Evenflo Snugli User manual

More children are killed every year as passengers in
car crashes than by any other type of injury.
To reduce the risk of SERIOUS INJURY or DEATH, read
this owner’s manual and your vehicle owner’s manual
before installing and using this child restraint. Using a child
restraint makes a big difference. By properly using this
child restraint and following these instructions (and the
instructions that accompany your vehicle), you will greatly
reduce the risk of serious injury or death to the child from
a crash. Do not be misled by the commonly used term
“safety seat”; no restraint system can prevent all injuries in
all crashes. Many properly restrained adults and children
are injured in motor vehicle crashes, including relatively
minor crashes. A properly used child restraint is the best
way to minimize injuries to the child and to increase the
chances for the child’s survival in most crashes.
• No restraint can guarantee absolute protection from
injury in every crash.
• This child restraint is designed for use by children in
forward-facing and booster modes.
To use this child restraint properly, children MUST
meet weight/size specifications as follows:
For 5-pt Harness Use
• The child weighs 10 – 29.4 kg (22 – 65 lbs)
• The child is 71 – 127 cm (28 – 50 in.) AND
the tops of their ears are at (or below) the child
restraint headrest.
• Child is one year old or older.
For Booster Use
• The child weighs 18 – 49.8 kg (40 – 110 lbs)
• The child is 110 – 145 cm (43.3 – 57 in.) tall
AND the tops of their ears are below the child
restraint headrest.
• Child is four years old or older.
U.S. REGULATORY NOTICE
This child restraint meets all applicable requirements of
Federal Motor Vehicle Safety Standard 213.
For Canadian Models
CANADIAN REGULATORY NOTICE
This child restraint meets all applicable requirements of
Canadian Motor Vehicle Safety Standards CMVSS 213
and 213.2.

1
Symbol Legend
Airbag Symbol – Alerts you to important
information about airbag safety.
LATCH Symbol – Alerts you to important
information about LATCH safety.
Tether Anchor Symbol – Alerts you to
important information about tether anchor safety.
Table of Contents
Important Information
Warnings .................................................................. 2
Safe Practices ........................................................... 7
Recall Information for U.S Customers ........................ 8
Public Notice for Canadian Customers ..................... 8
Motor Vehicle/Aircraft Usage .................................... 8
LATCH Information .................................................. 9
Care and Cleaning ................................................... 9
Visual Glossary ....................................................... 10
Using the Internal 5-pt Harness
Installation Checklist .............................................. 13
Which Type of LATCH Connectors Are on Your
Child Restraint? ................................................... 14
Installation with LATCH Hook.................................. 14
Installation with SureLatch Connectors ................. 17
Installation with Quick Connectors ......................... 21
Installation with Vehicle Seat Belt ........................... 24
Securing the Child ................................................. 27
Removing the Child ............................................... 29
Positioning the Harness Strap ................................. 30
Positioning the Crotch Strap .................................. 32
Using a Booster Seat
When to Put Your Child in a Booster Seat ............... 34
Booster Installation Checklist .................................. 37
Converting into a Booster Seat ............................... 38
General Information
Leveling the Booster Seat ........................................ 42
Using the Latch Hook Connectors ........................... 42
Using the SureLatch Connectors ............................ 42
Using the Quick Connectors ................................... 42
Adjusting the Headrest ........................................... 43
Using the TruTether Adjuster .................................. 43
Installing the Locking Clip ....................................... 44
Removing Seat Pad ................................................ 46
Removing Headrest Pad ......................................... 46
Replacement Parts ................................................. 47
Limited Warranty ................................................... 49
™
™
™

WARNING
2
Air Bag Warnings
•DO NOT use this restraint in the front seat of a vehicle
equipped with an air bag. Air bags may cause serious
injury or death to children 12 years of age and under.
If your vehicle has an air bag, refer to your vehicle
owner’s manual for child restraint installation.
• If the rear seat of your vehicle is equipped with side
air bags, refer to the following information for proper
usage.
Vehicles built prior to the 2002 model year:
DO NOT use this restraint in a vehicle seating position
equipped with a side air bag unless authorized by the
vehicle manufacturer.
Model year 2002 and newer vehicles:
Refer to your vehicle owner’s manual before placing
this restraint in a seating position equipped with a side
air bag.
• DO NOT place any objects between the restraint and
the side air bag, as an expanding air bag may cause
the items to strike the child.
The back seat is the safest place for
children 12 and under.

WARNING
General Warnings
• Failure to follow installation instructions can result in
the child striking the vehicle’s interior during a sudden
stop or crash. Serious injury or death may result.
These instructions and the instructions in your vehicle
owner’s manual must be followed carefully. If there is a
conflict between the two, the vehicle owner’s manual
regarding child restraint installation must be followed.
•NEVER leave child unattended.
•DO NOT use child restraint if it is damaged, broken, or
missing parts.
•DO NOT use this restraint if it has been involved in a
crash. It must be replaced.
•NEVER use this child restraint without the headrest
installed.
•NEVER use this child restraint rear-facing.
Location Warnings
• ALWAYS read and follow exactly the instructions that
accompany your vehicle and child restraint.
• According to statistics, children are safer when properly
restrained in a rear seating position than in the front
seating position. Generally, the center rear position is
safest and should be used if available.
• Some child restraints do not fit all vehicles or all seating
locations. There are many thousands of combinations
of vehicle makes, models, child restraint configurations,
seat belt designs, and seat cushion shapes.
The easiest way to determine whether the child
restraint is suitable for a particular seating position is
to check for a tight installation. If the child restraint
cannot be properly installed, DO NOT use the child
restraint. Consult vehicle owner’s manual, try a different
seating location or call Evenflo.
• ONLY use this child restraint on forward-facing
vehicle seats. DO NOT use this restraint with vehicle
seats that face the rear or side.
• ONLY use this child restraint on vehicle seats with
backs that lock into place.
3

Forward-facing Position Warnings
• If the child weighs more than 29.4 kg (65 lbs) or their
shoulders are above the highest harness level, you
MUST use this child restraint as a booster (p. 34).
• Adjust, or remove, the vehicle headrest, in the seat
where the child restraint is to be fastened, so that
the back of the child restraint rests against the vehicle
seat back.
• The headrest on the vehicle seat in front of the child
should be put in its lowest position. The vehicle seat
back that the child faces must be fully padded and
free of any hard objects.
Seat Belt Warnings
For 5-point Harness Use Only
•DO NOT use this child restraint if it moves more than
25 mm (1 inch) forward or side-to-side at the vehicle
belt path. Serious injury or death may result from
poor installation. If you cannot tightly secure the child
restraint, try again or move it to another location.
For Both 5-point Harness and Booster Use
•DO NOT use this child restraint in a vehicle with
door-mounted seat belts.
•DO NOT use this child restraint in a vehicle with seat
belts that automatically move along the vehicle frame
when the door is opened. These seat belts will not
hold a child restraint properly.
• If the vehicle seat belts are not routed and fastened
correctly, the child restraint may not protect the child
in a crash.
•DO NOT allow the seat belt release button to touch
the child restraint. Accidental contact may cause the
seat belt to release. If necessary, turn the seat belt
release button away from the child restraint or move
the child restraint to a different location.
• Failure to adjust the harness or vehicle seat belts
snugly around the child may result in the child
striking the vehicle’s interior during a sudden stop
or crash. Serious injury or death may occur.
• Remove locking clip from vehicle seat belt when not
used with a child restraint, or the vehicle seat belt will
not properly restrain an adult or child. Serious injury or
death may occur.
4
WARNING

5
Seat Belt Warnings
For Booster Use Only
• When using this booster seat, NEVER use a lap belt only.
You MUST use vehicle seat belts that have a
lap/shoulder combination.
•DO NOT use the locking clip when using this child
restraint as a booster seat.
• The shoulder belt MUST be threaded through the
shoulder belt guide (p. 36).
•DO NOT use this booster seat if the child’s ears are
above the back of the booster seat headrest.
• The shoulder belt MUST NOT cross the child’s neck
or fall off the child’s shoulder. If you cannot adjust
the shoulder belt to properly lay midway between
the child’s shoulder and neck AND at or above the
shoulder, try another seating location or do not use
the booster seat.
LATCH Warnings
For 5-point Harness Use Only
• This LATCH system is intended to be used ONLY as
described in these instructions. Serious injury or death
may result from misuse.
• In addition to these instructions, read and follow your
vehicle owner’s manual regarding installation of the
child restraint and LATCH. If there is a discrepancy,
follow your vehicle owner’s manual.
•ONLY use for securing child restraint to lower LATCH
anchor points.
• NEVER attach two LATCH connectors to one vehicle lower
anchor point.
• NEVER use the vehicle seat belts when using the
LATCH straps. Using both together can cause slack in a
sudden stop or crash.
• When not in use, the LATCH harness and connectors
should be securely stored on child restraint. Keep out
of reach of children.
•ALWAYS be sure that the LATCH connectors are fully
engaged onto the LATCH anchor points by pulling
hard on the LATCH harness. If they are not totally
engaged, the LATCH system will not secure the child
restraint. Serious injury or death may result.
WARNING

LATCH Warnings – cont.
For 5-point Harness Use Only
•DO NOT use this child restraint if it moves more than
25 mm (1 inch) forward or side-to-side at the vehicle
belt path on the child restraint. Serious injury or death
may result from poor installation. If you cannot tightly
secure the child restraint, try again or move it to
another location.
Tether Strap Warnings
• To avoid a strangulation hazard, you MUST tightly roll
or fold excess or unused tether strap and secure with
a rubber band. Attach the tether hooks to the storage
clips when not in use (p. 11). This will keep an unused
tether from hitting someone during a crash.
Additional Warnings
• In hot or sunny weather, ALWAYS check the seat, the
buckle and LATCH hooks, and adjuster for hot areas
before placing a child into the child restraint. The child
could be burned. Cover the child restraint with a light
colored blanket when you leave the vehicle.
• In cold weather, DO NOT dress the child in bulky
clothing like snowsuits if the child is riding in a child
restraint. Bulky coats/snowsuits make it difficult to
properly tighten the harness to the child which may
allow the child to be ejected from the restraint during
a crash. If necessary, place a blanket over the
harnessed child without interfering with the child
restraint harness system.
• This child restraint must be securely fastened to the
vehicle, even when unoccupied, using the vehicle
seat belts or LATCH connectors. An unsecured child
restraint may injure someone if a crash occurs.
• DO NOT use the cup holder to store cans or hard
cups. Only for use with soft cups (such as styrofoam
or paper).
•DO NOT place any cups that contain hot liquids (such
as coffee or tea) in the cup holder.
• DO NOT attach additional items to this child restraint
that are not approved by Evenflo. Items not tested with
the child restraint could injure the child.
WARNING
6

7
• Failure to follow installation instructions could result in
serious injury or death. These instructions and the
instructions in your vehicle owner’s manual must be
followed carefully. If there is a conflict between the
two, the vehicle owner’s manual regarding child
restraint installation must be followed.
WARNING
• Everyone rides buckled up or the vehicle does
not go. Make no exceptions for adults or children.
If someone unbuckles, stop the vehicle. Being firm
and consistent from the start will mean fewer discipline
problems as children get older. An unrestrained person
can be thrown into and injure other passengers.
• NEVER try to tend to a crying baby’s needs while
driving. NEVER take a baby out of a child restraint for
comforting while the vehicle is moving.
• DO NOT allow a child in a vehicle to have objects
such as lollipops or ice cream on a stick. The object
can injure the child if the vehicle swerves or hits a
bump.
• DO NOT feed an infant who is riding in a child
restraint.
• Put sharp or heavy items in the trunk. Anything loose
can be deadly in a crash.
Safe Practices

8
Motor Vehicle/Aircraft Usage
• Child restraints could be recalled for safety reasons.
You must register this restraint to be reached in a
recall. Send your name, address, the restraint’s
model number, and manufacturing date to Evenflo
Company, Inc., 1801 Commerce Dr., Piqua, OH
45356 or call 1-800-233-5921. You may also register
online at:
www.evenflo.com/registercarseat
• For recall information, call the U.S. Government’s
Vehicle Safety Hotline at 1-888-327-4236
(TTY:1-800-424-9153), or go to:
www.NHTSA.gov
Recall Information for U.S. Customers
Public Notice for Canadian Customers
• To register your child restraint, return your registration
card, call 1-937-773-3971, or register online at:
www.evenflo.com/registercarseatcanada
• For recall information, call Transport Canada at
1-800-333-0510 (1-613-993-9851 in Ottawa region)
or Eveno at 1-937-773-3971.
When used with the internal harness and properly
installed pursuant to these
instructions, this restraint is certified
for use only in passenger and
multi-purpose passenger motor
vehicles, buses, and trucks
equipped with Type I or II seat
belts and in aircraft.
When used without the internal
harness (in booster mode) and properly installed pur-
suant to these instructions, this restraint is certified for
use only in passenger and multi-purpose passenger motor
vehicles, buses, and trucks equipped with Type II seat belts.
In booster mode, this restraint is NOT certified for aircraft
use. A belt-positioning booster requires the use of a lap/
shoulder belt system, which is not available on aircraft.
Check with
your airline before
departure to make sure
this restraint meets
their requirements.
Tip!
Tip!

9
LATCH Information
“LATCH” (Lower Anchors and Tethers for CHildren) is a
system for attaching the child restraint to your vehicle
seat. It can be used in place of the seat belts in vehicles
with LATCH anchors. Refer to your vehicle owner’s
manual for the locations of LATCH anchors. Note: Your
vehicle owner’s manual may refer to this system as
”ISOFIX” or “Lower Universal Anchorage System (UAS).”
• Tohelpprotectthe
vehicle upholstery, place a
towel beneath and behind
the child restraint.
Tip!
Tip!
For future reference, record the model number of your child
restraint AND the date of manufacture below.
Model Number:
Date of Manufacture:
• DO NOT lubricate or immerse the LATCH connectors,
the buckle, or any part of this child restraint.
• Plastic and metal parts may be wiped clean with
mild soap and water and dried with a soft cloth.
Do not use abrasive cleaners or solvents.
• Take care not to damage any labels.
• The harness can be wiped clean with mild soap and
water. Allow harness to air dry. DO NOT immerse
buckle in water.
• Machine wash the seat pad separately in cold water,
delicate cycle, and tumble dry 10 to 15 minutes on
low heat.
• NEVER use child restraint without the seat pad.
Care and Cleaning

Visual Glossary
Your vehicle components may be significantly different than pictured.
Consult your owner’s manual to help you identify your vehicle components.
Back Seat
Belt Buckles
Center Lap
Belt
Tether Anchors
Forward-facing
ONLY
Back Seat
Belt Retractor
Seat Crease
Lap/Shoulder
Belt
LATCH
Anchors
Fold-down Armrest
Consult your vehicle’s
owners manual.
Rear
Headrests
IMPORTANT: If your vehicle has side air bags, please refer to the
warnings on page 2.
10
5-pt Harness
Straps
Chest Clip
Harness
Release Button
Headrest
Shoulder Belt Guide
Buckle
Harness
Adjust Strap
Lower Belt Path
Guide*
Lower Belt Path
Guide*
Cup Holder* Cup Holder*
* Not available on all models.

Visual Glossary
Front Seat
Retractor
120
4
A I R B A G
20
30
10
Front Seat Lap
and Shoulder Belts
Front
Headrests
Consult your vehicle
owner’s manual to determine
proper placement of child restraint
in your vehicle and familiarize
yourself with your vehicle’s
components.
imporTanT
imporTanT
11
NO coloque el asiento infantil orientado
hacia atrás en el asiento delantero con
bolsa de aire.
Puede causar MUERTE o LESIONES
GRAVES. El asiento trasero es el lugar más
seguro para los niños de 12 años de edad y
Locking Clip
Tether Strap and Hook
(Shown fastened to storage clip)
Headrest
Instructions
Upper Belt Path
Upper Belt Path
SureLatch
Connector*
SureLatch
Connector*
Model Number &
Date of Manufacture
Splitter Plate
LATCH Guide LATCH Guide
Tether Strap Adjuster
(Push Button Release)
OR
Tether Strap Adjuster
(Lever Release)
* Not available on all models.

IMPORTANT
Evenflo strongly recommends using the top
anchorage (tether) strap when using this seat
with the internal harness. Using the tether strap
will improve the stability of the child restraint
and may reduce the risk of injury.
Tether Strap
The 5-pt Harness
straps are at, or
slightly above, the
child’s shoulders.
SureLatch Connector
Using the Internal
5-pt Harness
If the child weighs more than 29.4 kg (65 lbs) or
their shoulders are above the highest harness level,
you MUST use this child restraint as a Booster.
WARNING
12
Child Requirements
Weight: 10 – 29.4 kg (22 – 65 lbs)
Height: 71 – 127 cm (28 – 50 in.)
AND the tops of the child’s ears are at,
or below, the child restraint headrest.
Age: At least one year old

Using with the 5-pt Harness
13
Installation Checklist
1. Secure child restraint to the vehicle seat.
aLocking clip is installed, if necessary (p. 44).
aIf the child weighs 21.7 kg (48 lbs) or LESS,
the child restraint is securely installed with one
of the following methods through the upper
belt path:
• *LATCH Hooks (p. 14)
• *SureLatch Connectors (shown at left) (p. 17)
• *Quick Connectors (p. 21)
• Vehicle Seat Belt (p. 24)
aIf the child weighs MORE than 21.7 kg
(48 lbs), the child restraint is securely installed
with the VEHICLE SEAT BELT ONLY (not LATCH)
through the upper belt path (p. 24).
aTether strap is attached and tightened (p. 20, 23,
or 26).
2. Place the child in the child restraint.
aThe child’s back and bottom are flat against the
back and bottom surfaces of the child restraint.
aThe tops of the child’s ears MUST be at, or below,
the top of the child restraint headrest.
3. Make necessary adjustments.
aThe 5-pt Harness is no more than two-finger
widths from child (p. 28).
aCrotch strap is properly positioned (p. 32).
4. Fasten both buckle tongues. Refer to page 27.
5. Position and connect chest clip.
aChest clip MUST be at armpit level (p. 28).
6. Check your work.
aTo properly protect the child, the child restraint
MUST NOT move more than 25 mm (1 inch)
from side-to-side or from front-to-back at the
upper belt path.
*To determine which LATCH connector is on your child
restraint, go to page 14.

14
Which Type of LATCH Connectors Are
on Your Child Restraint?
SureLatch™
Connector
In order to properly install your child restraint with the
LATCH system, you must first know which type of LATCH
connectors are present on your child restraint.
• If your child restraint has LATCH Hook Connectors,
begin installation by referring to “Installation with LATCH
Hook Connectors,” below.
• If your child restraint has SureLatch Connectors, begin
installation by referring to page 17, “Installation with
SureLatch Connectors.”
• If your child restraint has the Quick Connectors, begin
installation by referring to page 21, “Installation with
Quick Connectors.”
LATCH Hook
Connector
IMPORTANT:
• If you are using the vehicle seat belt to secure the child
restraint, DO NOT use the LATCH connectors.
•Installthischildrestraintwiththevehicleseatbelt
(NOT LATCH connectors) if the child weighs more than
21.7 kg (48 lbs).
•Somevehiclemanufacturershavelowermaximum
weight ratings for LATCH anchors. Consult your vehicle
owner’s manual, or call the vehicle manufacturer, to
confirm the limits on your vehicle’s LATCH anchors.
1. Disconnect tether
hook and LATCH
Hook Connectors
from the back of
the child restraint.
Quick
Connector™
Installation with LATCH Hook Connectors

Tether Strap
2. Place the child restraint in position.
Set child restraint on vehicle seat in forward-facing
position, as shown. Lay the tether strap over the
back of the vehicle seat.
LATCH
Lower Anchor
LATCH
Lower Anchor
Near Side Far side
3. Attach LATCH Hook Connectors.
Attach a LATCH Hook Connector onto each seat
anchor.
IMPORTANT: Make sure both LATCH connectors are facing
upward and the harness straps are not twisted.
15
Using with the 5-pt Harness
Installation with LATCH Hook Connectors

4. Secure the child
restraint.
Using your full weight,
push the child restraint
firmly into the vehicle
seat while pulling up
on the LATCH strap to
tighten.
LATCH
Belt Path
IMPORTANT: To properly protect the child, the child
restraint MUST NOT move more than 25 mm (1 inch) from
side-to-side or from front-to-back at the LATCH belt path.
If you cannot tightly secure the child restraint, try again or
move it to another location.
5. Connect and tighten tether strap.
Connect the tether hook to the anchor behind
the vehicle seat, as shown.
Pull the strap and tighten the tether securely.
IMPORTANT: If your tether strap is too short to reach
from the child restraint to your vehicle tether anchor,
you will need a Tether Extender. Please call ParentLink.
Notice
Your child restraint is equipped with one of two types of
tether adjusters: standard (shown above) or the TruTether
(shown below). If your child restraint is equipped with the
TruTether adjuster, refer to page 43 for information about
proper tightening.
16
TruTether Adjuster
Tightness Indicator
Display
Installation with LATCH Hook Connectors

IMPORTANT:
•Ifyouareusingthevehicleseatbelttosecurethe
child restraint, DO NOT use the LATCH system.
•Installthischildrestraintwiththevehicleseatbelt
(NOT LATCH connectors) if the child weighs more
than 21.7 kg (48 lbs).
•Somevehiclemanufacturershavelowermaximum
weight ratings for LATCH anchors. Consult your vehicle
owner’s manual, or call the vehicle manufacturer, to
confirm the limits on your vehicle’s LATCH anchors.
1. Disconnect tether
hook from the back
of the child
restraint.
17
2. Place the child
restraint in position.
Set child restraint on
vehicle seat, as shown.
Lay the tether strap over
the back of the vehicle
seat.
Tether Strap
Using with the 5-pt Harness
Installation with SureLatch Connectors

18
LATCH Anchor LATCH Anchor
Near Side
3. Attach SureLatch Connectors.
With the SureLatch harness through the upper belt
path, as shown above, push each SureLatch connector
onto each seat anchor.
Note: You may need to vary the angle of the SureLatch
connectors, as shown above, to attach to the anchor.
IMPORTANT: Position the
SureLatch connectors so they
are facing upward, sitting
above the LATCH guide, as
shown, and the straps are
not twisted.
Strap
Far Side
Installation with SureLatch Connectors
LATCH
Guide
Upper
Belt Path
Upper
Belt Path