Evantair CYD10-7 User manual

Distributed byTempo (Aust) Pty Ltd ABN 70 106 100 252
Unit 7/15 Rodborough Rd,
Frenchs Forest NSW 2086
Telephone: [phone] Fax: [phone]
Email: [email protected]
Care and Cleaning Instructions
The appliance is not designed to be dismantled without special tools.
Please do not attempt to separate the unit.
1. Ensure appliance is disconnected from the power supply and
switched off before attempting any cleaning.
2. Cleaning the exterior of the unit should only be attempted with a
slightly damp, soapy cloth.After wiping down the unit with the soapy
cloth, dry any wet spots with a dry cloth.
3. Use a vacuum cleaner regularly to remove dust and fluff from the
element and grill.
4.When not in use, pack the heater into its original box for best protec-
tion and store in a cool, clean and dry location.
Caution: Never immerse the heater in water for cleaning.
cooler
Instruction Manual
7fin Oil-filled Radiant heater-
model no: CYD10-7

Important Safety Instructions
Please keep this instruction manual in a safe place, along with the
warranty card, purchase receipt and carton for future reference.The
safety precautions enclosed herein reduce the risk of fire, electric shock
and injury when correctly adhered to.
- If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person
in order to avoid hazard.
- The appliance is not intended for use by young children or infirm
persons without supervision.
- Young children should be supervised to ensure that they do not
play with the appliance.
- Do not operate the appliance outdoors
- Power plug must be removed from power socket before
cleaning, servicing, maintenance or moving the appliance.
- The appliance should be placed on a flat surface while in
operation to avoid overturning.
- The appliance should not be operated in a damp place or high
humidity (such as the bathroom)
- Improper installation may result in the risk of fire, electric shock
and or injury.
- The unit has no user-serviceable parts contained within. Do not
attempt to repair, disassemble or modify the appliance.
- Do not insert foreign objects into the safety grille as this may
cause damage to the appliance and/or user.
- Please ensure that the power supply this appliance is intended to
be plugged into matches the power rating on the rating label of
the appliance.
Important Safety Instructions cont’d
- Use the appliance only for the mentioned purpose, namely as a heater
for domestic use. Do not use it as any other application as it could cre-
ate a hazard.
- Do not operate the heater near flammable objects (furniture, cur-
tains, shelves etc).
- Do not operate the heater near liquids (bath-tubs, showers, water
basins, swimming pools etc).
- Do not cover the appliance when it is operating to avoid overheating
risks.
- Never attempt to remove the front grille of the heater.
- Ensure the heater has fully cooled down before attempting to move
or store the heater.
- Do not connect the appliance to extension cords or multiple outlets.
- Never operate the appliance immediately below an outlet.
- Never connect the appliance to a thermal control device or a time
switch to avoid overheating risks when the radiator is moved or cov-
ered.
WARNING:This appliance gets extremely hot during operation and
should be handled with care. Never put flammable objects on or near
the appliance as they could set alight.
Technical Data
- Voltage: 240V ~ 50Hz
- Max power consumption: 1500W

Important features of your heater
Carry handle
-The heater has a convenient
carry handle for portability.
Whisper-quiet
operation
- The heater operates in near
silence.
3 heat settings
- select between Low (1), Medi-
um (II) and high (1+II) for your
heating requirements.
Adjustable thermostat
- Adjust heating temperature to
desired temperature
Pendulum safety switch
- Built-in safety switch ensures
that if the heater cuts out if it
is accidently tipped over,

Assembling the Heater
NOTE: DO NOT OPERATE THE HEATER WITHOUT FRONT
STAND AND REAR WHEEL ASSEMBLIES ATTACHED TO THE BOT-
TOM OF THE UNIT AS THE HEATER WILL GETSVERY HOT DUR-
ING OPERATION
Step 1.Turn the heater upside down on a stable surface for ease of as-
sembly. Locate rear wheel assembly as pictured in Figure 1.
Step 2. Use long screws supplied to fix rear wheel assembly into place
as pictured by Figure 2.
Step 3. Unwrap supply cord from cord storage reel.
Step 4. Use short screws supplied to fix front stand into place, as pic-
tured in Figure 4.
Step 5. Ensure all screws are properly tightened before attempting to
use the heater
How to use your Heater
CAUTION: Only operate the product in an upright position. Operat-
ing the product in any other position could create a hazardous situa-
tion.
1. Place the product on a flat, stable, surface.
2. Plug the Power Cord into a standard 240V AC electrical outlet.
3. Turn the thermostat knob clockwise to “MAX” position.
4. Press the power switch button(s) either “I” (Low heating) or
“II” (Medium heating) or both “I+II” (High heating).
5. Allow the heater to warm up until the ambient room tempera-
ture reaches your desired comfort level.
6. When the room reaches the desired temperature, slowly turn
the thermostat knob counter clockwise until you hear a click.This will
automatically set your unit to cycle on and off to maintain the current
room temperature thermostat setting.. Note: It will normally require
approx. 15 minutes to reach the operating temperature.
7. To turn off the heater, press the power switch OFF.The power
indicator light will turn off.
8. Unplug the product from the electrical outlet when it is left
unattended or when not in use.