Evebot Fantasia User manual
Fantasia
Creating fantasy in your cup!
User Manual
Before operating this unit, please read these
instructions completely and save them
Introduction
Power switch
FancyBox
replacement
lid
Operating light
Touch screen
Tray
USB WiFi adaptor
FRONT BACK
USB update port
Power port
Preparation
1
2
3
4
5
Open the FancyBox replacement lid and remove the X-axis locking rod,
Please complete the following steps before you use the machine
①
Open the FancyBox-replacement lid
②Screw off the locking rod from position A (See Figure 1 below)
③Screw in the locking rod to position B (See Figure 1 below)
Connect the machine to the electricity supply (See below Figure 3)
Install FancyBox
Connect WiFi
Obtain the unique machine URL and QR code under Settings Interface
Note: Customer can upload image through this URL or QR code
Note: Please screw off the lock rod from position B and screw in
it to position C during the course of transportation(See Figure 2
below)
ALocking rod
Bc
Fixing hole
Fixing hole
Figure 1 Figure 2
Figure 3
Warranty
Restrictions in use
Do not use under the below situations , to avoid electric shocks, fire or other damage
1. Easy to dump and other unstable place
2. High temperature and heavy wet place, such as bathroom
Warranty terms
No-warranty terms
1. Expired warranty
2. Damages caused by force majeure
3. Violations against warranty, including but not limited to customer induced damage,
such as self-repairs, exposure to water, damage caused by misuse, alternation,
failure to comply with product manual, and so on.
1. Evebot will offer a free firmware upgrade service for lifetime
2. Manufacturing defects in materials and workmanship of the product, please
contact dealer for repair or replacement
3. Evebot will provide a 12 month warranty, during the warranty period, if any
accessory defect is inspected and confirmed by dealer, a free replacement
service shall be provided.
4. The Limited Warranty starts from the day the customer receives the product.
Usage
1
2
3
Upload image simply by scanning QR code or input URL
Select the image and adjust the cup size, image brightness and contrast
Create high resolution image or text in seconds onto your favorite frothy
beverages,both hot and cold
Maintenance
Undraw the lock catch Undraw the lock catch
Put the new FancyBox
into slot
Undraw the lock catch and
remove the FancyBox
1.Replace FancyBox
Each FancyBox can prints about 500 cups ,you can resume buying through local
dealers or our offical website: www.evebot.cc
2. Daily Clean
This machine does not need complex maintenance, simply wipe clean the tray and
surface with a soft damp cloth at the end of each day
Product parameters
Special instructions
Transportation
In use
1. Make sure that remove lock rod from position B and screw in it to position C when
transporting
1. At emergence of an unusual sound, collision , please switch off the device at once
2.Make sure all the cushioning packages have been installation correctly, to avoid
transport damage
EB-FT3
Product model Electric parameters
Cup height
Cup diameter
Outline size
Net Weight
Network parameters: WiFi 802.11b/g/n Operating power
27cm x34cm x 41cm
AC 110V ~220V 50/60Hz
5cm ~ 18cm
4cm ~10cm
200W
10kg
2. If printing pattern failed ,please stop running and take the FancyBox out, wiping the
spray-head gently with a tissue, until appear the color
3. Please put the cup in the center of tray, to make the pattern at the cup center
4. Do not use hands or other objects to touch the moving parts, to avoid be involved
in when printing
1. Don’t twist, don’t bend the power cord, differently farewell the cable
can remain bared or absolutely break
2. When disconnect the power cord , grasp and pull the connector, not the cord.
3. Please do not connect the cable to the improper socket or other devices
4. Forbid non-specialized person to open the rear cover for maintenance
5. Ifthepower cordbecomeslost,damaged, please contact your dealer for a
suitable replacement
6. Please disconnect power supply when clean the device
Power Supply
Setting
1. It can not print if the FancyBox do not install correctly
2. Please ensure to place the appliance on a hard, flat level surface
www.evebot.cc
Table of contents
