European Touch Petite Spa User manual

Doc ID: 01080001 Revision: B Technical Support: 800-626-6912 Page 1
The World’s Finest Pedicure Spas
PETITE SPA
OWNER’SMANUAL

Doc ID: 01080001 Revision: B Technical Support: 800-626-6912 Page 2
European Touch Limited Warranty
European Touch manufactures its Petite Spaunder high standards of workmanship and with
high quality materials. Accordingly, European Touch expressly warrants their products as
follows:
To the original owner of the Petite Spa(herein called “pedicure spa”). European Touch may
repair or exchange at its option, any pedicure spa found to be defective in material or
workmanship upon inspection by an authorized representative of European Touch. This
warranty covers the following components for the following time periods:
♦Recirculating pump: Two (2) years from date of shipment.
♦Pedicure spa and plumbing parts: One year from date of shipment.
♦Pedicure spa shell: One year from date of shipment.
The exchange of a pedicure spa is limited to supplying a replacement pedicure spa of
comparable style and size. Owner must pay all labor and shipping charges necessary to
replace or repair the pedicure spa. NO CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT
DAMAGES WILL BE ALLOWED WHATSOEVER. This warranty does not apply if the pedicure
spa has been subject to misapplication, improper installation or maintenance, negligence,
proper cleaning guidelines are not followed, or other circumstances beyond European Touch’s
control.
Exclusions
1. Damage to pump parts and/or motor parts due to loss of prime or obstruction in plumbing
lines, etc.
2. Staining, fading or discoloration of plastic surfaces due to exposure and/or the use of
harmful cleaning agents or chemicals.
3. Staining, fading or discoloration caused by improper or poor water additives not related
to maintenance of proper water are not covered by this warranty.
4. Damage resulting from standing in the basin.
5. Freight damage, misuse, neglect, accident, natural disaster, and abuse.
6. Unauthorized repairs.
Should service be required for any reason of any defect or any malfunction during the warranty
period, please contact:European Touch, Technical Support Department
8301 W Parkland Court, Milwaukee, WI, 53223
Phone Number: 414-357-7016, Toll Free: 1-800-626-6912, Fax: [phone]
Web: www.europeantouch.com
E-mail: [e-mail]
[e-mail]
The owner agrees by using this pedicure spa that the obligation of European Touch shall not
extend to indirect or contingent damage, of injury, which may result from such use that the
obligation of European Touch are limited to those set forth herein, and other obligations,
expressed or implied are assumed by European Touch. No dealer or other person has any
authority to make any warranties or representatives concerning European Touch or its
products. Accordingly, European Touch is not responsible for any such warranties or
representations. This warranty gives you specific legal rights. And you may also have other
rights which vary from state to state.

Doc ID: 01080001 Revision: B Technical Support: 800-626-6912 Page 3
Inspection of the Petite Spa
Inspect the Petite Spaand packaging. If any damage to the Petite Spaor its packaging is
visible, please contact your local Petite Spareseller or call European Touch Customer
Support at 800-626-6912.
Important Information
Serial Number:
Work Order Number:
Installed By:
Installation Date:
The serial number is located on a white
label on the power cord of the Petite
Spa.
The work order (WO) is located on the
UL label. The UL label is located next to
where the power cord enters the Petite
Spa.
Do not remove the tags from the electrical cord.

Doc ID: 01080001 Revision: B Technical Support: 800-626-6912 Page 4
Table of Contents
European Touch Limited Warranty....................................................................2
Exclusions..............................................................................................................................2
Inspection of the Petite Spa............................................................................3
Important Information.............................................................................................................3
Introduction ..........................................................................................................5
Precautions............................................................................................................................5
Very Important! Do Not Stand In Tub!....................................................................................5
Receipt & Inspection..............................................................................................................5
Warning..................................................................................................................................5
Petite SpaSpecifications ................................................................................6
Parts & Contents..................................................................................................7
Petite SpaOperating Instructions..................................................................8
Electrical Outlet......................................................................................................................8
Filling and Running the Petite Spa  ......................................................................................8
Draining the Petite Spa  .....................................................................................................10
Cleaning your Petite Spa...............................................................................12
Between Each Customer .....................................................................................................12
Daily Flushing of the Whirlpool System................................................................................12
Once a Week Overnight Cleaning........................................................................................12
Cleaning and Disinfecting Records......................................................................................12
Removal / Replacing Jet Parts.............................................................................................13
Pedicure Product Guidelines............................................................................14
History and Notes ..............................................................................................15
800-626-6912 414-357-7016
Fax: [phone]
[e-mail] [e-mail]
www.europeantouch.com

Doc ID: 01080001 Revision: B Technical Support: 800-626-6912 Page 5
Introduction
European Touch sincerely thanks you for your spa purchase! The Petite Spa(herein called
pedicure spa) has been developed and is manufactured by European Touch. This innovative
whirlpool pedicure spa has been designed to serve you dependably for many years. Please
take time to read through this entire manual before installation and use.
Please read and follow instructions carefully!
Precautions
♦Excessive water temperature is dangerous and should be checked before use.
Maximum temperature of the water inside the pedicure spa tub should never exceed
100 degrees Fahrenheit.
Very Important! Do Not Stand In Tub!
♦The pedicure spa has been designed to massage the feet and toes with gentle water
movement. The tub is not intended to be stood in. Standing in tub may cause severe
damage to the unit as well as possible serious injury to the person. Never bring and/or
operate any electrical devices into or near the pedicure spa.
Receipt & Inspection
♦Thoroughly inspect each shipment immediately upon arrival. It is important that you
notify the driver of any damage and insist on a notation directly on the face of the freight
bill. Failure to note damage on the face of the freight bill may impede and/or prevent
any claims that you may have against the carrier. If concealed loss or damage is found,
you must notify the carrier at once and request an inspection. Do not discard the
shipping carton. If you give the carrier a clear receipt for goods that have been
damaged in transit, you do so at your own risk and expense.
Warning
♦Individuals experiencing pain or discomfort… Discontinue use of spa immediately
and consult a physician.
♦Diabetics and individuals whom have poor circulation… Consult a physician before
using.
♦Individuals whom have any kind of fungal infection, swelling, fracture, or persistent pain
or if any areas of their feet or legs are inflamed or have open wounds… Do not use the
spa.
•European touch reserves the right to make changes in product characteristics,
packaging, colors, and design at anytime without notice.

Doc ID: 01080001 Revision: B Technical Support: 800-626-6912 Page 6
Petite SpaSpecifications
Overall Dimensions: 27 1/2”L (70.5cm) x 27”W (70cm) x
19”H (48cm)
Shipping Dimensions: 36”L (93cm) x 42”W (109cm) x 27”H
(70cm)
Empty Weight: 55lbs. (24kg) Filled Weight: 95lbs.
(43kg)
UPS Shipping Weight: 99lbs. (44.8kg)
Capacity of Tub: 5.4 U.S. gallons (20.4L)
Whirlpool Pump Motor: 1/2 HP, 110V, 60HZ (220 volt and T-
Mark voltages also available)
Power Source: 110V AC / 5Amp, 60HZ (GFCI Protected)
Caution: Pedicure spa must conform to all local and national electrical codes.
Construction: Linear Low Density Polyethylene (LLDPE), self-contained, pre-plumbed
Hydro-Therapeutic Jet System: PVC, two (2) fully-directional jets, built-in air control
Electrical Switches: One (1) push ON/OFF, air-activated safety switch for whirlpool pump
Fill & Drain Hoses: 1/2” ID x 7’ (213cm), braided nylon, brass fittings, plastic quick-disconnects
UL Listed • CE Certified: Complies with ASME/ANSI Whirlpool Bathtub Specs. ASME/ANSI
A112.19.7M-1995 and A112.19.8M-1995
Limited Warranty: One (1) year from date of shipment, Whirlpool Pump Two (2) years; Four
(4) commercial-duty casters, front two (2) feature locking mechanism
.
Due to our policy of continuous improvements, all specifications are subject to change without notice.

Doc ID: 01080001 Revision: B Technical Support: 800-626-6912 Page 7
Parts & Contents
Item, Part Number, & Description
1 multi Petite Shell 10 01150006 Suction Pipe Assembly
2 01010023 Footrest – Center 11 01150002 Discharge Valve Assembly
3 01010021 Petite Tub Cover 12 01150004 Jet Sub-Assembly
4 01010031 Footrest – Left Side 13 01010020 Spill Tray
5 01010032 Footrest – Right Side 14 01130003 5/16 X Bolt
6 01130006 Rivet – Aluminum 12 15 01130005 5/16 Locknut
7 030130002 Air Button 16 01040002 Whirlpool pump
8 03010008 Suction Cover 17 01130002 Front Caster – Locking
9 03010010 Suction Head Guard 17A 01130010 Rear Caster – Non-
Locking

Doc ID: 01080001 Revision: B Technical Support: 800-626-6912 Page 8
Petite SpaOperating Instructions
Electrical Outlet
Your Petite Spashould be conveniently located near adequate utilities during use. A 115v,
60hz GFCI protected outlet must be used. Do not operate the pedicure spa without GFCI
protection. The Petite Spais also available in a 100v and 220v version. Warning: Do not use
extension cords with the pedicure spa.
Filling and Running the Petite Spa
Replace the faucet aerator with the faucet
adaptor included in the hose kit.
Screw the white quick connect adaptor into
the blue female hose. Connect the adaptor
to the faucet by sliding the white sleeve
down while sliding the connector onto the
faucet adaptor.
The discharge valve is located at the bottom
of the spa. Make sure that the valve is
closed before filling with water.
The discharge valve is closed when the
valve handle is horizontal.
4
3
1
2

Doc ID: 01080001 Revision: B Technical Support: 800-626-6912 Page 9
Fill the spa with warm water. It is not
recommended that the water temperature
exceeds 100 degrees F.
Fill the tub with water to the wavy line on the
tub wall.
The on/off button is located underneath the
footrest. Push it once to start the spa, push
it again to stop the spa.
Adjust the pressure of the jets by turning the
round adjusting cover on each jet. To adjust
the direction of the water flow, move the jet
eyeball located in the center of the jet
assembly.
7
6
5
8

Doc ID: 01080001 Revision: B Technical Support: 800-626-6912 Page 10
Draining the Petite Spa
Close the jets by turning the adjusting cover
clockwise, so that no water flows through the
jets.
Turn the spa off by pushing the on/off button
located under the footrest.
Screw the orange disconnect adapter to the
male hose. Slide the orange quick connect
onto the discharge valve. Make sure that the
connection is secure.
Route the discharge hose into a drain or sink.
Open the discharge valve by turning the
handle so that it is straight with the discharge
valve.
1
3
4
5
2

Doc ID: 01080001 Revision: B Technical Support: 800-626-6912 Page 11
Make sure the hose is secure, and then turn
the spa on by pushing the on/off button
located under the footrest.
Run the pump until the water stops draining
out of the hose. It is normal for a low volume
of water to run out of the jets while the spa is
draining.
Turn the spa off by pushing the on/off button
located under the footrest.
Close the discharge valve handle and
disconnect the drain hose from the discharge
valve.
Pull the drip pan out about halfway and
slowly open the discharge valve. Drain the
remaining water into the drip pan and pour
the water into a drain or sink. Repeat this
until there is no more water draining out.
Once this is done, close the discharge valve
handle.
8
9
10
7
6

Doc ID: 01080001 Revision: B Technical Support: 800-626-6912 Page 12
Cleaning your Petite Spa
Please check with your state board for required cleaning and disinfecting procedures.
It is extremely important to clean and disinfect your pedicure spa after each pedicure, after the last
pedicure of the day, and once a week for overnight cleaning. Regular cleaning will help keep your
pedicure spa in good working condition. Proper and continuous cleaning will kill harmful bacteria and
germs that can cause infection.
Between Each Customer
1. Drain water from the pedicure spa. Remove all debris.
2. Clean all the surfaces of the pedicure spa. Use low-sudsing soap or detergent, and a non-
abrasive brush. Remove all visible residue from basin and then rinse.
3. Disinfect all surfaces and components with an EPA registered disinfectant in accordance with
your state board requirements. *EPA disinfectants require ten-minute contact.
4. Rinse off with clean water and wipe all parts dry with clean towel.
Daily Flushing of the Whirlpool System
The pedicure spa must be thoroughly cleaned after the last pedicure of the day in the following manner:
Note: Your state and local board guidelines must be followed. Check with boards for
requirements.
1. Remove the suction fitting cover with a Phillips head screwdriver.
2. All debris trapped behind the screen needs to be removed.
3. The inlet behind the screen needs to be cleaned with low-sudsing soap or detergent, water, and
a non-abrasive brush.
4. Before replacing the screen, clean it with a chlorine bleach solution of 1(one) teaspoon of 5%
chlorine bleach to 1 gallon of water, or Totally immerse the suction fitting cover in an EPA
registered disinfectant in accordance with your state board requirements.
5. Replace the suction fitting cover with a Phillips head screwdriver. Do not over tighten the
mounting screw.
CAUTION: Do not run the pedicure spa whirlpool jets without the suction fitting cover in place.
6. Fill the tub basin with warm water near the wave mark on the rear wall.
7. Turn the whirlpool jets on.
8. Add three teaspoons of low-foaming dishwasher crystals (not gel) and 1 ounce of household
bleach for up to six gallons of water to the tub basin. Turn on the whirlpool jets and let run for ten
minutes.
9. Turn the jets off and drain water from the basin.
10. Rinse the basin and all other components with clean water.
11. Refill the basin with clean water. Turn the jets on and run for one minute.
12. Drain water from the basin and turn off the whirlpool jets. Then wipe dry with a clean towel.
♦Note: Make a record of the date and time of this cleaning and disinfecting.
Once a Week Overnight Cleaning
In addition to the daily cleaning, the following cleaning procedures must be done every week.
1. Follow steps one through seven as listed above as in “Daily flushing of the Whirlpool System”
2. Turn jets off after ten minutes and let solution sit over night in basin (six to ten hours).
3. The next morning drain, rinse, and wipe dry with a clean towel.
♦Note: Make a record of the date and time of this cleaning and disinfecting.
Cleaning and Disinfecting Records
A record must be made of the date and time of each cleaning and disinfecting as required in the above
procedures. This record should be made available when requested by a customer or inspector.
♦Note: Failure to follow these instructions may result in voiding warranty coverage.

Doc ID: 01080001 Revision: B Technical Support: 800-626-6912 Page 13
Removal / Replacing Jet Parts
Tools required:
Pliers
7/8" deep well socket with extension
Check your state and local regulations for cleaning procedures. Links to your state boards can
be found on our web site, at www.europeantouch.com. Refer to the cleaning procedure page
headed “Cleaning your Petite Spa,” page 12, for cleaning recommendations.
Follow the steps below for cleaning and replacing parts:
Step 1: Remove the jet eyeball using the
pliers. Pull forward with a quick tug. Step 3: Remove the jet nozzle and nut using a 7/8" deep-well socket and extension.
Step 2: Remove the adjusting cover.
This should pull out. Step 4: For cleaning, refer to “Cleaning your
Petite Spa” on page 12. Reassemble the jet
assembly. The jet nozzle nut should be hand
tightened using the socket with extension. If the
adjustment cover is hard to turn, slightly loosen
the jet nozzle nut.
Step 5: Reverse steps to reassemble.
Clean this area, using low
foaming soap and
disinfectant, with a brush.
Remove all visible residue
and rinse with clean water.

Doc ID: 01080001 Revision: B Technical Support: 800-626-6912 Page 14
Pedicure Product Guidelines
Because there are so many different products on the market, it is difficult for us to list all of the
pedicure products that are safe to use in our spas. However, the following guidelines can be
used:
♦It has been determined that products containing non-dissolving abrasives (such as sand
and sea salts) will not harm the internal component structure of your pedicure spa as
long as the entire European Touch cleaning requirements are followed without deviation.
♦Oil based products may be used in your pedicure spa as long as the cleaning
requirements are met.
♦Do not use any products containing a foaming agent; this will cause excessive foam.
♦Please use pedicure products and cleaning solutions in accordance with each
manufacturer’s directions.
♦It is your responsibility to understand and follow your states regulations.
European Touch whirlpool pedicure spas will give you many years of service as long as proper
precautions and precise cleaning and operating instructions are followed. It is the responsibility
of the spa owner to properly clean the spa. If you are experiencing problems cleaning your spa,
please contact the manufacturer of your pedicure products or European Touch Technical
Support @ 800-626-6912.

Doc ID: 01080001 Revision: B Technical Support: 800-626-6912 Page 15
History and Notes

Doc ID: 01080001 Revision: B Technical Support: 800-626-6912 Page 16
EUROPEAN TOUCH
8301 W. Parkland Court
Milwaukee, WI 53223
Phone Number: 414-357-7016
Toll Free: 800-626-6912
Fax: [phone]
Web Site: www.europeantouch.com
Email: [e-mail]
[e-mail]