appliance out with your
household rubbish. Electrical and electronic products contain substances
that can have a detrimental effect on the environment and human health
if disposed of inappropriately. Observe any local regulations regarding the
disposal of electrical consumer goods and dispose of it appropriately for
recycling. Contact your local authorities for advice on recycling facilities in
your area.
Other Useful Information (Cont.)

15
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]

After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [e-mail]
Warranty returns
Should you for any reason need to return this product for a warranty
claim, make sure to include all accessories with the product.
Product does not work?
If you encounter problems with this product, or if it fails to perform
to your expectations, make sure to contact our After Sales Support
Centre on (AU) 1300 886 649 or (NZ) 0800 836 761 for advice.
Distributed by Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO BOX 6056 Frenchs Forest, Australia NSW 2086
Customer Helpline:
(AU) 1300 886 649 (NZ) 0800 836 761
Email: [email protected]
For an electronic version of this manual, please contact our after sales support centre.
IM Version No: V1.0 Issue: May 2020