EVE BUTTON Specification sheet

Room •Zimmer:
Notes •Notizen:
✁
Get Started
Erste Schritte
BackCover with
Sticker Placement
(Page 12)
Cover (Page 1)

Get started •Erste Schritte
1
Customize Eve Button with the included labels and rubber feet.
Nutze die mitgelieferten Sticker und Gummifüße, um Eve Button zu individualisieren.
Press Eve Button once to activate.
Drücke einmal, um Eve Button zu aktivieren.
(2) (3)

2
Get started •Erste Schritte
Download the Elgato Eve app from the App Store.
Lade die Elgato Eve App aus dem App Store herunter.
(4) (5)

Get started •Erste Schritte
Open the Elgato Eve app and tap Add Accessory. Eve will now guide you through
the setup process.
Öffne die Elgato Eve App und tippe auf Zubehör hinzufügen. Eve führt dich nun durch die
Einrichtung.
If you have already set up another accessory, go to Settings in Eve to add
Eve Button to your home.
Wenn du Eve bereits zuvor eingerichtet hast, öffne die Eve-Einstellungen und füge
Eve Button hinzu.
3
(6) (7)

Legal Information •Rechtliche Hinweise
This device complies with part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular in-
stallation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, you are encouraged to try to correct the interference by
one or more of the following measures: reorient or relocate the receiving antenna; increase the separation
between the equipment and receiver; consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
This equipment complies with FCC RF and IC RSS-102 radiation exposure limits set forth for an uncon-
trolled environment. This equipment should be installed and operated with a minimum distance of 0.5
centimeters between the radiator and your body. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be
installed to provide a separation distance of at least 0.5 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.
Changes or modifications not expressly approved by Elgato Systems could void your authority to operate
this device. Purpose of control: operating control; construction of control: plug-in operating control; type 1
action, operating time: continuous.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de
brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement. Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Cet équipement est conforme aux CNR-102 d’Industrie Canada. Cet équipement doit être installé et utilisé
avec une distance minimale de 0.5 centimètres entre le radiateur et votre corps. Cet émetteur ne doit pas
être co-localisée ou opérant en conjonction avec autre antenne ou émetteur. Les antennes utilisées pour
cet émetteur doivent être installés et fournir une distance de séparation d’au moins 0.5 centimètre de toute
personne et doit pas être co-située ni fonctionner en conjonction avec une autre antenne ou émetteur.
For questions about Elgato product compliance with FCC regulations, please contact: Compliance Officer,
Elgato Systems, 900 Kearny St. #750, San Francisco, CA 94133.
Hereby, Elgato Systems declares that this device is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EC. The declaration of conformity is available at
www.elgato.com/doc
Frequency range: 2402 - 2480 MHz, Max RF e.i.r.p power < 3dBm
Product:10EAU9901 •Model: 20EAU9901•Part: 51EAU9902• FCC ID: SNE-TSW-001•IC: 11192A-TSW001
(8) (9)

✁
Reset •Réinitialisation
When replacing the battery, use your finger to open the enclosure. Insert a new
CR2032 battery with the positive (+) side up, and push firm while closing the cover.
Nutze für den Batteriewechsel deinen Finger zum Öffnen des Gehäuses. Setze eine neue CR2032
Batterie mit dem Pluspol (+) nach oben ein und drücke den Deckel beim Schließen fest an.
10s
1 2 3 Please keep your HomeKit setup code in a safe place. You need it to
securely add Eve to your home, and nobody but you has a copy.
Bewahre deinen HomeKit-Code an einem sicheren Platz auf. Du benötigst ihn,
um Eve zu deinem Zuhause hinzuzufügen. Niemand außer dir kennt diesen Code.
Battery & Reset •Batterie & Zurücksetzen
(10) (11)