EuroSun EU-T715Pro User manual

33
02-16
17-35

Contents
IMPORTANT SAFETY INSTRUCTIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 02
OPERATION AND MAINTENANCE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 03
INSTALLATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - 08
POWER CONNECTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09
INSTRUCTION FOR USE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
POWER SETTING - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
CLEANING - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
WARNING CODE DISPLAY AND INSPECTION - - - - - - - - - - - - - - - - - - - - - - - - 15
AUTOMATIC SHUT OFF ----------------------------------------- 16
CUSTOMER CARE SERVICE ------------------------------------- 16

WE KNOW HEAT AND CONTROL IT TO WHAT YOU WANT
2
IMPORTANT SAFETY INSTRUCTIONS
Safety Warnings
Your safety is important to us. Please read this information before using
your cooktop.
Installation
Electrical Shock Hazard
• Disconnect the appliance from the mains electricity supply before
carrying out any work or maintenance on it.
• Connection to a good earth wiring system is essential and mandatory.
• Alterations to the domestic wiring system must only be made by a
qualified electrician.
• Failure to follow this advice may result in electrical shock or death.
Cut Hazard
• Take care - panel edges are sharp.
• Failure to use caution could result in injury or cuts.
Important safety instructions
• Read these instructions carefully before installing or using this appliance.
• No combustible material or products should be placed on this appliance
at any time.
• Please make this information available to the person responsible for
installing the appliance as it could reduce your installation costs.
• In order to avoid a hazard, this appliance must be installed according to
these instructions for installation.
• This appliance is to be properly installed and earthed only by a suitably
qualified person.
• This appliance should be connected to a circuit which incorporates an
isolating switch providing full disconnection from the power supply.
• Failure to install the appliance correctly could invalidate any warranty or
liability claims.

WE KNOW HEAT AND CONTROL IT TO WHAT YOU WANT
3
OPERATION AND MAINTENANCE
Electrical Shock Hazard
• Do not cook on a broken or cracked cooktop. If the cooktop surface
should break or crack,switch the appliance off immediately at the mains
power supply (wall switch) and contact a qualified technician.
• Switch the cooktop off at the wall before cleaning or maintenance.
• Failure to follow this advice may result in electrical shock or death.
Health Hazard
• This appliance complies with electromagnetic safety standards.
Hot Surface Hazard
• During use, accessible parts of this appliance will become hot enough to
cause burns.
• Do not let your body, clothing or any item other than suitable cookware
contact the Induction glass until the surface is cool.
• Metallic objects such as knives, forks, spoons and lids should not be
placed on the cooker surface since they can get hot
• Keep children away.
• Handles of saucepans may be hot to touch. Check saucepan handles do
not overhang other cooking zones that are on. Keep handles out of reach
of children.
• Failure to follow this advice could result in burns and scalds.
Cut Hazard
• The razor-sharp blade of a cooktop scraper is exposed when the safety
cover is retracted.Use with extreme care and always store safely and out
of reach of children.
• Failure to use caution could result in injury or cuts.
Important safety instructions
• Never leave the appliance unattended when in use. Boilover causes
smoking and greasy spillovers that may ignite.

WE KNOW HEAT AND CONTROL IT TO WHAT YOU WANT
4
• Never use your appliance as a work or storage surface.
• Never leave any objects or utensils on the appliance.
• Never use your appliance for warming or heating the room.
• After use, always turn off the cooking zones and the cooktop as
described in this manual (i.e. by using the touch controls).
• Do not allow children to play with the appliance or sit, stand, or climb on
it.
• Do not store items of interest to children in cabinets above the appliance.
Children climbing on the cooktop could be seriously injured.
• Do not leave children alone or unattended in the area where the
appliance is in use.
• Children or persons with a disability which limits their ability to use the
appliance should have a responsible and competent person to instruct
them in its use. The instructor should be satisfied that they can use the
appliance without danger to themselves or their surroundings.
• Do not repair or replace any part of the appliance unless specifically
recommended in the manual. All other servicing should be done by a
qualified technician.
• Do not use a steam cleaner to clean your cooktop.
• Do not place or drop heavy objects on your cooktop.
• Do not stand on your cooktop.
• Do not use pans with jagged edges or drag pans across the Induction
glass surface as this can scratch the glass.
• Do not use scourers or any other harsh abrasive cleaning agents to clean
your cooktop, as these can scratch the Induction glass.
• If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
•This appliance is intended to be used in household and similar
applications such as: -staff kitchen areas in shops, offices and other
working environments; -farm houses; -by clients in hotels, motels and

WE KNOW HEAT AND CONTROL IT TO WHAT YOU WANT
5
other residential type environments ; -bed and breakfast type
environments.
•WARNING: The appliance and its accessible parts become hot during
use.
Care should be taken to avoid touching heating elements.
Children less than 8 years of age shall be kept away unless continuously
supervised.
•This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved.
•Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
•WARNING: Unattended cooking on a cooker with fat or oil can be
dangerous and may result in fire. NEVER try to extinguish a fire with water,
but switch off the appliance and then cover flame e.g. with a lid or a fire
blanket.
•WARNING: Danger of fire: do not store items on the cooking surfaces.
• Warning: If the surface is cracked, switch off the appliance to avoid the
possibility of electric shock, for cooker surfaces of glass-ceramic or similar
material which protect live parts
•A steam cleaner is not to be used.
•The appliance is not intended to be operated by means of an external
timer or separate remote-control system.
Congratulations on the purchase of your new Ceramic Cooker.
We recommend that you spend some time to read this Instruction /
Installation Manual in order to fully understand how to install correctly and
operate it.

WE KNOW HEAT AND CONTROL IT TO WHAT YOU WANT
6
For installation, please read the installation section.
Read all the safety instructions carefully before use and keep this
Instruction / Installation Manual for future reference.
• This appliance must be properly installed and grounded by a qualified
technician . Only connect to a properly grounded outlet. See electric
preparation and connection instructions in the installation instructions.
• Do not repair or replace any part of this appliance unless specifically
recommended. Refer service only to an authorized service center.
• Do not allow children to use this appliance unless closely supervised by
an adult. Children and pets should not be left alone or unattended in the
area where the appliance is in use . Never allow children to sit or stand on
any part of the appliance.
• Do not store flammable materials in or near the ceramic hob.
• Never use the ceramic hob to warm or heat a room.
• Use proper pan size. This appliance is equipped with one or more
surface units of different sizes .Select pans with having flat bottoms large
enough to cover the surface unit heating element.The use of undersized
pans will expose a portion of the heating element to direct contact and may
result in ignition of clothing . Proper coverage of pots and pans to burner
will also improve efficiency.
• Do not cook on a broken working surface .If your hob should break or
crack ,cleaning solutions and spillovers may penetrate the broken hob and
create a risk of electric shock . Contact a qualified technician immediately.
• Clean this appliance with caution. Be careful to avoid steam burns if a
wet sponge or cloth is used to wipe spills on a hot cooking area . Some
cleaners can produce noxious fumes if applied to a hot surface.
Choosing the right Cookware for induction cooking side

WE KNOW HEAT AND CONTROL IT TO WHAT YOU WANT
7
• Only use cookware with a base suitable
for induction
cooking. Look for the induction symbol on the
packaging or on the bottom of the pan.
• You can check whether your cookware is suitable by carrying out a
magnet test. Move a magnet towards the base of the pan. If it is attracted,
the pan is suitable for induction.
• If you do not have a magnet:
1. Put some water in the pan you want to check.
2. If does not flash in the display and the water is heating, the pan is
suitable.
• Cookware made from the following materials is not suitable: pure
stainless steel, aluminium or
copper without a magnetic base, glass, wood, porcelain, ceramic, and
earthenware.
Do not use cookware with jagged edges or a curved base.
Make sure that the base of your pan is smooth, sits flat against the glass,
and is the same size as the cooking zone. Always centre your pan on the
cooking zone.
Always lift pans off the ceramic hob – do not slide, or they may scratch the
glass.

WE KNOW HEAT AND CONTROL IT TO WHAT YOU WANT
8
A) Warning！Do not
use aluminum pot！
B) The product is not warranty by the
cause of Cockroaches, Lizards and
other insects that cause short-circuit,
damaging the product.
INSTALLATION
1. 50 mm space should be left around the hole and there are ventilation
outlets (refer to figure (1). The worktop should be at least 30mm thick and
made of heat resistant material.

WE KNOW HEAT AND CONTROL IT TO WHAT YOU WANT
9
2. It is essential that the hob is well ventilated and that the air intake and
exit are not blocked.
3.Make sure the hob is correctly installed as shown in Figure(2).
POWER CONNECTION
The socket should be connected in compliance with the relevant standard
to
a single pole circuit breaker the method of connection is shown in Figure3
(1).If the cable is damaged or needs replacing, this should be done by an
after sales technician using the proper tools so as to avoid any accidents.

WE KNOW HEAT AND CONTROL IT TO WHAT YOU WANT
10
(2).If the appliance is being connected directly to the mains supply an
omnipolar circuit breaker must be installed with a minimum gap of 3mm
between the contacts.
(3).The installer must ensure that the correct electrical connection has
been made and that it complies with safety regulations.
(4).The cable must not be bent or compressed the cable must be checked
regularly and only replaced by a properly qualified person.
INSTRUCTION FOR USE
Product View:
1ON/OFF
2Defrost
3Slider
4Timer
5Pause
6Lock
7Frying
8Warm
Basic Functions:
Power on:
⑦
⑧
⑦
⑧
①
②
③
④
③
⑤
⑥

WE KNOW HEAT AND CONTROL IT TO WHAT YOU WANT
11
when power on,all the LED light 1s with beep,then go off,if working surface
temperature over 60℃on this model,the related digital LED will show
“H”;and all the buttons are invalid except Power key.
ON/OFF:
Press power key to start stand by model,Buzzer beeps once,the related
LED will show flashing "H" if it's working surface temperature over 60℃,if
not,the digital LED will show "-".timer LED is off when there is no time
setting.
it will return to power on model if have not any operation within 2min.Press
power key can also directly return to power on model.
Power Selecting:
The right or left cooking zone is selected,when you push the
slider(anywhere)one time.Now the zone is selected. When the zone is
selected the power display will show “0” and start to blink.
Now you can use your finger again on the slider to select the power
level(from 0-9).The power display above indicates the power level.
After 5 seconds the cooktop will go back into stand-by mode and the
power display is no more blinking.
Lock:
Press for 3s to start this function,The indicator above the button will light
on,the digital LED will show "Lo".on this model,all the buttons are
invalid,however for security the ON/OFF button is still active, so the
cooktop can be shut down anytime; if the user turns the cooktop on, the
cooktop remains in Lock mode.
Press 3s to turn off this function.
If timer is working at the same,the lock model and time will take a back and
forth display in a frequency of 5s.
Booster:
Activate Booster= Select first the cooking zone and then press the 9th
power level key for 3S,now the Booster will be activated and the power

WE KNOW HEAT AND CONTROL IT TO WHAT YOU WANT
12
display will show [ P ],
When is turned off the Booster function , press any button on the Slider,
the Booster function will be canceled and returned to the selected new
power level.
Note:The booster function shall turn off automatically after 3 minutes, and
then resume on power level 9.
Timer:
The timer function allows you to time the cooking process up to 99
minutes.
The left and right zone can be timed independently.
Activate Timer = Select first the cooking zone,the power LED will blink,then
press timer key,the timer LED will show”00”,you can select the timer by
pressing [ + ] or [ - ],the indicator light for the cooking zone will go on at
the same time and display that the timer is activated;
Deactivate Timer = Select the timed cooking zone and press timer key,then
press [ + ] or [ - ] to adjust the timer,when the timer jumps to [ 00 ],the
indicator light will go off as well.
Note:If you press [ + ] or [ - ] for 2 seconds it will jump like this 10 … 20 …
30…
If you only press once the buttons it will jump like this 1 … 2 … 3…
When the timer is finished, the user will hear a BEEP tone.
During the selection phase the timer display is blinking. After selecting the
time, wait 3 seconds, now the display will stop blinking. The timer display
will always show the time of the selected zone. In standby mode, it shows
the time of the shorter time,the related indicator will blink.
Keep Warm:
The Keep-Warm function is specially made to keep the customers food
warm. The temperature shall remain 70-80°C;
The left warm button controls left zone,the right warm button controls right
zone;

WE KNOW HEAT AND CONTROL IT TO WHAT YOU WANT
13
Activate Keep-Warm =Press Keep-Warm, now the Keep-Warm function
will be activated,indicator will go on and the power display will show [ U ]
Deactivate Keep-Warm = Press Keep-Warm, now the Keep-Warm function
will be deactivated and the power display will show [ 0 ].
Defrost：
The defrost function is specially made to defrost the customers food more
quicker. The temperature shall remain between 50-70°C.
Activate Defrost = Select first the cooking zone and then press
Defrost,now the Defrost function will be activated and the power display
will show[ D ]
Deactivate Defrost = Select first the cooking zone and then press Defrost,
now the Defrost function will be deactivated and the power display will
show [ 0 ].
Pause&Recall Button:
The Pause & Recall function allows you to stop all cooking functions and
timer. The hob will save the cooking function. After pressing the pause
function again, the saved cooking settings and time will resume.
Activate Pause:Press Pause and both power displays will show ||,the
indicator will go on;
Deactivate Pause = Press and the power displays will show the saved
power settings;
Note:If the Pause function is not deactivated after 10 min, the cooktop will
shut down automatically.
Frying:
The left Frying button controls left zone,the right Frying button controls
right zone;
Activate Pause = Press Frying button and power displays will show “F”,the
indicator will go on;
Deactivate Pause = Press Frying button again and the power displays will
show [ 0 ].

WE KNOW HEAT AND CONTROL IT TO WHAT YOU WANT
14
POWER SETTING
L
P
B
1
2
3
4
5
6
7
8
9
Boo
ster
Left
210mm
400
500
600
700
800
100
0
120
0
160
0
210
0
3000
Right
230mm
400
500
600
700
800
120
0
160
0
180
0
230
0
3500
CLEANING
IMPORTANT: If the ceramic glass surface breaks or you notice
cracks in it, disconnect the equipment. Call your Repair Service
Technician.
Clean the ceramic glass surface frequently,
when it is cool. Never use abrasive
products or pads. Clean with a damp cloth
and soapy water.
Once a week, clean thoroughly with
specific products that preserve and protect the
hobs.
Scrape off stuck on stuck dirt with a scraper.

WE KNOW HEAT AND CONTROL IT TO WHAT YOU WANT
15
If sugar (or sugary matter) or plastic is
accidentally burnt on the ceramic glass,
remove
at once with the scraper while still hot.
Otherwise it may leave a permanent mark.
Do not use the hob as a work surface.
Be particularly careful with dirt or dust from
vegetables, cleaning powders, etc. which
may scratch the surface when pans are slid
over it.
WARNING CODE DISPLAY AND INSPECTION
Code
Possible Cause
Solution
H
Working surface
temperature over 60℃
on stand by and power
off models
Don't touch the hot surface,the
code will off when temperature
lower than 60℃
U
No Pan indicator for
induction hob
Put on the suitable pan
E1/E2
Abnormal voltage for
power supply,the normal
range is 220V-240V
Check whether power supply is
normal. Power on after power
supply returns to normal
E3/E4
IGBT temperature
sensor open/short
Check the vent channel if it be
blocked or contact the supplier
E8/E9
Surface NTC sensor
short/open
Check if it was dry burning or
contact the supplier

WE KNOW HEAT AND CONTROL IT TO WHAT YOU WANT
16
AUTOMATIC SHUT OFF
If a hotplate is left on accidentally, it will automatically be switched off after
a period of time has elapsed, depending on the power level that has been
selected.
Working level
Working hours
1-2
6
3-4
5
5
4
6-9
1.5
Defrost
6
Keep Warm
6
Fry
1.5
CUSTOMER CARE SERVICE
If a warning should occur,before calling After Sales Service,please do the
following:
-Check the appliance is correctly plugged in
-Read the above warning code table
If you are still unable to resolve the problem,switch off the appliance,do not
try to dismantle it,and call After Sales Service.

Mục lục
HƯỚNG DẪN SỬ DỤNG AN TOÀN QUAN TRỌNG - - - - - - - - - - - - - - - - - - - - - - - 17
VẬN HÀNH VÀ BẢO TRÌ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18
LẮP ĐẶT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24
KẾT NỐI VỚI NGUỒN ĐIỆN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 25
HƯỚNG DẪN SỬ DỤNG - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 26
CÀI ĐẶT CÔNG SUẤT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 31
LÀM SẠCH - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 32
MÃ CẢNH BÁO HIỂN THỊ VÀ CÁCH KHẮC PHỤC - - - - - - - - - - - - - - - - - - - - - 33
TỰ ĐỘNG TẮT NGUỒN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 34
DỊCH VỤ CHĂM SÓC KHÁCH HÀNG - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 35

CHÚNG TÔI HIỂU RÕ VỀ NHIỆT VÀ KIỂM SOÁT NHIỆT THEO Ý MUỐN CỦA BẠN
17
HƯỚNG DẪN SỬ DỤNG AN TOÀN QUAN TRỌNG
Cảnh báo an toàn
Sự an toàn của bạn là điều rất quan trọng đối với chúng tôi. Vui lòng
đọc kĩ các thông tin hướng dẫn sử dụng trước khi sử dụng bếp.
Lắp đặt
Nguy cơ Điện giật nguy hiểm
• Ngắt thiết bị khỏi nguồn điện chính trước khi thực hiện bất kỳ công tác
xử lý hoặc bảo trì nào.
• Việc kết nối với hệ thống nối đất đúng chuẩn là điều cần thiết và bắt
buộc.
• Việc thực hiện thay đổi hệ thống dây điện bên trong hệ thống bếp chỉ
được phép thực hiện bởi một thợ điện có trình độ.
• Nếu không làm theo các chỉ dẫn này có thể dẫn đến nguy cơ điện giật
hoặc tử vong.
Nguy cơ gây đứt tay
• Hãy cẩn thận - các cạnh của tấm nền khá sắc.
• Không thận trọng khi sử dụng có thể gây ra thương tíc
Hướng dẫn an toàn quan trọng
• Đọc kỹ các hướng dẫn này trước khi lắp đặt hoặc sử dụng thiết bị này.
• Không bao giờ được phép đặt vật liệu hoặc sản phẩm dễ cháy vào thiết
bị này.
• Vui lòng cung cấp thông tin này cho người chịu trách nhiệm lắp đặt
thiết bị vì nó có thể giúp giảm chi phí lắp đặt của bạn.
• Để tránh nguy hiểm, thiết bị này phải được lắp đặt theo các hướng dẫn

CHÚNG TÔI HIỂU RÕ VỀ NHIỆT VÀ KIỂM SOÁT NHIỆT THEO Ý MUỐN CỦA BẠN
18
này trong quá trình lắp đặt.
• Chỉ được phép lắp đặt và tiếp đất cho Thiết bị này đúng phương pháp
bởi một người có trình độ phù hợp.
• Thiết bị này nên được kết nối với một mạch và kết hợp với một công
tắc cách ly mang đến khả năng ngắt kết nối thiết bị hoàn toàn khỏi
nguồn điện.
• Việc lắp đặt đúng thiết bị không đúng cách có thể làm mất quyền lợi
yêu cầu bảo hành hoặc trách nhiệm pháp lý nào.
VẬN HÀNH VÀ BẢO TRÌ
Nguy cơ Điện giật nguy hiểm
• Không nấu ăn trên mặt bếp bị hỏng hoặc nứt. Nếu bề mặt bếp bị vỡ
hoặc nứt, hãy tắt thiết bị ngay lập tức từ nguồn điện chính (công tắc trên
tường) và liên hệ với kỹ thuật viên có trình độ.
• Tắt bếp bằng công tắc trên tường trước khi vệ sinh hoặc bảo dưỡng.
• Nếu không làm theo các chỉ dẫn này có thể dẫn đến nguy cơ điện giật
hoặc tử vong.
Đánh giá Nguy cơ y tế
• Thiết bị này tuân thủ theo các tiêu chuẩn an toàn điện từ.
Nguy cơ từ bề mặt nóng
• Trong khi sử dụng, các bộ phận có thể tiếp xúc của thiết bị này sẽ trở
nên đủ nóng để gây bỏng.
• Không để cơ thể, quần áo hoặc vật dụng nào khác ngoài dụng cụ nấu
ăn phù hợp tiếp xúc với mặt kính cảm ứng từ cho đến khi bề mặt này